HANNspree HANNSbaseball Manuel utilisateur

Table of Contents

REGULATORY INFORMATION.................................................................. 2

RECYCLING INFORMATION...................................................................... 4

SAFETY NOTICE ........................................................................................ 5

PREFACE .................................................................................................... 8

BEFORE YOU OPERATE THE MONITOR................................................. 9

FEATURES....................................................................................... 9

CHECKING THE CONTENTS OF THE PACKAGE ......................... 9

POWER .......................................................................................... 10

CONTROLS AND CONNECTORS............................................................ 11

ADJUSTING THE VIEWING ANGLE.............................................. 13

OPERATING INSTRUCTIONS.................................................................. 14

GENERAL INSTRUCTIONS........................................................... 14

FRONT PANEL CONTROL ............................................................ 15

HOW TO ADJUST A SETTING................................................................. 16

TECHNICAL SUPPORT (FAQ) ................................................................. 25

TROUBLE SHOOTING................................................................... 25

ERROR MESSAGE & POSSIBLE SOLUTION............................... 26

APPENDIX................................................................................................. 29

SPECIFICATIONS .......................................................................... 29

CONNECTOR PIN ASSIGNMENT ................................................. 31

REGULATORY INFORMATION

Before operating the monitor, please read this manual thoroughly. This manual

should be retained for future reference.

FCC Class B Radio Frequency Interference Statement

This equipment has been tested and found to comply with the limits for a Class

B digital device, pursuant to part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television reception,

which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following

measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which

the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) This device may not cause harmful interference,

and (2) this device must accept any interference received, including interference

that may cause undesired operation.

CANADA

This Class B digital apparatus meets all requirements of the Canadian

Interference-Causing Equipment Regulation.

Socket-outlet shall be near the equipment and shall be accessible.

This device complies with requirement of EMC directive

2004/108/EC with regard to Electromagnetic Compatibility, and

73/23/EEC and 93/68/EEC with regard to Low Voltage directive.

TCO’03 (TCO’03 applied model only)

Congratulations!

The display you have just purchased carries the

TCO’03 Displays label. This means that your

display is designed, manufactured and tested

according to some of the strictest quality and

environmental requirements in the world. This

makes for a high performance product, designed

with the user in focus that also minimizes the impact

on our natural environment.

Some of the features of the TCO’03 Display requirements:

Ergonomics

• Good visual ergonomics and image quality in order to improve the working

environment for the user and to reduce sight and strain problems. Important

parameters are luminance, contrast, resolution, reflectance, color rendition and

image stability.

Energy

• Energy-saving mode after a certain time - beneficial both for the user and the

environment

• Electrical safety

Emissions

• Electromagnetic fields

• Noise emissions

Ecology

• The product must be prepared for recycling and the manufacturer must have a

certified environmental management system such as EMAS or ISO 14 001.

• Restrictions on

ochlorinated and brominated flame retardants and polymers

oheavy metals such as cadmium, mercury and lead.

The requirements included in this label have been developed by TCO

Development in cooperation with scientists, experts, users as well as

manufacturers all over the world. Since the end of the 1980s TCO has been

involved in influencing the development of IT equipment in a more user-friendly

direction. Our labelling system started with displays in 1992 and is now

requested by users and IT-manufacturers all over the world.

For more information, please visit

www.tcodevelopment.com

RECYCLING INFORMATION

HANNspree Inc. cares about environmental protection strategies and in using

manufacturing methods and treatments that lend themselves to conservation

and recycling devices at the end-of-life.

Our products, whenever possible, contain recyclable materials which can be

recycled into new devices. When necessary for operation, other materials may

be classified as hazardous or poisonous substances. We strongly encourage

you to research the provided information about recycling this device.

For more information, please visit

www.Hannspree.com

SAFETY NOTICE

1. Changes or modifications not expressly approved by the party responsible

for compliance could void the user's authority to operate the equipment.

2. Shielded interface cables and AC power cord, if any, must be used in order

to comply with the emission limits.

3. The manufacturer is not responsible for any radio or TV interference

caused by unauthorized modification to this equipment. It is the

responsibilities of the user to correct such interference.

WARNING:

To prevent fire or shock hazard, do not expose the monitor to rain or moisture.

Dangerously high voltages are present inside the monitor. Do not open the

cabinet. For all service issues, please refer to qualified personnel only.

PRECAUTIONS

• Do not use the monitor near water, e.g. near a bathtub, washbowl, kitchen

sink, laundry tub, swimming pool or in a wet basement.

• Do not place the monitor on an unstable cart, stand, or table. If the monitor

falls, it can injure a person and cause serious damage to the appliance. Use

only a cart or stand recommended by the manufacturer or sold with the

monitor. If you mount the monitor on a wall or shelf, use a mounting kit

approved by the manufacturer and follow the kit instructions.

• Slots and openings in the back and bottom of the cabinet are provided for

ventilation. To ensure reliable operation of the monitor and to protect it from

overheating, be sure these openings are not blocked or covered. Do not

place the monitor on a bed, sofa, rug, or similar surface. Do not place the

monitor near or over a radiator or heat register. Do not place the monitor in a

bookcase or cabinet unless proper ventilation is provided.

• The monitor should be operated only from the type of power source indicated

on the label. If you are not sure of the type of power supplied to your home,

consult your dealer or local power company.

• Unplug the unit during a lightening storm or when it will not be used for long

period of time. This will protect the monitor from damage due to power

surges.

• Do not overload power strips and extension cords. Overloading can result in

fire and / or electric shock.

• Never push any object into the slot on the monitor cabinet. It could short

circuit parts causing a fire or electric shock. Never spill liquids on the

monitor.

• Do not attempt to service the monitor by yourself; opening or removing

covers can expose you to dangerous voltages and other hazards. Please

refer all service issues to qualified service personnel.

• To ensure satisfactory operation, use the monitor only with UL listed

computers which have appropriate configured receptacles marked between

100 - 240V AC, Min. 5A.

• The wall socket shall be installed near the equipment and shall be easily

accessible.

• Do not install the monitor in a location near heat sources such as

radiators or air dusts, or in a place subject to direct sunlight, or

excessive dust or mechanical vibration or shock.

• Save the original carton and packing materials, as they will come in

handy if you ever have to ship your monitor.

• To ensure problem-free shipping, pack your monitor in the same

packing materials and carton as it was shipped from the factory.

• To keep the monitor looking new, periodically clean it with a soft

cloth. Stubborn stains may be removed with a cloth lightly dampened

with a mild detergent solution. Never use strong solvents such as

paint thinners, benzene, or abrasive cleaning products. These and

other harsh cleaning agents will damage the cabinet of the monitor.

SPECIAL NOTES ON LCD MONITORS

The following symptoms are normal with LCD monitor and do not indicate a

problem.

• Due to the nature of the fluorescent light, the screen may flicker during initial

use. Turn off the Power Switch and then turn it on again to make sure the

flicker disappears.

• You may find slightly uneven brightness on the screen depending on the

desktop pattern you use.

• The LCD screen has effective pixels of 99.99% or more. It may include

blemishes of 0.01% or less such as a missing pixel or a pixel lit all of the

time.

• Due to the nature of LCD screens, an after image of the previous displayed

content may remain if this image has been the displayed for several hours.

The LCD screen should recover if the image is changed or powered off for

several hours.

• If the screen suddenly flashes erratically or the backlighting fails, please

contact your dealer or service center for repair. Do not attempt to repair the

monitor yourself.

PREFACE

Thank you for purchasing a Hannspree Liquid Crystal Display Monitor (LCD

Monitor).

Please carefully read this manual in its entirety before setting up, using or

operating your Monitor. To ensure the safe and correct installation and

operations of the Monitor, it is important that the safety and operation

instructions in this manual are followed.

This instruction manual is designed to assist you in setting up and using the

Monitor. The information in this manual has been carefully checked for

accuracy; however, no guarantee is given to the correctness of the contents.

The information in this manual is subject to change without notice.

To the extent allowed by applicable law, Hannspree, Inc. (“Hannspree”) shall not

be liable for direct, indirect, special, exemplary, incidental or consequential

damages arising from any defect or omission in this manual, even if advised of

the possibility of such damages in advance.

notice. All brand, product, service names and logos are trademarks and/or

registered trademarks of their respective manufacturers and companies.

Screen shots are simulated.

BEFORE YOU OPERATE THE MONITOR

FEATURES

• 19” screen TFT Color LCD Monitor

• Crisp, Clear Display

• Recommended Resolutions:

19” Wide (16:10) 1440 X 900

19” (5:4) 1280 X 1024

• EPA ENERGY STAR

• Ergonomic Design

• Space Saving, Compact Case Design

• HDMI 1.1 Compatibility

CHECKING THE CONTENTS OF THE PACKAGE

The product package should include the following items:

LCD Monitor

* Note: The screen and base designs will vary from model to model. For more

information, please refer to the Quick Start Guide included with your monitor.

Screen Base

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels HANNspree Moniteur

HANNspree

HANNspree HG342PCB Manuel utilisateur

HANNspree

HANNspree Verona Manuel utilisateur

HANNspree

HANNspree HL326HPB Manuel utilisateur

HANNspree

HANNspree HC281UPB Manuel utilisateur

HANNspree

HANNspree HF-229HPB Manuel utilisateur

HANNspree

HANNspree Hanns.G HT225HPA Manuel utilisateur

HANNspree

HANNspree HP246PFB Manuel utilisateur

HANNspree

HANNspree HL400UPB Manuel utilisateur

HANNspree

HANNspree 8HAHP248UJB Manuel utilisateur

HANNspree

HANNspree HT248PPB Manuel utilisateur

HANNspree

HANNspree HC284PUB Manuel utilisateur

HANNspree

HANNspree HP247HJB Manuel utilisateur

HANNspree

HANNspree HP248PJB Manuel utilisateur

HANNspree

HANNspree 19 Inch Screen TFT LCD Monitor Manuel utilisateur

HANNspree

HANNspree HP225HFB Manuel utilisateur

HANNspree

HANNspree Hanns-G HP194DJB Manuel utilisateur

HANNspree

HANNspree HP278WJB Manuel utilisateur

HANNspree

HANNspree HL407UPB Manuel utilisateur

HANNspree

HANNspree Hanns-G HL226 Manuel utilisateur

HANNspree

HANNspree HF235DPB Manuel utilisateur

HANNspree

HANNspree HANNS.G HP246PDB Manuel utilisateur

HANNspree

HANNspree HANNS.G HS246HFW Manuel utilisateur

HANNspree

HANNspree HF255HPB Manuel utilisateur

HANNspree

HANNspree Hanns G HL225PPB Manuel utilisateur

Manuels Moniteur populaires d'autres marques

Linear Acoustic

Linear Acoustic LQ-1000 Manuel utilisateur

AOC

AOC I2579V Manuel utilisateur

Gateway

Gateway FPD1520 Manuel utilisateur

Furuno

Furuno Mu 120c Manuel utilisateur

Asus

Asus VB171D - 17" LCD Monitor Manuel utilisateur

Dell

Dell S2230MX Instructions d'utilisation

Philips

Philips 107C64 Manuel utilisateur

Dell

Dell S2409WFP Manuel utilisateur

EverFocus

EverFocus EN-7517E Manuel utilisateur

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Manuel utilisateur

Dell

Dell Precision 7680 Mode d’emploi

LG 50PM1M - - 50" Plasma Panel Manuel utilisateur

Bosch

Bosch DDU 9 Manuel utilisateur

Acer

Acer A231HL Manuel utilisateur

Philips

Philips 86BDL4152T Manuel utilisateur

NEC

NEC AccuSync LCD5V Manuel utilisateur

Emay

Emay SleepO2 Manuel utilisateur

IBM

IBM 6360 Instructions d'installation