Hakko Electronics FR-410 Manuel utilisateur

Available in:

Desoldering tool with built-in vacuumpump

140 W high power enables perfect desoldering on multi-

layer PWB

New type nozzle can fit onto micro land patterns and

narrow space

Separate nozzle and heater ensure running cost

advantage for you

Desoldering / Rework/Desoldering tool

140 W high powers enable perfect desoldering for the components on multi-layer PWB

Increasing the power to 140 W from 50 W of our previous models (HAKKO 474・475), it can make it easy

to desolder on multi-layer PWB which was never an easy job, and it can also shorten the process time.

A wide selection of nozzle, with the addition of new types, is available for a variety of

desoldering works.

Applicable to even micro lands, components in a narrow space or flat type terminals on the PWB of

downsized devices like mobile phone.

Secure desoldering, valve function that suctions with high pressure

Suction starts 0.2 seconds after pulling the trigger for instance and high pressure suction to achieve

complete desoldering.

Reduction of solder clogging

・Improvement in heating core

Heating ability for backside of heating core is increased to ensure suctioned solder be carried to filter

pipe and avoid solder clogging.

・Featuring ACF (Anti Clogging Function)

ACF (Anti Clogging Function) ensures suctioned solder be carried to filter pipe by keeping the pump

running for a certain period of time (1 to 5 seconds) automatically after releasing trigger.

Improvement in maintainability

・Easy nozzle replacement

The dedicated wrench allows safe, easy and smooth nozzle replacement.

・Easy heater replacement

Easy heater replacement by removing 3 screws on the part of heating core.

・Larger filer and more transparency

Filter size has been increased to protect the pump fromcontaminants, and transparent filter cover allows

quick visual check of the filter condition.

・Tool box

FR-410 comes with a tool box that contains of maintenance tools to keep nozzles and heater in a good

condition.

Featuring a large LCD display

Very easy to see temperature on the large LCD display

Vacuumindicator to check clogging

Autres manuels pour FR-410

3

Table des matières

Autres manuels Hakko Electronics Équipement de test

Hakko Electronics

Hakko Electronics FG-101 Manuel utilisateur

Hakko Electronics

Hakko Electronics FG-460 Manuel utilisateur

Hakko Electronics

Hakko Electronics FG101-16 Manuel utilisateur

Hakko Electronics

Hakko Electronics FG-470 Manuel utilisateur

Hakko Electronics

Hakko Electronics FR-811 Manuel utilisateur

Hakko Electronics

Hakko Electronics 192 Manuel utilisateur

Hakko Electronics

Hakko Electronics FG-465 Manuel utilisateur

Hakko Electronics

Hakko Electronics FG-470 Manuel utilisateur

Hakko Electronics

Hakko Electronics FG101B-03 Manuel utilisateur

Hakko Electronics

Hakko Electronics FG-101B Manuel utilisateur

Manuels Équipement de test populaires d'autres marques

SMART

SMART KANAAD SBT XTREME 3G Series Manuel utilisateur

Agilent Technologies

Agilent Technologies BERT Serial Manuel utilisateur

Agilent Technologies

Agilent Technologies N3280A Manuel utilisateur

Vernier

Vernier Go Direct Voltage Manuel utilisateur

Lifeloc

Lifeloc R.A.D.A.R. Manuel utilisateur

Fluke

Fluke T5-600 Instructions d'utilisation et d'installation

Mercury

Mercury TSL01 Manuel utilisateur

MAHA

MAHA MBT Series Manuel utilisateur

Fuji Electric

Fuji Electric P-61 Manuel utilisateur

ETC

ETC SealerAtor Manuel utilisateur

Skyfine

Skyfine ETHYWAY V2 Manuel utilisateur

Appion

Appion G5 Twin Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 8159-0112A Manuel utilisateur

BW Technologies

BW Technologies MicroDock II Manuel utilisateur

Sun Nuclear

Sun Nuclear 1027 Manuel utilisateur

Biomark

Biomark HPR LITE READER Manuel utilisateur

Hioki

Hioki 3169-20 Manuel utilisateur

Ashcroft

Ashcroft ATE-100 Manuel utilisateur