Hama MyVoice1000 Manuel utilisateur

137410

Bluetooth-Headset

Operating Instructions

Bedienungsanleitung

Mode d‘emploi

Instrucciones de uso

Instrukcja obsługi

“MyVoice1000”

Controls and Displays

1. Multi-Function Key

2. Charging Socket

3. Status LED

4. Microphone

Thank you for choosing a Hama product.

Take your time and read the following instructions and information

completely. Please keep these instructions in a safe place for

future reference. If you sell the device, please pass these operating

instructions on to the new owner.

1. Explanation of Warning Symbols and Notes

Warning

This symbol is used to indicate safety instructions or to draw your

attention to specic hazardås and risks.

Note

This symbol is used to indicate additional information or

important notes.

2. Package Contents

•1x MyVoice1000 Bluetooth headset

•1x USB charging Cable (B)

•1x Ear Hook (C)

•These operating instructions

GOperating instruction

3. Safety Notes

•The product is intended for private, non-commercial use only.

•Protect the product from dirt, moisture and overheating, and only

use it in a dry environment.

•Do not allow yourself to be distracted by the product, for example

when driving a vehicle or operating sports equipment. Always pay

attention to the surrounding trac and your environment.

•Do not drop the product and do not expose it to any major

shocks.

•Do not operate the product outside the power limits given in the

specications.

•Do not open the device or continue to operate it if it becomes

damaged.

•Since the battery is integrated and cannot be removed, you will

need to dispose of the product as a whole. Do this in compliance

with the legal requirements.

•Dispose of packaging material immediately according to locally

applicable regulation.

•Do not modify the product in any way. Doing so voids the

warranty.

Warning – Rechargeable battery

•Only use suitable charging devices or USB connections for

charging.

•As a rule, do not charge devices or USB connections that are

defective and do not try to repair them yourself.

•Do not overcharge the product or allow the battery to

completely discharge.

•Avoid storing, charging or using batteries in extreme

temperatures.

•We suggest to fully charge the item for at least one time in

two months

4. Getting Started

•The headset is equipped with a rechargeable battery. The battery

must be fully charged before using the device for the rst time.

•Ensure that the headset is switched off before charging it.

•Begin charging by connecting the included USB charging cable

to the charging socket (2) as well as to the USB connection

of a PC/laptop.

•Alternatively, you can charge the headset using a suitable USB

charger. Please refer to the operating instructions for the USB

charger used.

•The status LED (3) lights up constantly in red during the charging

process.

•Charging the battery fully may take up to 3 hours.

Warning

Do not use the headset while it is charging.

•If the battery is fully charged, the status LED (3) will go out.

•Disconnect all cable and mains connections after use.

Note

If you have not used the item for a few month, it may take 15-30

minutes for the status LED (3) to red when charging.

5. Operation

Switching the headset on/off

•Turn On:

With the device off, press and hold the multi-function key (1)

for 5 seconds until you hear a short tone. The status LED (3)

ashes in blue three times

•Turn Off:

With the device on, press and hold the multi-function key (1)

for 2 seconds until you hear a long tone. The status LED (3) will

light up in red briey before the device turns off.

The rst time the device is turned on, pairing is automatically started

– see 5.1 Bluetooth pairing.

5.1. Bluetooth pairing

Note – Pairing

•Make sure that your Bluetooth-capable terminal device is on

and Bluetooth is activated.

•For more information, please refer to the operating

instructions of your terminal device.

•The headset and the terminal device should not be any further

than 1 metre away from each other. The smaller the distance,

the better.

•Ensure the headset is off.

•Press and hold the multifunction button (1) for approx. 5

seconds until the status LED (3) begins to alternate red and blue.

The headset is searching for a Bluetooth connection.

•Open the Bluetooth settings on your terminal device and wait until

MyVoice1000 appears in the list of Bluetooth devices found.

•Bluetooth devices found.

•Select MyVoice1000 and wait until the headset is listed as

connected in the Bluetooth settings on your terminal device.

Note – Bluetooth password

If your terminal device requests a password to establish the

connection, enter 0000.

Note

If pairing was successful, the status LED (3) quickly ashes blue

ve times. You will hear a long tone.

•You can now use the headset.

5.2. Automatic Bluetooth connection

(after successful pairing)

Note

•Make sure that your Bluetooth-capable terminal device is on

and Bluetooth is activated.

•For more information, please refer to the operating

instructions of your terminal device.

•Make sure that the headset is switched on.

•After the headset and terminal device have been paired, a

connection is established automatically.

•You can now use the headset.

Note

•If pairing was successful, the status LED (3) ashes blue 5

times. You hear a long tone.

•It may be necessary to change the settings on your terminal

device to enable it to automatically connect to the paired

headset.

Hinweis - Connection impaired

After the headset and terminal device have been paired,

a connection is established automatically. If the Bluetooth

connection is not established automatically, check the following:

•Check the Bluetooth settings of your terminal device to see

whether MyVoice1000 is connected. If not, repeat the steps

listed under 5.1 Bluetooth pairing.

•Check whether obstacles are impairing the range. If so, move

the devices closer together.

•The performance can also be affected by a weak battery.

5.3. Hands-free function

Note

•Note that support for certain key functions may vary

depending on your terminal device.

•For more information, please refer to the operating

instructions of your terminal device.

Making a call

•Dial the number directly on your terminal device to make a call.

Voice-activated dialing

•Please check if your mobile phone supports voice dialing function.

•Press the multi-function key (1) briey, then you can hear a

short beep.

•The mobile phone’s voice control will be activated.

•Start a call as described in your mobile phone’s operating

instructions.

•Say the name of person you wish to call.

•If the voice tags are paired to the related phone number stored in

your mobile phone, the number will be dialed.

Accepting calls

•Press the multifunction button (1) once to answer an incoming

call.

Ending a call

•During a call, press the multifunction button (1) once to end

the call.

Redial

•Briey press the multifunction button (1) twice to call the

last number.

•You will hear a short beep.

Mute function

•Press and hold the multifunction button (1) for approx. 1

second during a call to turn off the microphone (4). The call will

be put on hold, but your conversation partner will not be able

to hear you.

•There will be a long tone.

•Press the multifunction button (1) again to un-mute the

microphone. There will be a long tone.

5.4. Disconnecting the headset

•Switch the headset off.

•Disconnect the headset via the Bluetooth settings on your

terminal device.

Autres manuels pour MyVoice1000

Table des matières

Langues :

Autres manuels Hama casque

Hama

Hama Basic 106690 Manuel utilisateur

Hama

Hama BT700 Manuel utilisateur

Hama

Hama 00184071 Manuel utilisateur

Hama

Hama 00137423 "MyVoice3000" Manuel utilisateur

Hama

Hama 00178881 Manuel utilisateur

Hama

Hama BSH-150 Manuel utilisateur

Hama

Hama MyVoice2100 Manuel utilisateur

Hama

Hama HA-2710 Manuel utilisateur

Hama

Hama BSH-220 Manuel utilisateur

Hama

Hama MyVoice 1100 Manuel utilisateur

Hama

Hama BSH-220 Manuel utilisateur

Hama

Hama MyVoice1000 Manuel utilisateur

Hama

Hama Triton Manuel utilisateur

Hama

Hama Tattoo Manuel utilisateur

Hama

Hama BHM-110 Manuel utilisateur

Hama

Hama 00177094 BTH Run Manuel utilisateur

Hama

Hama Pure Series Manuel utilisateur

Hama

Hama BSH-155 Manuel utilisateur

Hama

Hama BSH-240 Manuel utilisateur

Hama

Hama BTH-170 Manuel utilisateur

Hama

Hama BSH-180 Manuel utilisateur

Hama

Hama Kooky 00184139 Manuel utilisateur

Hama

Hama MyVoice 1300 Manuel utilisateur

Hama

Hama MyVoice700 Manuel utilisateur

Manuels casque populaires d'autres marques

Sena

Sena SMH10 Manuel utilisateur

IASUS

IASUS Stealth IA-NT4-BASIC-BT Manuel utilisateur

Sennheiser

Sennheiser EPOS ADAPT 230 Manuel utilisateur

Doro

Doro Flexus HS2005 Manuel utilisateur

GE 98971 Manuel utilisateur

Plantronics

Plantronics Blackwire 3200 Series Manuel utilisateur

Blue Tiger

Blue Tiger Advantage PLUS Manuel utilisateur

Jawbone

Jawbone Icon Manuel utilisateur

Jabra

Jabra FR 20 Manuel utilisateur

Roxcore

Roxcore Flow A+ Manuel utilisateur

Turtle Beach

Turtle Beach XP 510 Manuel utilisateur

Philips

Philips SHB6101 Manuel utilisateur

Jabra

Jabra PRO 9460 Duo Manuel utilisateur

HyperX

HyperX HyperX Cloud Flight Manuel utilisateur

Bose

Bose MIE2 Mobile Manuel utilisateur

Jabra

Jabra Steel Manuel utilisateur

HyperX

HyperX cloud ii Manuel utilisateur

Southwing

Southwing SA505 Manuel utilisateur