Haloview CA112 Manuel utilisateur

Contents

1. 1Product Overview

2. Pair Button

3. Installation

CA112 Camera

4. CA116 Installation

CA115 Camera

CA116 Camera

CA116 Installation without drilling holes

5. Connecting the Camera

6. Connecting the Trafﬁc Light

7. Camera Speciﬁcation

PRODUCT OVERVIEW

PAIR BUTTON

INSTALLATION

CA112 Camera

Ca112 Left Side/Right Side Camera Package Contents:

1. Manual

2. 3dBi 2.4G Antennas x 2PCS

3. 410 self-tapping self-drilling screws M4.2*19mm (10PCS)

4. Terminal Cap x 8PCS

Fig.1 Fig.2

Figure1/Figure2 Remove Marker Light From vehicle

-1-

Figure3: Unscrew the LED Marker Light

Figure4: Remove the marker light and pull out the cables

Fig.3 Fig.4

Fig.5 Fig.6

Figure5: Cutting the cables by a plier

Figure6：Stripping the cables to expose the conductive core

Fig.7 Fig.8

Fig.9 Fig.10

Figure7/Figure8/Figure9: Ensure correct polarity when wiring the cables.

Red + Black -

-2-

Figure10/Figure11: Wire connections and terminals must be sealed

and waterproof.

Fig.17 Fig.18

Figure12/Figure13/Figure14/Figure15:

Clamp the terminal tightly to make sure they are sealed and waterproof.

Fig.11 Fig.12

Fig.13 Fig.14

Fig.15 Fig.16

Figure16：Put the wires and terminals into hole and align the camera

to screw holes.

-3-

Figure17/Figure18: Remove the LED cover by straight screwdriver

Figure19: Secure the LED base on the vehicle wall using the four

self-tapping screws.

Figure20/Figure21: Replace the LED cover. Installation done.

Fig.19 Fig.20

Fig.21

CA115 Camera

1. Manual

2. 3dBi 2.4G Antenna x 1PC

3. PB Stainless steel ﬂat tail screws M2.6*8mm (5PCS)

4. PA Stainless steel Philip's head screw M4*18 (6PCS)

5. Terminal Cap x 4PCS

Fig.1 Fig.2

-4-

Figure1/Figure2/Figure3: Remove Rear Light From vehicle by

straight screwdriver

Figure6: Remove the rear light and pull out the cables

Fig.3 Fig.4

Fig.5 Fig.6

Figure7/Figure8: Cutting the cables by a plier and stripping the cables

to expose the conductive core

Fig.7 Fig.8

Figure9/Figure10/Figure11: Secure the rear light camera base on the

vehicle wall, aligning to the pre-install mounting holes.

Fig.9 Fig.10

-5-

Figure12/Figure13: Secure the base with four provided screws.

Figure6: Remove the rear light and pull out the wires

Fig.11 Fig.12

Figure15/Figure16: Wire connections and terminals must be sealed

and waterproof.

Figure17/Figure18/Figure19: Clamp the terminal tightly to make sure

they are sealed and waterproof.

Fig.13 Fig.14

Fig.15 Fig.16

Fig.17 Fig.18

-6-

Figure17/Figure18/Figure19: Clamp the terminal tightly to make sure

they are sealed and waterproof.

Figure20/Figure21: Put the wires and terminals into hole and fasten

the rear light camera into base.

Figure22/23: Remove the cover of rear light camera and secure the

base with four provided screws.

Figure24/Figure25: Replace the cover. Installation done.

Fig.19 Fig.20

Fig.25

Fig.23 Fig.24

Fig.21 Fig.22

-7-

CA116 Camera

CA116 Rear Camera Package Contents:

1. Manual

2. 3dBi 2.4G Antenna x 1PC

3. 3.5mm to DC power cable x 1PC

4. DC power cable to 2P wires x 1PC

5. PB Stainless steel ﬂat tail screws M3*10mm (5PCS)

6. PA Stainless steel Philip's head screw M4*18 (5PCS)

7. Magnet Mount x 1PC (optional)

8. Torx screw 1PCS (optional)

9. Metal plate with 3M tape x 1PC (optional)

Figure1:

Select a suitable mounting position and drill a center hole on

the vehicle wall.

Figure2:

For prewired trailer and ﬁfthwheel, plug the 3.5mm to DC power cable.

For unprewired trailer and ﬁfthwheel, wire the DC to 2P cable with the

vehicle circuit. Ensure correct polarity when wiring the cables.

Red + Black

Figure3/Figure4: Feed the supplied power cable through gasket.

Ensure the bare end of the cable goes into the vehicle and the ﬂat side

faces inward.

Fig.2Fig.1

Fig.4Fig.3

-8-

CA116 Installation

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Haloview Accessoires automobiles

Haloview

Haloview MC7611 Manuel utilisateur

Manuels Accessoires automobiles populaires d'autres marques

James Baroud

James Baroud Odyssey Manuel utilisateur

Motorola

Motorola i50sx Manuel utilisateur

Yakima

Yakima 9MM STANDARD BIKE MOUNT Manuel utilisateur

Feniex

Feniex T3 Manuel utilisateur

Renault

Renault 77 11 423 180 Manuel utilisateur

Kia

Kia E8300-4D000 Manuel utilisateur

Brink

Brink 756843 Manuel utilisateur

Whispbar

Whispbar K085W Manuel utilisateur

v.link

v.link CI-VL2-PC-HSD Manuel utilisateur

Viking

Viking Stack-Rack Guide de configuration rapide

Aries

Aries 203015 Manuel utilisateur

Choetech

Choetech AT0005 Manuel utilisateur

ZZ2

ZZ2 ZZAIR-PRO Manuel utilisateur

Holman

Holman 4A80L Manuel utilisateur

Thule

Thule 2075 Manuel utilisateur

Motorola

Motorola T325 Manuel utilisateur

TAUBENREUTHER

TAUBENREUTHER 16-3950 Guide d'installation

DV8

DV8 FBJL-02 Manuel utilisateur