Haivision Pro460 Manuel utilisateur
Pro460
Quick Start Guide
Parc Edonia, Bat. X1
Rue de la Terre de Feu
35769 Saint Grégoire Cedex
France
Tel: +33 2 56 56 50 14
Document Version: v1.1
3
Front View
Touchscreen
Link Indicator Activity Indicator
Micro SD Card Slot
Intercom mini Jack
(headphone, micro)
USB C port
Power Button
Ethernet 2
Rear View
Ethernet 1
HDMI 1.4 Output
Auto-Start Switch
12G-SDI Output
12G-SDI Input
3G-SDI Inputs
DC IN (18 V nominal)
USB 1 (3.0 Type A)
USB 2 (3.0 Type A)
Genlock input
3
2
1
6 x Micro SIM Card
Slots
4
4
Getting ready
1. Install an external battery onto the unit or connect the AC/DC adapter
to the unit.
Left and right sides
Camera Mounting plate
(Gold Mount, V-mount)
Battery Mounting plate
(Gold Mount, V-mount)
Class 10 recommended
FAT32 or exFAT
2. Insert a micro SD card
11
5
3. Insert SIM cards into slots.
a) Remove the SIM card cover.
c) Place the rear cover back.
b) Insert SIM cards according to indications on
cover.
Micro SIM cards required.
4. Connect the video input cable on SDI 1.
SDI
6
By default, the unit is configured in Single encoding mode
(one video source). The following steps are therefore
written for this mode. For multi encoding mode (multiple
video sources), please refer to the user guide.
Press the power button to turn the unit on.
Turning on the unit
When the unit is ready, the Home screen appears:
7
1. From the Home menu, click on .
2. Click on .
⇒The default source is SDI 1.
Selecting a Video Source
3. Check that video source is SDI 1.
4. If not, click on the Video source Field
and select the needed source.
1. Click on and on to access the
DESTINATION PROFILE CONFIG menu.
⇒By default no profile exists.
2. Click on to create a
Destination Profile.
Configuring a Destination Profile
8
4. Use the keyboard to enter the new Profile
name.
5. Click on .
7. Click on to save the new Destination
Profile.
3. Click on the Profile Name field.
6. Click on to configure the Profile
settings:
⇒Select StreamHub as Host type and set
the corresponding IP address.
9
Auto-record (ON/ OFF)
Selected Destination Profile
Starting a Live
1. From the Home menu, click on .
The LIVE menu displays information:
3. Click on and on to start a Live.
Some indications are displayed:
Network Bitrate
End to End Latency
Source Standard
Duration of Live
Selected Live profile
Selected Record profile
2. Click on to go to the LIVE menu.
4. Click on for more indications.
10
Stopping a Live
When Auto-record is enabled, additional indications appear:
Remaining Recording
Time possible on SD card
Space used on SD Card
1. Click on .
2. Click on .
3. Click on .
Duration of Live
Autres manuels pour Pro460
1
Table des matières
Autres manuels Haivision Convertisseur de média
Haivision
Haivision Makito Air v2.3 Manuel utilisateur
Haivision
Haivision Kraken CR Manuel utilisateur
Haivision
Haivision Makito HVS-ID-QS-MAKD-130 Manuel utilisateur
Haivision
Haivision S/B-292E-DVI Manuel utilisateur
Haivision
Haivision Kraken Manuel utilisateur
Haivision
Haivision Makito XR Manuel utilisateur
Haivision
Haivision Makito Manuel utilisateur
Haivision
Haivision Makito XH Manuel utilisateur
Haivision
Haivision Makito X Manuel utilisateur
Haivision
Haivision Rack400 Manuel utilisateur
