HAKO Scrubmaster B175 R Manuel utilisateur
Scrubmaster B 175 R
(7180.XX)
Service-Handbuch
Service Booklet
Hako GmbH .Technisches Produktmanagement . D-23840 Bad Oldesloe .Updated 03/2019 - Rev.1.03
Vertraulich –nur für den internen Gebrauch .Confidential - For internal use only!
Schulung/Training
Fehlersuche/Troubleshooting
Einstelldaten/Adjustments
Sheet 1
Table of contents
Sheet 2
1 Information 7
2 General information 8
2.1 Settings 11
2.1.1 Control panel 12
2.1.2 Machine control unit 13
2.2 Brief description 14
2.2.1 Switching off suction / waste water tank full 15
2.2.2 Solution tank display 16
2.2.3 Machine home position 17
2.2.4 Seat contact switch (3.6.6.4.) 18
2.3 Diagnostics and communications 20
2.3.1 Prerequisites 20
2.3.2 Diagnostic software on the diagnostic computer 21
2.3.3 Connecting to the diagnostic PC 22
2.3.4 Connection scheme with the diagnostic PC 24
2.3.5 Flashing the software 25
Table of contents
2.4 Configuration menu 26
2.4.1 Entering the configuration menu 26
2.4.2 Time and Date setting menu 29
2.4.3 Configuration setting menu 30
2.4.4 Settings, that can be carried out without code 32
2.4.5 Settings, that can only be carried out with code 33
2.4.6 Resetting the last error and deleting the error memory 34
2.4.7 Deleting the last error on the display panel 35
2.4.8 Deleting error entries 36
3 Technical data 37
4 Maintenance intervals 45
4.1 Hako system maintenance (customer) 46
4.2 Hako system maintenance I 48
4.3 Hako system maintenance II 51
4.4 Hako system maintenance S 52
5 Cleaning programmes (FPV) 53
Sheet 3
Table of contents
6 Machine settings 56
6.1 Basic settings 56
6.1.1 Cleaning units 57
6.1.2 Battery and charger settings 59
6.1.3 Battery setting (LDS) 60
6.1.4 Charger 62
6.1.5 Charger characteristic curves 64
6.1.6 Charging data table of the integrated charger 65
6.1.7 All-wheel drive variant –X-AC 66
6.1.8 SD storage medium in control panel 67
6.2 Customer-specific settings (PPV) 68
7 Mechanical components 71
7.1 Squeegee 71
7.2 Rotating brush heads 77
7.3 Roller brush heads 78
7.4 Lifting element brush head 79
7.4.1 Potentiometer in the lifting element for the brush head 79
Sheet 4
Table of contents
8 Water pump 80
8.1 Water quantities 81
8.2 Water pump standstill detection 82
9 Drive 83
9.1 DMC drive control unit (front) 84
9.1.1 Connection description - drive control unit (front) 84
9.1.2 Service codes - drive control unit (front) 86
9.1.3 Brake - manual release of the brake (front) 92
9.1.4 Brake –testing the brake function 93
9.2 DMC drive control unit (rear) 94
9.2.1 Connection description - drive control unit (rear) 94
9.2.2 Service codes - drive control unit (rear) 96
9.2.3 Brake at the rear axle 101
9.2.4 Steering angle sensor 102
Sheet 5
Table of contents
10 Service messages 106
10.1 Meaning of different switch on displays 111
10.2 Service alarm clock 3.3.1.1 112
11 Battery charger 113
11.1 Operating manual 113
11.2 Programming the charger 117
12 Options 118
13 Notes 123
Sheet 6
1. Information
Sheet 7
Caution:
•During all work at the machine, secure it against unintentional movement.
•Only carry out work at the machine when it has been de-energised (disconnect the
battery plug), except for current and voltage measurements.
•After repairing electrical drives, measure the starting and operating currents to
detect possibly still present errors.
•During all work at the machine, always observe the general safety and accident
prevention regulations of the legislation.
2. General information
Sheet 8
The Scrubmaster B175 R is equipped with a multifunction display on which all
machine statuses are displayed and machine settings can be made.
If a fault occurs, the wrench in the display lights up and the machine beeps. The
current service code (four-digit alphanumerical code in the service indicator) is shown
with flashing dots between the characters.
It is only a current service message if these criteria apply!
2. General information
Sheet 9
Scrubmaster B175 R
The Scrubmaster B175 R is available in working widths of between 85 cm (cylindrical
brush) as well as 90 cm and 108 cm (plate brush).
The machines are delivered from the factory with batteries as standard; here it is
possible to choose between a maintenance-free 36V/280Ah PzV trough battery and a
36V/320Ah PzS trough battery.
Furthermore, it is differentiated between edition machines and configuration machines.
Edition machines are machines that have a clearly defined scope of equipment. In this
context, only a limited scope of additional equipment features is available. Additional
options are not installed in the factory but supplied loose with the delivery for
installation on site at the customer’s.
A separate operating manual, which describes the operating and service statuses of
the charger, is available for the chargers and supplied together with the device. The
charge indicator is shown on the machine display. Service messages of the charger
are also shown on the machine display.
2. General information
Sheet 10
Configuration machines are manufactured order-specifically according to customer
wishes from a pool of available equipment features. Additional options (chemical
dosing, working light, warning signal, etc.) are installed in the factory.
For more details, see the relevant current price lists.
Autres manuels pour Scrubmaster B175 R
2
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels HAKO Scrubber
HAKO
HAKO Hakomatic B 1050 Manuel utilisateur
HAKO
HAKO Hakomatic B45 Manuel utilisateur
HAKO
HAKO Scrubmaster B115 R Manuel utilisateur
HAKO
HAKO Scrubmaster B400 R Manuel utilisateur
HAKO
HAKO Scrubmaster B 120 R Mode d’emploi
HAKO
HAKO Scrubmaster B175 R Manuel utilisateur
HAKO
HAKO Minuteman RoboScrub 20 Manuel utilisateur
HAKO
HAKO 7580.32 Manuel utilisateur
HAKO
HAKO Scrubmaster B30 CL Manuel utilisateur
HAKO
HAKO Hakomatic B45 Manuel utilisateur
HAKO
HAKO Scrubmaster B260 R Manuel utilisateur
HAKO
HAKO Scrubmaster B5 Manuel utilisateur
HAKO
HAKO Scrubmaster B25 Manuel utilisateur
HAKO
HAKO Scrubmaster B75R Manuel utilisateur
HAKO
HAKO PowerBoss Nautilus Manuel utilisateur
HAKO
HAKO Hakomatic B 650 R Manuel utilisateur
HAKO
HAKO Scrubmaster B25 Manuel utilisateur
HAKO
HAKO Scrubmaster B260 R Manuel d'installation et d'exploitation
HAKO
HAKO Scrubmaster B175 R Manuel utilisateur
HAKO
HAKO Scrubmaster B70 CL Manuel utilisateur
