Hansol D19BL Manuel utilisateur



User’s Guide

920D+(D19BL)

COLOR MONITOR

Regulatory Information.......................................................................................................................... 2

Introduction

Features ...................................................................................................................................................3

Controls

OSD Controls ...........................................................................................................................................4

OSD Menus ..............................................................................................................................................5

Power Management Feature................................................................................................................. 8

Standard Signal Table ............................................................................................................................ 8

Specifications .......................................................................................................................................... 9

Pin assignment table D-Sub Mini 15pin connector ...................................................................... 10

Troubleshooting .....................................................................................................................................11

Table of Contents

Color Monitor

Regulatory

Information

- FCC Information

Caution

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s

authority to operate the equipment.

- Canadian Notice This Class B digital apparatus meets all requirements of the Canadian Interference Causing Equipment Regulations.

- Avis Canadien Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel brouilleur du

Canada.

- Energy Star As an ENERGY STAR partner, Hansol Electronics Inc. has determined that this product meets energy Star

guidelines for energy efficiency.

Notice

The information contained in this document is subject to change without notice.

This equipment has been tested and found to comply with limits for a class B digital device, pursuant to Part 15 of

the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a

residential installation.

This equipment can generates, uses, and radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation.

If this equipment does cause unacceptable interference to radio and television reception, which can be determined

by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the

following measures.

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced Radio/TV technician for help.

Color Monitor

Introduction

- Features 19-inch (18 inch visual) high performance display color monitor

Automatically scans frequencies from

- Horizontal frequency: 30 to 96KHz

- Vertical frequency: 50 to 160Hz

Compatible with VGA, SVGA, VESA, MAC Standards and maximum resolution modes up to 1600 ×1200

Supports VESA flicker free modes including 85Hz refresh rate.

On Screen menu fingertip control system to visually select and adjust screen images using control buttons on

front panel and on screen menus.

Power supply operates on AC 100-240V( ±10%), 50/60Hz for use all over the world.

Power supply operates on AC 220-240V( ±10%), 50/60Hz for use all over the world.(Europe Version)

Equipped with DDC 2B for Plug & Play capability.

Equipped with an energy-saving feature.

Power management circuit signaled by the computer system, will reduce power consumption when the

computer system is not in use.

Monitors with nonglare/antistatic screens are compliant with MPR

1990 Emissions standards and meets requirements for CE Marking.

※TCO : (option)

Color Monitor

Controls

- OSD controls

Accessing OSD

Press MENU Button.

－: Direct Brightness access.

+ : Direct Contrast access.

EXIT from OSD

: Press this ( ) button in the main menu and submenu.

Additional front controls

※ Power Switch : Turn the monitor power on or off, When the power is on, the LED is lit.

The OSD apears on the screen when you press MENU button.

“ON SCREEN MENU” controls include the following extended controls such as Size, Position, Geometry

Distortion, Color Temp., Degauss, Moire on & off, Language, OSD-Position, Recall, Cont. & Brt., etc.

Color Monitor

Controls

OSD MENU CONTROL

1. NO OSD

• －Proceeds to NO.3

• + Proceeds to NO.4

•No meaning

2. MAIN MENU

• －+ Moves to function to choose.

•Exit the OSD controls.

• MENU : Proceed to the selected menu.

3. BRIGHTNESS

• －Proceed to the Brightness menu.

• －+ Increases or decrease the Brightness.

4. CONTRAST

• + Proceed to the Contrast menu.

• －+ Increases or decrease the Contrast

5. H/V-POSITION

position and size Menu control guide

: exit to the main menu.

－/ + : Refer to －/ +

MENU :Toggle Horizontal and Vertical directly.

• After choosing , push MENU button.

• MENU : Push this button again & again to change the H/V-position.

• －: Moves the image left or down.

• + : Moves the image right or up.

- OSD Menu

Color Monitor

6. H/V-SIZE

• After choosing , push MENU button.

• MEUN : Push this button again & again to change the H/V-size.

• －: Decrease the Horizontal or Vertical size of the image.

• + : Increase the Horizontal or Vertical size of the image.

7. GEOMETRY

The Geometry controls allow you to adjust the curvature or angle of

displayed image.

• After choosing , push MENU button.

• Pincushion : Increase or decrease the curvature of the sides either inward

or outward.

• Parallelogram : Increase or decrease the tilt of the sides either to the left

or right.

• Trapezoid : Increase or decreases the bottom of the screen to be the same

as the top.

• Pin Balance : Increase or decrease the curvature of the sides.

• Top Corner : Increase or decreases the curvature of the top sides.

• Bottom Corner : Increase or decrease the curvature of the bottom sides.

• Rotation : Rotate the entire display to clockwise or counterclockwise.

Geometry Menu control guide

: Exit to the main menu.

－/ + : Move the function to choose.

MENU : Function to choose.

－/ + : Increase or decrease the adjustment.

8. MOIRE

• After choosing , push MENU button.

• Select ON or OFF with －/ + key.

• Select H.MOIRE or v.MOIRE with －/ + key.

• －/ + : Adjust the Moire Control.

Color Monitor

9. LANGUAGE

• After choosing , push MENU button.

• －/ + : Select the language.

10. OSD POSITION

• After choosing , push MENU button.

• MENU : Push this button again & again to change the H/V-OSD position.

• －: Move the OSD position left or down.

• + : Move the OSD position right or up.

11. COLOR TEMP ※Presetting : Select the desired color setting.

The bar is replaced by the color setting choice.

" USER, 6500k, 9300k "

Color adjustment is available only in USER mode.

• －/ + : Move the bar with －or + key to select the user

• MENU : Press MENU button to access the sub-menu.

• －/ + : Increcse or decrease the selected color adjustment.

• : Exit to the main menu.

Controls ICON Function

Degauss

This control removes the build-up of magnetic fields that can

affect color purity and convergence.

Note : The picture shakes while degaussing is taking place.

After internal degaussing the circuitry takes about

30 minutes to regain its maximum power.

Recall

This controls recalls certain factory setting such as size,

position, geometry and color by pressing MENU button.

If the monitor is operating in a user mode, this controls has

no effect.

Zoom －/ + : Increase or decrease the Vertical and Horizontal size

of image at the same time.

Color Monitor

Power

Management

Feature

The monitor is equipped with a power saving circuit that confirms to the world-standard Display Power Manager

Signalling (DPMS) mode of Video Electronics Standard Association(VESA).

The power management feature requires that the video card of the computer should support DPMS function.

Standard Signal

Table

Status LED Sign Power Consumption

Normal mode Green ON 110 Watts

Stand-by mode Green Blinking(0.5Sec) Less than 15 W

Power-Off mode Green Blinking(1Sec) Less than 5 W

Resolution Horizontal

Frequency(kHz)

Vertical

Frequency(Hz)

Clock Frequency

(MHz)

Sync Polarity

(H/V)

VGA (720 x 400) 31.469 70.087 28.322 －/ +

VGA (640 x 480) 31.469 59.940 25.175 －/ －

VGA (640 x 480) 37.500 75.000 31.500 －/ －

VGA (640 x 480) 43.269 85.008 36.000 －/ －

SVGA (800 x 600) 46.875 75.000 49.500 + / +

SVGA (800 x 600) 53.674 85.061 56.250 + / +

XGA (1024 x 768) 60.023 75.029 78.750 + / +

XGA (1024 x 768) 68.677 84.997 94.500 + / +

SXGA (1280 x 1024) 79.976 75.025 135.000 + / +

SXGA (1280 x 1024) 91.146 85.024 157.500 + / +

UXGA (1600 x 1200) 93.750 75.000 202.500 + / +

No image is displayed with Green blinking

Monitor is in power saving mode.

Use mouse or keyboard to release power saving mode.

No image is displayed without LED on.

Power cable plug must be pulled out.

Check the power plug on monitor and on the wall.

"Out of range" displayed on the screen.

This message is displayed when the signal from video card exceeds the maximum

frequency of the monitor. Readjust resolution and frequency in accordance with the monitor

capacity.(Refer to Standard Signal Table)

Color Monitor

Specifications

ITEM 920D+(D19BL)

CRT Type 19", 90°deflection, FLAT

CRT Horizontal Dot pitch 0.20mm

CRT Surface Non-glare, Anti-Reflection & Anti-Static

Input

Signal

Sync. H/V Separate, TTL, positive/negative

H/V Composite, TTL, positive/negative

Video RGB Analog (0.7Vp-p), positive

75 Ω Terminated

Scanning

frequency

Horizontal 30KHz~96KHz (Automatically)

Vertical 50Hz~160Hz (Automatically)

Maximum Resolution 1600Dots x 1200Lines (Non-interlace)

Pixel Clock(Max.) 210 MHz

Display Size (Standard) Horizontal 350mm, Vertical 262mm

Power Consumption(Max.) 110 Watts

Power Supply AC 100~240V( ±10%), 50/60Hz ±3Hz

AC 220~240V( ±10%), 50/60Hz ±3Hz (Europe Version)

Input Connector D-Sub, 15Pin Connectors(3layer)

Display Colors Unlimited

Dimension Unit 18.5" (W) x 18.4" (D) x 18.3"(H) / 470mm(W) x 466.5mm(D) x 466mm(H)

Carton 22.6" (W) x 24.4" (D) x 22.2"(H) / 573mm(W) x 620mm(D) x 564mm(H)

Weight Net 47.3lbs (21.5kg)

Gross 55lbs (25kg)

Temperature

Operating 32°F to 104°F (0°C to 40°C)

Storage -4°F to 140°F (-20°C to 60°C)

Humidity 10% to 85% R.H. Non-condensing

Color Monitor

Pin assignment

table D-Sub Mini

15pin connector

The 15-pin D-Sub connector

(male) of the signal cable

(IBM Systems) :

610

11 15

(15 Pin D-Sub)

Pin No. Assignment

1Red Video

2 Green Video

3Blue Video

4 Frame Ground

5Ground

6 Red Video Ground

7Green Video Ground

8 Blue Video Ground

9 N.C

10 ID

11 Monitor Ground

12 SDA

13 H-Sync

14 V-Sync

15 SCL

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Hansol Moniteur

Hansol

Hansol 920A Manuel utilisateur

Hansol

Hansol B15BF Manuel utilisateur

Hansol

Hansol H550 Manuel utilisateur

Hansol

Hansol H750D Manuel utilisateur

Hansol

Hansol 730E Manuel utilisateur

Hansol

Hansol D19AL Manuel utilisateur

Hansol

Hansol D17CL Manuel utilisateur

Hansol

Hansol D17CL Manuel utilisateur

Hansol

Hansol 700Fs Manuel utilisateur

Hansol

Hansol H950 Manuel utilisateur

Hansol

Hansol E19AL Manuel utilisateur

Hansol

Hansol 19Inch (Viewable size 18 ) High Resolution Color Monitor... Manuel utilisateur

Hansol

Hansol H700TD Manuel utilisateur

Hansol

Hansol B19CL Manuel utilisateur

Hansol

Hansol H750D Manuel utilisateur

Hansol

Hansol H550 Manuel utilisateur

Hansol

Hansol 730D Manuel utilisateur

Hansol

Hansol H750 Manuel utilisateur

Hansol

Hansol H530 Manuel utilisateur

Hansol

Hansol H950VI B19BF Manuel utilisateur

Hansol

Hansol 520f Manuel utilisateur

Hansol

Hansol D17DL Manuel utilisateur

Manuels Moniteur populaires d'autres marques

Linear Acoustic

Linear Acoustic LQ-1000 Manuel utilisateur

AOC

AOC I2579V Manuel utilisateur

Gateway

Gateway FPD1520 Manuel utilisateur

Furuno

Furuno Mu 120c Manuel utilisateur

Asus

Asus VB171D - 17" LCD Monitor Manuel utilisateur

Dell

Dell S2230MX Instructions d'utilisation

Philips

Philips 107C64 Manuel utilisateur

Dell

Dell S2409WFP Manuel utilisateur

EverFocus

EverFocus EN-7517E Manuel utilisateur

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Manuel utilisateur

Dell

Dell Precision 7680 Mode d’emploi

LG 50PM1M - - 50" Plasma Panel Manuel utilisateur

Bosch

Bosch DDU 9 Manuel utilisateur

Acer

Acer A231HL Manuel utilisateur

Philips

Philips 86BDL4152T Manuel utilisateur

NEC

NEC AccuSync LCD5V Manuel utilisateur

Emay

Emay SleepO2 Manuel utilisateur

IBM

IBM 6360 Instructions d'installation