Halcro UTSR1 Manuel utilisateur
Owner’s Manual
Universal Touch Screen Remote
UTSR1
Docking Station
Table of Contents
Universal Touch Screen Remote .................... 3-21
Key Features ................................................................. 3
Optional Features.......................................................... 3
Specifications................................................................. 5
Battery Installation and Charging................................ 7
Operating the Remote............................................ 8
Panel Calibration ........................................................... 8
Hot Keys......................................................................... 9
Hard Keys....................................................................... 9
Key Tone ........................................................................ 9
Backlight....................................................................... 10
IR Codes Library.......................................................... 10
Configuration/Setting Up the Unit ............................ 10
Advanced Set-Up.................................................. 13
Edit ................................................................................ 13
Preference ................................................................... 15
Remote Setting ........................................................... 15
Smart ............................................................................ 18
Clone.............................................................................20
PC Link.......................................................................... 21
Interactive Help Screen.............................................. 21
Docking Station............................................... 22-25
Key Features ...............................................................22
Specifications...............................................................22
Quick Charger Function .............................................24
Remote Advanced Editing via Computer ...............24
Maintenance................................................................25
Troubleshooting ..............................................26-27
UTSR1............................................................................26
Docking Station ...........................................................27
Device Code List ............................................ 28-39
Preamp.........................................................................28
Surround Sound Processor.......................................28
TV ..................................................................................28
SAT/CBL.......................................................................34
CD .................................................................................37
DVD ...............................................................................38
Service & Warranty ........................................ 40-42
Service Information.....................................................40
Warranty Information.................................................. 41
Warranty Registration Form ......................................42
3
Your Halcro Logic UTSR1 integrates your homes
Infrared remote controls, to deliver instant audiovisual
action.
Key Features
Pre-Programmed with learning capability
9-in-1 remote (replace HALCRO dm 8/10, HALCRO
Processor, CD, TV, SAT TV, CBL TV, DVD, AUX 1 &
AUX 2)
Learn up to 240 commands
EL backlit touch screen panel with intelligent light
sensor for power saving
5 useful hard keys for direct access ( , CH+, CH-,
VOL+, VOL-)
3 touch screen shortcuts ( ,,)
Set up by code entering, device brand name
search and library code search
10 programmable smarts, each with 32 steps in
maximum
Device name and function keys editing, moving,
deleting and restoring
Custom page for personal set up and frequently
used commands
Remote-to-remote copy function
Volume ‘punch through’ control for TV, HALCRO
Pre-amplifier and HALCRO Processor
Interactive help screen
Security password lock
Real time clock
Battery level indicator
Auto power off
AC/DC power charger
Optional Features
Docking charger for quick battery charging
Computer link (PC link) for special key layout and
function via USB connection to PC
Perform PC software upload and download
Remote Control
1. Infra-red Lens 6. Touch Screen Panel
2. Green LED Indicator 7. Short Cut Keys
3. Battery Level Meter 8. Hard Keys
4. Current Time 9. Connection Jack
5. Current Mode 10. Battery Compartment
5
Specifications
Operation System: Integrated preprogrammed
and learning infra-red
remote control system
Compatibility: Preprogrammed with code
library of HALCRO dm 8/10
(Preamplifier), HALCRO
Processor, Compact Disc
Players (CDs), Televisions
(TVs), Satellite/Digital
Satellite Receivers (SAT
TVs), Cable Converters
(CBL TVs) and Digital Video
Disc Players (DVDs)
Memory Capacity: 240 learning commands
Memory retention after battery disconnection:
Non-volatile and permanent
memory
Display Panel: Monochrome touch screen
LCD
Resolution: 320 x 80 pixels
EL Backlighting: Blue-Green EL backlighting
with light sensor
Operating Distance: 8 Meters (25 feet)
Power Requirement: 4 x AAA size NiMH
rechargeable batteries
Charging Time: Approximately 17 hours
Dimensions: 220 x 51 x 25 mm
Weight: 165g (without batteries),
215g (with batteries)
Included Accessories: AC/DC power adaptor
(DC9V, 400mA, 3.6VA) x 1,
Connector x 1 (for charging
purpose), 4 x AAA size
NiMH rechargeable
batteries
Optional Accessories: Halcro Logic Docking
Station – Quick charger, PC
Link software for MS
Windows 98SE, Windows
2000, Windows NT,
Windows XP and USB Cable
Remote Control
Note: Both the Halcro Logic Remote Control and
Docking Station comply with limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection
against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instruction, may cause harmful
interference to radio communications. However, this
is no guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to
radio or television reception, which can be determined
by turning the equipment off and on, the user is
encouraged to try to correct the interference by one
or more of the following measures:
Reorient or relocate the receiving antenna
Increase the separation between the equipment
and receiver
Connect the equipment into an outlet on a circuit
different from that to which the receiver is
connected
Consult the dealer or an experienced radio/TV
technician for help
Modifications not authorized by the manufacturer
may void users authority to operate this device
7
Battery Installation and Charging
Your Halcro Logic UTSR1 is supplied with 4 x AAA
NiMH rechargeable batteries, a connector and a
charging adaptor. We recommend you charge your
batteries over night (10 hours) before 1st time use.
The battery meter (top-left corner of LCD) will
empty to indicate when the batteries require
recharging.
To install the batteries, open the battery cover; follow
the polarity symbol shown in battery compartment,
place the batteries inside and then replace the cover.
To recharge batteries, put the power adaptor into AC
wall outlet, insert the DC jack to the connector, then
connect to the socket at the bottom of the remote. It
takes approximately 14 to 16 hours to fully charge the
batteries.
Note: The Battery icon is not shown when in
Menu mode.
The unit is designed for optimum operation with
original batteries.
Do NOT connect charging adaptor and connector
when using the non-original batteries.
To avoid data loss, Do NOT attempt remote setup
when batteries are weak.
Remote Control
Operating the Remote
After inserting the batteries, you will be prompted by
the main page, which shows all the devices and
functions for selection.
Tap HOME at any time to jump to this page. If
remote is inactive for approximately 60 seconds, it
will go to sleep mode and shut down the display.
Simply touch the screen panel to activate the unit.
(Note: When in sleep mode, the hard key section is
still available for command)
Tap any device icon on screen to enter
corresponding device mode. The LCD shows a
remote key platform
Tap a key directly to send out corresponding infra-
red command
Tap PAGE at bottom of screen to change
command pages
Tap HOME to return to main page
There will be no label or symbol for an empty key
(Note: these keys are available for learning, please
refer to learning section of this manual for details.)
Tap MENU to set up the unit
Panel Calibration
Please follow the below instruction for calibration of
the Halcro Logic UTSR1. If you experience any
incorrect response from the touch screen, please re-
calibrate the unit.
Tap MENU to set up the unit
Tap REMOTE SETTING
Tap CALIBRATION
Follow the described procedure from the screen
display
Tap BACK to go back to the HOME page
9
Note: If your Halcro Logic UTSR1 does not respond,
you can reset the remote by pressing the RESET key
inside the battery compartment (see illustration). This
product may need to be manually reset under high
electrostatic discharge.
Hot Keys
There are 3 Hot keys on the bottom of LCD display,
HOME Jump to main page
MENU Access main setup menu for
configuration/setting
MUTE Volume mute function
Hard Keys
There are 5 hard keys that transmit IR command
corresponding to device selected.
Power ON/OFF
CH+ Program up or Channel up
CH- Program down or Channel down
VOL+ Volume up
VOL- Volume down
Key Tone
When you tap any key, there is a short audible beep.
User can enable/disable this function from main menu
setting (for details, please refer to Remote Setting
section in this manual.)
Remote Control
Backlight
There are two separate EL backlights for LCD screen
and hard keys, and will be turned ON separately.
Backlight will be turned ON for 5 seconds (factory
default setting) after a key is pressed, and user can
disable this function. (For details, please refer to
Remote Setting section in this manual.)
IR Codes Library
To setup a code, tap MENU once then select a
device to setup, choose a setup method. User can
setup by learning key command from an original
remote control, entering a code number, browsing
through brand name list, or searching through the
whole library. Refer to separate Code List for IR code
number of different device.
Configuration/Setting Up the Unit
Tap Menu, then choose any one of the following
items:
Setup – setup the pre-programmed code or learn key
command.
Tap SETUP from main menu
Select one of following setup methods
Learning – learn or copy a key command from an
original remote control to Halcro Logic UTSR1
Tap Learning from Setup menu
Select a device where you would like to carry the
command keys (e.g. TV)
Tap a key to be learnt from the Halcro Logic UTSR1
Aim an original remote to the front of Halcro Logic
UTSR1. Press and hold the key until Halcro Logic
UTSR1 responds with a successful message
(approx. 5 seconds)
Edit the keyname or just tap OK to confirm
Tap another key to continue learning of the rest of
the useful commands
Tap MENU to return to main menu, or tap
HOME to return to main page
Autres manuels pour UTSR1
1
Table des matières
Autres manuels Halcro Télécommande
Manuels Télécommande populaires d'autres marques
Panasonic
Panasonic EUR7622KB0 Manuel utilisateur
Bang & Olufsen
Bang & Olufsen Beo4 Manuel utilisateur
Sunwave Tech.
Sunwave Tech. RemoteComm SRC-7000 Manuel utilisateur
Multiplex
Multiplex PROFI TX 9 Manuel utilisateur
One Remote
One Remote RMB4 Manuel utilisateur
FUTABA
FUTABA 9ZAP - PART2 Manuel utilisateur
