Warning
Installation should be performed by an installer who is skilled in the proper use of hand and power tools,
knowledge of local building and fire codes, and who is familiar with the environment behind the wall or ceiling
where the speaker is being installed. No attempt should be made to install these loudspeakers unless you are
sure you will not be cutting through electric cables, water or gas pipes, or supporting joists. Ensure the loading on
the wall or ceiling will support the weight of these assemblies.
SAFETY INFORMATION
Important Safety Instructions
1. Read these instructions - for all components before using this product.
2. Keep these instructions - for future reference.
3. Heed all warnings - on the product and in the owner’s guide.
4. Follow all instructions.
5. Do not use this apparatus near water or moisture - Do not use this product near a bathtub, washbowl, kitchen sink, laundry
tub, in a wet basement, near a swimming pool, or anywhere else that water is present.
6. Clean only with a dry cloth . Unplug this product from the wall outlet before cleaning.
7. Do not install near any heat sources, such as radiators, heat registers, stoves, or other apparatus that produce heat.
8. Only use attachments/accessories specified by the manufacturer.
9. Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where
they exit from the apparatus.
10. Unplug this apparatus during lightning storms or when unused for long periods of time - to prevent damage to this product.
11. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way:
such as power supply cord or plug is damaged; liquid has been spilled or objects have fallen into the apparatus; the apparatus
has been exposed to rain or moisture, does not operate normally, or has been dropped - Do not attempt to service this product
yourself. Opening the enclosure may expose you to dangerous voltages or other hazards. Please call us to be referred to an
authorized service center near you.
12. To prevent risk of fire or electric shock, avoid overloading wall outlets, extension cords, or integral convenience
receptacles.
13. Do not let objects or liquids enter the product - as they may touch dangerous voltage points or short-out parts that could
result in a fire or electric shock.
14. See product enclosure for safety-related markings.
STEP 1:
Cut the cutout template along the
dotted line and use a pencil to draw
the cutout aid along the edge of the
template.
STEP 2:
Speaker line connected to the rear
speaker terminals, "positive then
positive, negative then negative”.
STEP 3:
Stabilize the speaker with both
hands into the hole.
STEP 4:
Use a screwdriver to tighten the
screw clockwise to release the hand
after testing firmly, then cover the
net cover.
26CT
INSTALLATION STEPS
21
