Hach SensION156 Manuel utilisateur

54650-23

and

Multiparameter Meters

pH Menu Options

Table 1 How to Change pH Menu Options

Setup How to Get There

Setup 1

Time

From any reading mode, press SETUP.

Press ENTER.

Use the number keys to change the time.

Press ENTER to accept the time.

Setup 2

Date

From any reading mode, press SETUP.

Press the UP ARROW until the Setup number is 2.

Press ENTER.

Press the UP ARROW or DOWN ARROW to toggle the date format between d/M

(day/month) and m/d (month/day).

Use the number keys to change the date.

Press ENTER to accept the date.

Setup 3

Year

From any reading mode, press SETUP.

Press the UP ARROW until the Setup number is 3.

Press ENTER.

Use the number keys to change the year.

Press ENTER to accept the year.

Setup 4

Temperature

Units

From any reading mode, press SETUP.

Press the UP ARROW until the Setup number is 4.

Press ENTER to toggle between °C and °F. The default is °C.

When the desired option is selected, press EXIT to return to the reading mode.

Setup 5

Display Lock

From pH reading mode, press SETUP.

Press the UP ARROW until the Setup number is 5.

Press ENTER to toggle display lock off and on.

When the desired option is selected, press exit to return to the reading mode.

Setup 6

Measurement

Resolution

From pH reading mode, press SETUP.

Press the UP ARROW until the Setup number is 6.

Press ENTER to toggle between the three resolution options.

When the desired option is selected, press EXIT to return to the reading mode.

Setup 7

Mid-range Auto

Buffer

Recognition

From pH reading mode, press SETUP.

Press the UP ARROW until the Setup number is 7.

Press ENTER to toggle between the buffer value of 6.86 and 7.00.

When the desired option is selected, press EXIT to return to the reading mode.

Setup 8

Auto Print

Intervals

From pH reading mode, press SETUP.

Press the UP ARROW until the Setup number is 8.

Press ENTER.

Change the print interval by pressing the UP ARROW or DOWN ARROW keys.

Press ENTER to accept the print interval.

pH Calibration Using Automatically Recognized Buffers

Note: Use a 6.86 or

7.0 pH buffer for the

mid-range buffer.

Choose the pH setup

option in Table 1.

1. Prepare two or three pH buffers according to the electrode

instruction manual. Choose from 1.68, 4.01, 7.00 (or 6.86), 10.01,

and 12.45 pH buffers.

2. Turn the instrument on. From the pH reading mode, press CAL.

CAL and flashing ?will appear in the upper display area, along

with Standard and 1.

3. Place the pH electrode into one of the buffers.

4. Press READ. The instrument will automatically recognize the

calibration buffer value. The temperature and pH values will be

updated until a stable reading is reached.

Note: The pH values for the buffers are given for 25 °C. If the calibration buffer

temperature is not 25 °C, the pH values displayed for the buffers will reflect

the correct pH value for the calibration buffer temperature.

Note: If the meter is measuring in pH mode, it automatically moves to the next

calibration step when stabilization is reached (indicated by three beeps). If

measuring in mV mode, the three beeps will still sound when the

stabilization occurs, but ENTER must be pressed to accept the reading. This

lets the operator control the acceptance point of the buffer.

5. When the reading has stabilized or been accepted, the standard

number will change to 2.

6. Remove the probe from the first buffer and rinse with deionized

water. Place the probe into the second buffer.

7. Press READ. The temperature and pH values will be updated until a

stable reading is reached.

8. When the reading has stabilized or been accepted, the standard

number will change to 3. (To accept this calibration after two

points, press EXIT.PressENTER to accept the calibration or EXIT to

cancel the calibration without saving it.)

9. Remove the probe from the second buffer and rinse with deionized

water. Place the probe in the third buffer.

10. Press READ. The temperature and pH values will be updated until a

stable reading is reached.

11. When the reading has stabilized or been accepted, the slope value

and the Store and ?icons will appear.

12. To save the calibration and return to the reading mode, press

ENTER. To exit the calibration without saving it and return to the

reading mode, press EXIT.

Conductivity Menu Options

Table 2 How to Change Conductivity Menu Options

Setup How to Get There

Setup 5

Display Lock

From conductivity reading mode, press SETUP.

Press the UP ARROW until the Setup number is 5.

Press ENTER to toggle the display lock off and on.

When the desired option is selected, press EXIT to return to the reading mode.

Setup 6

Temperature

Correction Value

From conductivity reading mode, press SETUP.

Press the UP ARROW until the Setup number is 6.

Press ENTER.

To select the non-linear function, press the UP ARROW or DOWN ARROW until the

display shows NaCl.PressENTER to accept the setting.

To select a linear conversion, scroll until the correction coefficient appears

(e.g., 2.000%).

Enter the desired value using the numeric keypad. Press ENTER to accept the

value. If a number entry error occurs, start over by pressing CE.

Note: If the compensation factor is set to 0.00%, the conductivity readings will not be

corrected for temperature.

When the desired option is selected, press EXIT to return to the reading mode.

Setup 7

TDS Correction

Factor

From conductivity reading mode, press SETUP.

Press the UP ARROW until the Setup number is 7.

Press ENTER.

Press the UP or DOWN ARROW keys to switch between linear and non-linear

correction functions.

To choose a non-linear conversion, scroll until a flashing NaCl appears, then

press ENTER.

To select a linear conversion, scroll until the conversion coefficient appears. Use

the numeric keypad to set the value of the coefficient, then press ENTER.Ifan

number entry error occurs, start over by pressing CE.

When the desired option is selected, press EXIT to return to the reading mode.

Setup 8

Auto Print

Intervals

From conductivity reading mode, press SETUP.

Press the UP ARROW until the Setup number is 8.

Press ENTER.

Change the print interval by pressing the UP ARROW or DOWN ARROW.

Press ENTER to accept the print interval.

Setup 9

Cond. Standard

Reference

Temperature

From conductivity reading mode, press SETUP.

Press the UP ARROW until the Setup number is 9.

Press ENTER to toggle between 20° C and 25° C. The default is 25° C.

Press EXIT to return to the reading mode.

Setup 10

Temperature

Correction

Off and On

From conductivity reading mode, press SETUP.

Press the UP ARROW until the Setup number is 10.

Press ENTER to toggle between off and on.

Press EXIT to return to the reading mode.

Conductivity Calibration with a Known Standard

1. Make sure the meter is in Conductivity reading mode.

2. Make sure that the reference temperature in Conductivity Setup 9

matches the reference temperature of the sample.

3. Place the probe in a conductivity standard that is in the expected

range of the samples. Agitate the probe to dislodge bubbles in the

cell. Avoid resting the probe on the bottom or side of the container.

4. Press CAL. The meter will recall the most recent type of calibration.

5. Look at the units field to see what kind of calibration is active.

Scroll to the preferred units using the UP or DOWN ARROWS.

6. Use the number keys to change the numeric value, if desired. It is

not necessary to fill up the numeric entry screen before moving on.

To clear the numeric display, press CE.

7. When the value and units are correct, press ENTER to calibrate on

the standard. The meter automatically corrects the calibration

measurement to the selected reference temperature using the NaCl-

based, non-linear temperature coefficient.

8. The meter will return to Conductivity reading mode when the

calibration is finished.

Dissolved Oxygen Menu Options

Table 3 How to Change Dissolved Oxygen Menu Options

Setup How to Get There

Setup 5

Display Lock

From dissolved oxygen reading mode, press SETUP.

Press the UP ARROW until the Setup number is 5.

Press ENTER to toggle display lock off and on.

When the desired option is selected, press EXIT to return to the reading mode.

Setup 6

Measurement

Resolution

From dissolved oxygen reading mode, press SETUP.

Press the UP ARROW until the Setup number is 6.

Press ENTER to toggle between 0.0 or 0.00 mg/L.

When the desired option is selected, press EXIT to return to the reading mode.

Setup 7

Salinity Factor

Determine sample salinity. The units for salinity are parts per thousand (0/00).

From dissolved oxygen reading mode, press SETUP.

Press the UP ARROW until the Setup number is 7.

Press ENTER.

Use the number keys to enter a salinity factor ranging from 0 to 42. Press ENTER to

accept the value, or EXIT to leave the value unchanged.

When the desired value is accepted, press EXIT to return to the reading mode.

Setup 8

Auto Print

Interval

From dissolved oxygen reading mode, press SETUP.

Press the UP ARROW until the Setup number is 8.

Press ENTER.

Change the print interval by pressing the UP ARROW or DOWN ARROW. To turn this

feature off, select off.

Press ENTER to accept the print interval.

Press the EXIT key.

Dissolved Oxygen Calibration in Water Saturated Air

1. Plug in the DO probe at least 30 minutes before calibrating to

polarize the probe.

2. Secure the calibration and storage chamber to the probe cable.

3. Prepare the calibration and storage chamber by holding it under

water and squeezing it a couple of times to pull a small amount of

water into the lower chamber through the inlet. Alternately, open

the bottom of the chamber and insert a water-soaked sponge.

Note: Avoid completely filling the lower chamber with water.

4. Insert the DO probe into the calibration and storage chamber. The

tip of the probe must not be flooded with water or be holding a drop

of water on the membrane.

5. Allow at least ten minutes for the atmosphere in the chamber to

reach a steady state.

Note: Gently squeezing the lower chamber a couple of times to force water

saturated air into the probe chamber will speed up stabilization.

Note: Keep the DO probe at a uniform temperature. When holding the probe,

do not touch the metallic button on the side of the probe. The button is a

thermistor that senses temperature. An inaccurate calibration will result if

the temperature of the thermistor is different from the probe membrane.

6. Press the DO key to put the meter in DO reading mode.

7. Press the CAL key located in the lower left corner of the keypad.

8. The display will show 100%. Press the ENTER key. The stabilizing

icon will appear while the meter completes the calibration.

9. When the calibration is complete, the meter will return to reading

mode. Press the EXIT key during the calibration sequence to back

out of the calibration routine, one screen at a time, without

completing a calibration.

HACH COMPANY

WORLD HEADQUARTERS

P.O. Box 389

Loveland, Colorado 80539-0389

Telephone: (970) 669-3050

FAX: (970) 669-2932

FOR TECHNICAL ASSISTANCE, PRICE INFORMATION AND ORDERING:

Call 800-227-4224

Contact the HACH office or distributor serving you.

www.hach.com techhelp@hach.com

In the U.S.A. -

Outside the U.S.A. -

On the Worldwide Web - ; E-mail -

toll-free

Measuring Tips

•Turn the meter on and off with the I/O/EXIT key.

•To review a calibration, press the REVIEW key.

•When using the dissolved oxygen probe, polarize the probe by

plugging it into the meter before attempting a calibration or

measurement. The length of time required for polarization depends

on how long the electrode has been unplugged. It can vary from 60

minutes (for a new probe) to a few seconds (if you momentarily

disconnect the probe). If the CAL and ?icons flash after calibrating

the DO probe, the probe is not polarized.

•Connect the pH electrode to the black connector, and the DO or

conductivity electrodes to the blue connector.

•If the meter is not in reading mode, it may take a few key presses to

turn the meter off.

•If the readings do not change when you move an electrode to a new

sample, the meter probably has the Display Lock set to ON for the

parameter you are reading. If the Lock Icon appears in the lower left

portion of the display, the setting is on. To change the setting, use

setup number 5. Or, press READ to initiate a new reading.

•When calibrating pH or dissolved oxygen, make sure that the

instrument is displaying readings to the correct number of decimal

places for your needs. This will assure that your calibration is

sufficiently precise. To change the setting, use setup number 6.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Hach Multimètre

Hach

Hach Sension 156 Manuel utilisateur

Manuels Multimètre populaires d'autres marques

Agilent Technologies

Agilent Technologies 34420A Manuel utilisateur

Fluke

Fluke 83 Manuel utilisateur

Hameg

Hameg HM 8012 Manuel utilisateur

Mastech

Mastech MY70 Manuel utilisateur

Steren

Steren MUL-300 Manuel utilisateur

Somogyi Elektronic

Somogyi Elektronic home SMA 92 Manuel utilisateur

Gossen MetraWatt

Gossen MetraWatt METRAmax 6 Manuel utilisateur

PeakTech

PeakTech 4000 Manuel d'utilisation et d'entretien

YOKOGAWA

YOKOGAWA 90050B Manuel utilisateur

Gossen MetraWatt

Gossen MetraWatt METRALINE DMM16 Manuel utilisateur

Fluke

Fluke 8846A Manuel d'utilisation et d'entretien

Tempo Communications

Tempo Communications MM200 Manuel utilisateur

Elenco Electronics

Elenco Electronics CM-1555 Manuel utilisateur

Mastech

Mastech MS8238C Manuel utilisateur

SDAR

SDAR 830A, 830B, 830D, 830C Manuel utilisateur

RS PRO

RS PRO RS-9519BT Manuel utilisateur

BGS technic

BGS technic 8890 Manuel utilisateur

Amprobe

Amprobe Hexagon 60 Manuel utilisateur