Hamilton Beach DURATHON Manuel utilisateur

Extra-Large Electronic

DurathonTM Iron

English ...................... 2

READ BEFORE USE

Visit www.hamiltonbeach.in for

our complete line of products and

Use and Care Guides – as well as

delicious recipes and tips!

Questions?

Please call us for Express

Service – our friendly

associates are ready to help.

1.800.42.555.43

IMPORTANT SAFETY INSTRUCTIONS

1. Read all instructions.

2. This appliance is not intended for use by persons (including

children) with reduced physical, sensory, or mental capabilities,

or lack of experience and knowledge, unless they are closely

supervised and instructed concerning use of the appliance by a

person responsible for their safety.

3. Close supervision is necessary when any appliance is used by

or near children. Children should be supervised to ensure that

they do not play with the appliance.

4. Do not leave iron unattended while the iron is connected or on

an ironing board.

5. Only use an iron for its intended use.

6. To avoid the risk of electric shock, do not immerse the iron

in water or other liquids.

7. Always turn the iron to OFF (O) before plugging or unplugging

the iron from the electrical outlet. Never pull on the cord to

disconnect the iron from the electrical outlet; instead, grasp

the plug and pull on the plug to disconnect the iron.

8. Do not let the cord touch hot surfaces. Let the iron cool

completely before putting the iron away. Coil the cord

loosely around the iron for storing.

9. Always disconnect the iron from the electrical outlet before

filling the iron with water, emptying the water from the iron,

and when the iron is not in use.

10. Do not operate the iron with a damaged cord or in the event

the iron has been dropped or damaged or there are visible

signs of damage or it is leaking. To avoid the risk of electric

shock, do not disassemble the iron. Take it to a qualified

serviceman for examination and repair. Incorrect assembly

might result in a risk of electric shock when the iron is used

after reassembly.

11. The iron must be used and rested on a stable surface.

12. When placing the iron on its stand, ensure that the surface

on which the stand is placed is stable.

13. Burns can occur from touching hot metal parts, hot water, or

steam. Use caution when you turn a steam iron upside down—

there might be hot water in the reservoir.

14. To avoid a circuit overload, do not operate an iron on the same

circuit with another high-wattage appliance.

15. If an extension cord is absolutely necessary, a cord with an

ampere rating equal to or greater than the maximum rating

of the iron shall be used. A cord rated for less amperage can

result in a risk of fire or electric shock due to overheating. Care

shall be taken to arrange the cord so that it cannot be pulled or

be tripped over.

When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock,

and/or injury to persons, including the following:

SAVE THESE INSTRUCTIONS!

Other Consumer Safety Information

This appliance is intended for household use only.

• Use the iron on an ironing board. Ironing on any other surface

may damage that surface.

• Do not iron or vertical-steam clothes that are being worn.

• Do not use vertical steam in the direction of people or pets.

• During first use of the iron, it may appear to smoke. This will stop

and does not indicate a defect or hazard.

• Many irons spit or sputter during the first few uses with tap water.

This happens as the steam chamber becomes conditioned. This

will stop after a few uses.

• To clean steam vents before first use, prepare iron for steam ironing

and then iron over an old cloth for a few minutes while letting the

iron steam. Press the Steam Burst button several times to clean the

vents. Then follow the self-cleaning instructions on page 11.

Parts and Features

Heel Rest

Water Tank

Cover

Cord

Self-Clean

Button

Durathon™ Nonstick Soleplate

Spray

Nozzle

Spray and Steam

Burst Buttons

Adjustable

Steam Switch

Temperature Settings/

Auto Shutoff Indicator

Temperature

Settings Button

Soft Touch Grip

How to Dry Iron

1234

Press Temperature Settings Button

to select desired temperature.

Allow 2 minutes for iron to reach

maximum temperature. The light

will blink while preheating.

To turn iron off, press

Temperature Settings Button

until OFF is illuminated. The light

will stay on until iron is unplugged.

IRON POSITION

Resting on soleplate

Resting on either side

Resting on heel

POSITION SENSING/AUTO SHUTOFF

The iron will turn off automatically when left in the following positions.

The Auto Shutoff time varies based on the iron’s position.

MOTIONLESS TIME

30 seconds

15 minutes

NOTE: Moving the iron will reset the Auto Shutoff sensor.

Set the Adjustable Steam Switch

to (Dry Iron).

How to Steam Iron

Set the Adjustable Steam Switch

to (Dry Iron).

Press Temperature Settings

Button to select desired fabric

setting in the steam range. Allow

2 minutes for iron to reach

maximum temperature. The light

will blink while preheating.

wWARNING Burn Hazard:

Attempting to steam iron on

a lower temperature setting or

failing to allow the iron to preheat

for 2 minutes can result in hot

water dripping from the soleplate.

Set Adjustable Steam Switch to

the desired steam level.

6 6

For vertical steaming, hold iron 6 inches (15 cm) from garment and do

not allow hot soleplate to touch delicate garments. Press and release

the Steam Burst Button to steam out wrinkles. Wait at least 5 seconds

before pressing Steam Burst Button again.

How to Steam Iron (cont.)

To turn iron off, set Adjustable

Steam Switch to (Dry Iron).

7 8

Press Temperature Settings

Button until OFF is illuminated.

The light will stay on until iron is

unplugged.

IRON POSITION

Resting on soleplate

Resting on either side

Resting on heel

POSITION SENSING/AUTO SHUTOFF

The iron will turn off automatically when left in the following positions.

The Auto Shutoff time varies based on the iron’s position.

MOTIONLESS TIME

30 seconds

15 minutes

NOTE: Moving the iron will reset the Auto Shutoff sensor.

Fabric Setting Chart

NOTICE: To avoid garment damage, check garment label for

fabric composition and ironing instructions.

Garment Label Symbols

Fabric care labels on garments have symbols that show ironing

instructions and recommended temperature settings. These symbols

are shown below along with an explanation of their meaning.

Temperature

Setting

OFF

Synthetics

Silk, Wool

Cotton, Linen

Steam

Setting

Dry

Iron

Steam

Range

Ironing

Instructions

OFF

Dry iron using spray

if necessary.

Iron silk on wrong

side.

For cotton, iron

while still damp or

use spray.

For linen, iron fabric

on wrong side.

•

Low

••

Medium

•••

High

Iron High

Temp

Setting

Medium

Temp

Setting

Low Temp

Setting

Do not iron Do not use

steam

Tips for Best Ironing Results

PREPARE TO IRON:

1. Cover your ironing board with a padded, heat-resistant cover. Brush or wipe off any dust, dirt, or debris so it doesn’t end up on your clothes.

2. To set the height of the ironing board, stand with your elbows bent at right angles; then drop your hands slightly so that your arms are in a

comfortable position. Set the height of your ironing board to this height.

3. Check the soleplate (the surface of the iron that meets the fabric) for mineral deposits or scorched material before you begin ironing. If these

deposits or minerals are left on the soleplate, they may end up on your clothes. Unsure? Test-glide the iron on a rag or old towel first.

TEST KITCHEN TIP: To clean an iron’s soleplate, preheat the iron to the highest temperature setting and iron over a damp, 100% cotton cloth.

This creates heavy steam that transfers grime from the soleplate to the cloth. Many irons have a Self-Clean Button. This will clean the steam

holes, but it will not remove grime from the flat surface of the soleplate. NOTE: Care should be used while cleaning; steam can burn.

FAST FACTS:

• Don’t iron in a circular motion as this can stretch fabric. Instead, iron lengthwise.

• Natural fibers such as cotton and linen should be ironed slightly damp for faster, easier ironing. If they are completely dry, use maximum

steam while ironing or mist them with water prior to ironing.

• Any portion of a garment that has 2 layers of fabric such as pockets, seams, collars, and cuffs should be ironed inside out first.

• To press a collar, iron from the points in using small strokes of the iron. After wrinkles are pressed out, crease the collar into place by hand—

not with the iron. Treat French cuffs similarly, gently creasing by hand after ironing.

IRONING VERSUS PRESSING:

• You may have heard the terms “ironing” and “pressing” used interchangeably, but they are actually quite different. When ironing, you slide the

iron back and forth over fabric. When pressing, the iron is placed and held on the fabric in one spot, lifted up, and this process is repeated until

the areas that need attention are smooth. A “pressing” technique is helpful to avoid stretching fabrics.

• A pressing cloth can help reduce unwanted “shine” on fabrics. You can purchase a pressing cloth in the laundry care section, or a clean white

dishtowel or 100% cotton pillowcase works equally well. You do not need to increase the recommended iron temperature when using a

pressing cloth.

FABRIC FACTS AND LABELS:

Every fabric is different and should be treated accordingly. The label inside clothing or linens should recommend fabric care instructions that

include ironing treatment. As a general rule, these instructions should be followed. If the fabric is a blend, use a low temperature setting. If you

do not know what the content of the fabric is, use the lowest temperature first and test on an inside seam.

Care and Cleaning

Allow iron to cool.

To clean an iron’s soleplate, preheat the iron to the highest

temperature setting and iron over a damp, 100% cotton cloth.

This creates heavy steam that transfers grime from the soleplate

to the cloth. Many irons have a Self-Clean Button. This will clean

the steam holes, but it will not remove grime from the flat surface

of the soleplate.

NOTE: Care should be used while cleaning; steam can burn.

NOTICE: To avoid damage to the iron soleplate:

• Never iron over zippers, buttons, pins, metal rivets, or

snaps, since they may scratch the soleplate surface.

• Allow the iron to cool and wipe with a soapy, soft damp

cloth to clean occasional buildup on the soleplate. Never

use abrasive cleaners or metal scouring pads, since they

may scratch the surface.

Do not store iron laying flat on

soleplate.

To empty water from iron, open

the water tank cover and slowly

tilt pointed end of iron over sink

until water runs out.

Soleplate Care

Autres manuels pour DURATHON

Table des matières

Autres manuels Hamilton Beach Fer

Hamilton Beach

Hamilton Beach 14600 Manuel de programmation

Hamilton Beach

Hamilton Beach 14210 Manuel du propriétaire

Hamilton Beach

Hamilton Beach 14880C Manuel utilisateur

Hamilton Beach

Hamilton Beach 840154800 Manuel utilisateur

Hamilton Beach

Hamilton Beach 14431 - Smart Grip Iron Manuel du propriétaire

Hamilton Beach

Hamilton Beach 840121300 Manuel utilisateur

Hamilton Beach

Hamilton Beach 840087000 Manuel utilisateur

Hamilton Beach

Hamilton Beach 14963 Manuel utilisateur

Hamilton Beach

Hamilton Beach 17130 Manuel utilisateur

Hamilton Beach

Hamilton Beach 14X60 - Expression Ergonomic Handle Iron Manuel utilisateur

Hamilton Beach

Hamilton Beach 14017 Manuel du propriétaire

Hamilton Beach

Hamilton Beach 14289 Manuel utilisateur

Hamilton Beach

Hamilton Beach 14551 Manuel du propriétaire

Hamilton Beach

Hamilton Beach 840127400 Manuel utilisateur

Hamilton Beach

Hamilton Beach 14751 Manuel du propriétaire

Hamilton Beach

Hamilton Beach 14413 - Easy Touch Non-Stick Iron Manuel du propriétaire

Hamilton Beach

Hamilton Beach Durathon 19901 Manuel du propriétaire

Hamilton Beach

Hamilton Beach 19031 Manuel utilisateur

Hamilton Beach

Hamilton Beach 10092 Manuel du propriétaire

Hamilton Beach

Hamilton Beach Easy-Touch 14417 Feuille d'instructions

Hamilton Beach

Hamilton Beach 14690 Manuel du propriétaire

Hamilton Beach

Hamilton Beach Steam Elite 14011 Feuille d'instructions

Hamilton Beach

Hamilton Beach 14710 Manuel du propriétaire

Hamilton Beach

Hamilton Beach 14975 - Professional Iron Manuel utilisateur

Manuels Fer populaires d'autres marques

Clatronic

Clatronic DB 3703 Manuel utilisateur

TEFAL

TEFAL FV4093Z0 Manuel utilisateur

Gorenje

Gorenje SIH 2200 BS Manuel utilisateur

Philips

Philips GC6012 Manuel utilisateur

Bosch

Bosch 2 Series Manuel utilisateur

Riffel

Riffel Catena KB-819 Manuel utilisateur

Texi

Texi Hestia Manuel utilisateur

Maxwell

Maxwell MW-3010 Manuel utilisateur

TREVIDEA

TREVIDEA Girmi ST60 Manuel utilisateur

Philips

Philips HI5914/30 Manuel utilisateur

Primula

Primula Vapormat Manuel utilisateur

Magio

Magio MG-541 Manuel utilisateur

Scarlett

Scarlett SC-1334S Manuel utilisateur

Bosch

Bosch Sensixx B22L Manuel utilisateur

Philips

Philips GC651 Manuel utilisateur

Vitek

Vitek VT-1247 VT Manuel utilisateur

Cleanmaxx

Cleanmaxx 3397 Manuel utilisateur

Philips

Philips GC800 Manuel utilisateur