Hanil FLETA 4 Manuel utilisateur

Operation Manual

FLETA 4

Clinical Centrifuge

Date of Purchase

Serial No.

Place of purchase

If you have and questions, contact Hanil Scientific Inc. or place of purchase.

+82-2-3472-0727

Inquiry: [email protected]

Order: [email protected]

Tech. support: techsupport@ihanil.com

The contents in this operating manual are subject to change for device improvement.

Fleta4

Research Use Only

CONTENTS

1. General Considerations-------------------------------------------------

1.1 Safety -3

1.2 Transport & Storage -4

1.3 Safety label -4

2. Product description-------------------------------------------------------

2.1 Structure -5

2.2 Delivery package -5

2.3 Technical specifications -6

3. Installation ----------------------------------------------------------------

3.1 Packing Inspection -7

3.2 Installation -7

3.2.1 Selecting the location -7

4. Operation ----------------------------------------------------------------

4.1 Operation panel -9

4.2 Opening and closing the lid -10

4.3 Loading/Unloading a rotor - 11

4.4 Loading tubes - 12

4.6 Setting RPM/RCF - 13

1.4 Electric safety information -4

5. Maintenance------------------------------------------------------------

6. Troubleshooting---------------------------------------------------------

6.1 General errors -18

4.8 Setting Accelation/Deceleration rate -14

4.9 Start/Stop -14

4.10 Saving/Calling up a program -15

5.1 Care instructions -16

5.2 Cleaning -16

4.7 Setting Run Time -13

5.3 Disposal-17

6.2 Error codes -19

7. Rotor ---------------------------------------------------------------------- 22

6.3 Emergency lid open -21

3.3 Power connection -8

4.5 Setting Rotor Id. - 13

Follow precautions and all the safety requirements described on this user manual

to prevent any damage and failure of equipment and loss of lives.

1. The centrifuge should be installed on flat surface to maintain level.

2. Check the voltage to be used, before connecting the centrifuge to the power source.

3. Only use rotors, parts, and accessories provided by Hanil Scientific Inc.

Hanil Scientific Inc. is not responsible for damages of the device and accidents caused by

using parts and accessories not recommended.

4. Do not exceed the maximum rated speed of the rotor or buckets in use.

5. Make sure to prepare necessary safety measures before using samples that are toxic or

radioactive samples or pathogenic or samples or infectious blood.

6. Substances that may generate volatile or explosive vapor can not be centrifuged.

7. The balancing work of samples should done in advance before operation.

8. To ensure safe use of the device, do not expose the device to strong acids, strong bases,

cesium, salt, or alkaline detergents.

8. If the centrifuge is contaminated by toxic or radioactive samples or infectious blood

samples, remove contaminants completely and take needful actions such as ventilation

or isolation of centrifuge.

9. Before operation, rotor and chamber should be dry.

10. Do not attempt to slow or stop the spinning rotor by hand.

11. Only centrifuge with rotor and rotor lid firmly tightened.

12. Do not block vents.

13. When serving the centrifuge, be sure to remove contaminants in advance.

14. Please contact the place of purchase or Hanil Scientific Inc. for product repairs.

15. According to IEC61010-2-020 maintain a 30cm “clearance envelope” around the

centrifuge while the rotor is spinning.

16. Turn the power switch off after using the device.

17. Unplug the power plug before cleaning or left unused for a long period of time.

1. General Considerations

1.1 Safety

3 l www.ihanil.com

1. General Considerations

1.2 Transport & Storage

• The device and the accessories

may only be stored in dry rooms

• Only lift and transport the

device with sufficient number of

helpers.

-Storage-

Ambient temperature 5℃~ 40℃

Maximum relative humidity 30%~85%

Air pressure 500~1060hpa

-Transport-

Ambient temperature -10℃~40℃

Maximum relative humidity 10%~90%

Air pressure 500~1060hpa

1.3 Safety label attached to a product

Insert tube

symmetrically.

Firmly tighten

the rotor lid.

Watch your figers

when close the lid.

Mark indicating danger

and warning.

Mark indicating a place in

danger of electric shock.

1.4 Electric safety information

1. It is recommended that switchgear or circuit breakers and overcurrent protection devices

be installed near the equipment.

2.Use a power cord only provided with equipment.

3.Use sockets with a protective earth conductor and suitable power cord.

4.Do not use an extension cord.

5.Do not place anything on the power cable

6.Do not block vents.

7.If you have the following emergencies, shut off the power supply and unplug the

power cord from outlet and contact your place of purchase.

-Unusual noises or smell from the equipment.

-Damage or wear of a power cord.

-Breakdown of circuit breaker, fuse or safety device.

-If you spill liquid on the equipment.

-If the device has been damaged.

A/S : +82-2-3452-8966 / techsupp[email protected] 4

Mark indicating earth grounding

①Lid

②Lid Latch

③RPM measuring window: Visual inspection for rotor stop or for a speed check using a tachometer.

④Chamber: Where the rotor is loaded.

⑤Lid Packing

⑥Rotor

⑦Display&Control panel: The display shows time, rpm, temperature and etc.

⑧Power switch & Power socket : On/off the centrifuge.

⑨Emergency Release Hole:

If the centrifuge lid cannot be opened, you can open the lid manually.(see 21p)

5 www.ihanil.com

①Main body

②Power Cable

③Operating manual

④Optional items: Rotors

2. Product description

2.1 Structure

2.2 Delivery package

A/S : +82-2-3452-8966 / techsupp[email protected] 6

Max. RPM 4,000 rpm

Max. RCF 3,243 xg (Swing)

2,789 xg (Fixed angle)

Max. Capacity 6 x 50 mL, 12 x 15 mL conical, 4 x 85 mL (Swing)

24 x 15ml (Fixed angle)

Time control < 100 min, pulse, continuous

ACC/DEC ramps 5/6 steps

Program memory 10

Noise level < 60 dB

Imbalance cutoff Yes

Rotor identification Manual

Dimension (W x D x H, mm) 448.5 x 531 x 286

Weight without rotor 25 kg

Power requirement (VA) 500 VA

Power input (V, Hz) 210~240 V, 50/60 Hz (110V optional)

Cat. No. FL-4

2. Product description

2.3 Technical Specifications

3. Installation

3.1 Packing Inspection

•Check packing conditions carefully, before unpacking.

•Contact Hanil Scientific Inc. immediately if damages found.

•Check the delivery for completeness.

•You can get contact details on packing boxes and the back of the manual.

3.2 Installation

3.2.1 Selecting the location

Installation on hard and flat ground.

• Centrifuge should be installed on hard and flat place.

• If the centrifuge is installed in an inclined place, the shaft may be bent due to the

weight of the rotor.

Goodventailation.

• For air circulation and safety, maintain a 30cm“clearance envelope”around the

centrifuge while the rotor is spinning.

Constant temperature/humidity

• Centrifuge equipped with the sensitive electronic software which is fragile with

humidity and temperature.

•Must avoid direct ray or heater and be put in the ambience of controlled temp.and air.

Avoid the corrosive gas

• Install the centrifuge in a place where corrosive gas is not generated.

• Sulfur dioxide gas and chlorine gas may cause corrosion.

Leveling

• The shaft should be put exactly vertical on the hotizontaliy flat ground by

the leveling tool

7 l www.ihanil.com

3. Installation

3.3 Power Connection

•Connect the device to voltage sources, which correspond to the electrical

requirements on the label attached to the device.

•Check the wall outlet is earth-grounded, surge-protected and can supply

enough power.

1. Connect the DC plug at the power socket on the right side of the device.

2. Plug the AC plug into the outlet.

3. Turn on the power switch

A/S : +82-2-3452-8966 / techsupp[email protected] 8

4. Operation

4.1 Operation Panel

Button Description

Setup / Enter Set the Values

Start/Stop/Short Start/Stop the centrifugation

Press more than 2sec. : short spin

9 www.ihanil.com

UP / Down Up or down the values

Move(Left/Right) Select a parameter

Lid Lid open

Program Press once: Saving a program (Up to 10)

Press twice: Calling up a program

Autres manuels pour FLETA 4

Table des matières

Autres manuels Hanil Équipement de laboratoire

Hanil

Hanil M 13 Manuel utilisateur

Hanil

Hanil FLETA 40P Manuel utilisateur

Hanil

Hanil T04 Manuel utilisateur

Hanil

Hanil M15S Manuel utilisateur

Hanil

Hanil Supra R30 Manuel utilisateur

Hanil

Hanil HyperVAC HVC-2124 Manuel utilisateur

Hanil

Hanil Fleta 5 Manuel utilisateur

Hanil

Hanil SeroSpin II Manuel utilisateur

Hanil

Hanil J1250 Manuel utilisateur

Hanil

Hanil FLETA 4 Manuel utilisateur

Hanil

Hanil Component wR Manuel utilisateur

Hanil

Hanil Ultra 5.0 Manuel utilisateur

Hanil

Hanil Cellspin II Manuel utilisateur

Hanil

Hanil M15R Manuel utilisateur

Hanil

Hanil ARA Smart 6 Manuel utilisateur

Hanil

Hanil T05R Manuel utilisateur

Hanil

Hanil Fleta 5 Manuel utilisateur

Hanil

Hanil T05R Manuel utilisateur

Hanil

Hanil J1250 Manuel utilisateur

Hanil

Hanil Fleta5 Manuel utilisateur

Hanil

Hanil Smart 15 Plus Manuel utilisateur

Hanil

Hanil Component R6 Manuel utilisateur

Hanil

Hanil T04B Manuel utilisateur

Hanil

Hanil Smart 13 Manuel utilisateur

Manuels Équipement de laboratoire populaires d'autres marques

Qiagen

Qiagen DML 3000 Manuel utilisateur

Queensgate

Queensgate NANOSCAN OP400 Manuel de programmation

Conviron

Conviron GEN1000-GE Manuel utilisateur

Parr Instrument

Parr Instrument 4560 Mode d’emploi

IKA

IKA IC control Manuel utilisateur

Integra

Integra DOSE IT Manuel utilisateur

Agilent Technologies

Agilent Technologies 5800 ICP-OES Manuel utilisateur

Endress+Hauser

Endress+Hauser Cleanfit CPA875 Manuel utilisateur

NI PXI-5422 Manuel

Collomix

Collomix Aqix Manuel utilisateur

SPEX SamplePrep

SPEX SamplePrep 6875 Freezer/Mill Series Manuel utilisateur

Ocean Insight

Ocean Insight FLAME-NIR+ Manuel utilisateur

Parker

Parker ALIGN-MG-NA Manuel utilisateur

BD 644787 Manuel utilisateur

DENTAURUM

DENTAURUM Compact Megaplus Manuel utilisateur

Biuged Laboratory Instruments

Biuged Laboratory Instruments BGD 626 Manuel utilisateur

VWR

VWR SAS Super IAQ Manuel utilisateur

illumina

illumina MiSeqDx Manuel utilisateur