H3C VCF Manuel utilisateur
Copyright © 2017, New H3C Technologies Co., Ltd. and its licensors
All rights reserved
No part of this manual may be reproduced or transmitted in any form or by any means without prior written
consent of New H3C Technologies Co., Ltd.
Trademarks
H3C, , H3CS, H3CIE, H3CNE,Aolynk, , H3Care, , IRF, NetPilot, Netflow, SecEngine,
SecPath, SecCenter, SecBlade, Comware, ITCMM and HUASAN are trademarks of New H3C Technologies
Co., Ltd.
All other trademarks that may be mentioned in this manual are the property of their respective owners
Notice
The information in this document is subject to change without notice. Every effort has been made in the
preparation of this document to ensure accuracy of the contents, but all statements, information, and
recommendations in this document do not constitute the warranty of any kind, express or implied.
Preface
This installation guide describes the procedure for installing and removing the VCF OpenStack
plug-ins.
This preface includes the following topics about the documentation:
•Audience.
•Conventions.
•Obtaining documentation.
•Technical support.
•Documentation feedback.
Audience
This documentation is intended for:
•Network planners.
•Field technical support and servicing engineers.
•Network administrators working with H3C VCF controllers.
Conventions
This section describes the conventions used in the documentation.
Command conventions
Convention Description
Boldface Bold text represents commands and keywords that you enter literally as shown.
Italic Italic text represents arguments that you replace with actual values.
[ ] Square brackets enclose syntax choices (keywords or arguments) that are optional.
{ x | y | ... }
Braces enclose a set of required syntax choices separated by vertical bars, from which
you select one.
[ x | y | ... ]
Square brackets enclose a set of optional syntax choices separated by vertical bars,
from which you select one or none.
{ x | y | ... } *
Asterisk marked braces enclose a set of required syntax choices separated by vertical
bars, from which you select at least one.
[ x | y | ... ] *
Asterisk marked square brackets enclose optional syntax choices separated by vertical
bars, from which you select one choice, multiple choices, or none.
&<1-n> The argument or keyword and argument combination before the ampersand (&) sign
can be entered 1 to n times.
# A line that starts with a pound (#) sign is comments.
GUI conventions
Convention Description
Boldface Window names, button names, field names, and menu items are in Boldface. For
example, the New User window appears; click OK.
Convention Description
> Multi-level menus are separated by angle brackets. For example, File > Create >
Folder.
Symbols
Convention Description
WARNING! An alert that calls attention to important information that if not understood or followed
can result in personal injury.
CAUTION: An alert that calls attention to important information that if not understood or followed
can result in data loss, data corruption, or damage to hardware or software.
IMPORTANT: An alert that calls attention to essential information.
NOTE: An alert that contains additional or supplementary information.
TIP: An alert that provides helpful information.
Obtaining documentation
To access the most up-to-date H3C product documentation, go to the H3C website at
http://www.h3c.com.hk
To obtain information about installation, configuration, and maintenance, click
http://www.h3c.com.hk/Technical_Documents
To obtain software version information such as release notes, click
http://www.h3c.com.hk/Software_Download
Technical support
service@h3c.com
http://www.h3c.com.hk
Documentation feedback
You can e-mail your comments about product documentation to info@h3c.com.
We appreciate your comments.
i
Contents
Overview·········································································································1
VCF Neutron plug-ins ········································································································································1
Preparing for installation·················································································2
Hardware requirements ·····································································································································2
Software requirements·······································································································································2
Installing OpenStack plug-ins ·········································································3
Installing the Python tools··································································································································3
Installing the VCF Neutron plug-ins ···················································································································3
Prerequisites··············································································································································3
Installation procedure·································································································································3
Verifying the installation·····························································································································6
Parameters and fields································································································································7
Removing the VCF Neutron plug-ins ···············································································································11
Upgrading the VCF Neutron plug-ins···············································································································11
1
Overview
This document describes how to install the virtual converged framework (VCF) Neutron plug-ins that
are compatible with OpenStack on SUSE.
VCF Neutron plug-ins
Neutron is a type of OpenStack services used to manage all virtual networking infrastructures (VNIs)
in an OpenStack environment. It provides virtual network services to the devices managed by
OpenStack computing services.
VCF Neutron plug-ins are developed for VCF controller based on the OpenStack framework. VCF
Neutron plug-ins can obtain network configuration from OpenStack through REST APIs and
synchronize the configuration to the VCF controllers. They can obtain settings for the tenants'
networks, subnets, routers, ports, FW, LB, or VPN. Different types of VCF Neutron plug-ins can
provide the following features for tenants:
•VCF Neutron Core plug-in—Allows tenants to use basic network communication for cores,
including networks, subnets, routers, and ports.
•VCF Neutron L3_Routing—Allows tenants to forward traffic to each other at Layer 3.
•VCF Neutron FWaaS plug-in—Allows tenants to create firewall services.
•VCF Neutron LBaaS plug-in—Allows tenants to create LB services.
•VCF Neutron VPNaaS plug-in—Allows tenants to create VPN services.
2
Preparing for installation
Hardware requirements
To install VCF Neutron plug-ins on a server or a virtual machine, make sure the server or virtual
machine meets the hardware requirements in Table 1.
Table 1 Hardware requirements
CPU Memory size Disk space
Single-core and multicore
CPUs 2 GB and above 5 GB and above
Software requirements
Table 2 shows the software requirements for installing the VCF Neutron plug-ins.
Table 2 Software requirements
Item Supported version
OpenStack OpenStack Juno 2014.2 operates on SUSE Linux Enterprise Server 11
SP3 (x86_64)
IMPORTANT:
Before you install the Neutron plug-ins, make sure the following requirements are met:
•Your system has Internet access because the system must first access the Internet to set up the
installation environment.
•Make sure the OpenStack environment is deployed correctly. For example, the /etc/hosts file on
all nodes has the host name-IP address mappings. For information about the OpenStack
environment deployment, see the installation guide for the specific OpenStack version on the
official website.
3
Installing OpenStack plug-ins
Install the VCF Neutron plug-ins on an OpenStack control node. Before installation, you need to
install the Python tools on the associated node.
Installing the Python tools
Before you install the plug-ins, first download the Python tools online and install them.
[root@localhost ~]# zypper install –y python-pip python-setuptools
Installing the VCF Neutron plug-ins
Prerequisites
The VCF Neutron plug-ins are included in the VCF OpenStack package. Perform the following steps
to download the VCF OpenStack package from the H3C website:
1. In the Web browser address bar, enter http://www.h3c.com/cn/Software_Download. Select
SDN > H3C Virtual Converged Framework Controller, and download the VCF OpenStack
package of the required version.
2. Copy the VCF OpenStack package to the installation directory on the server or virtual machine,
or upload it to the installation directory through FTP, TFTP, or SCP.
NOTE:
If you decide to upload the VCF OpenStack package through FTP or TFTP, use the binary mode to
avoid damage to the package.
Installation procedure
Some parameters must be configured with the required values as described in "Parameters and
fields."
To install the VCF Neutron plug-ins:
1. Change the working directory to where the VCF OpenStack package (an .egg file) is saved, and
install the package on the OpenStack control node. The name of the VCF OpenStack package
is VCF_CONTROLLER_PLUGIN-version1_version2-py2.7. version1 represents the version of
the package and version2 represents the version of OpenStack.
In the following example, the VCF OpenStack package is saved to the path /root.
[root@localhost ~]# easy_install --no-deps
VCF_CONTROLLER_PLUGIN-D2156_juno_2014.2-py2.7.egg
Processing VCF_CONTROLLER_PLUGIN-D2156_juno_2014.2-py2.7.egg
creating
/usr/local/lib64/python2.6/site-packages/VCF_CONTROLLER_PLUGIN-D2156_juno_2014.2-
py2.7.egg
Extracting VCF_CONTROLLER_PLUGIN-D2156_juno_2014.2-py2.7.egg to
/usr/local/lib64/python2.6/site-packages
Adding VCF-CONTROLLER-PLUGIN D2156-juno-2014.2 to easy-install.pth file
Installing h3c-vcfplugin script to /usr/local/bin
Installing h3c-agent script to /usr/local/bin
4
Installed
/usr/local/lib64/python2.6/site-packages/VCF_CONTROLLER_PLUGIN-D2156_juno_2014.2-
py2.7.egg
Processing dependencies for VCF-CONTROLLER-PLUGIN==D2156-juno-2014.2
Finished processing dependencies for VCF-CONTROLLER-PLUGIN==D2156-juno-2014.2
IMPORTANT:
For successful installation, you must specify the --no-deps option in the easy_install command
to ignore the software dependencies.
2. Install the VCF Neutron plug-ins.
[root@localhost ~]# h3c-vcfplugin controller install
3. Use the vi editor to open the neutron.conf configuration file.
[root@localhost ~]# vi /etc/neutron/neutron.conf
4. Press Ito switch to the insert mode, and set the parameters in the neutron.conf configuration
file. For information about the parameters, see "neutron.conf."
[DEFAULT]
core_plugin = ml2
service_plugins =
h3c_vcfplugin.l3_router.h3c_l3_router_plugin.H3CL3RouterPlugin,firewall,lbaas,vpn
aas
[service_providers]
service_provider=FIREWALL:H3C:h3c_vcfplugin.fw.h3c_fwplugin_driver.H3CFwaasDriver
:default
service_provider=LOADBALANCER:H3C:h3c_vcfplugin.lb.h3c_lbplugin_driver.H3CLbaasPl
uginDriver:default
service_provider=VPN:H3C:h3c_vcfplugin.vpn.h3c_vpnplugin_driver.H3CVpnPluginDrive
r:default
5. Press Esc to quit the insert mode.
6. Enter :wq to exit the vi editor and save the neutron.conf file.
:wq
7. Use the vi editor to open the ml2_conf.ini configuration file.
[root@localhost ~]# vi /etc/neutron/plugins/ml2/ml2_conf.ini
8. Press Ito switch to the insert mode, and set the parameters in the ml2_conf.ini configuration
file. For information about the parameters, see "ml2_conf.ini."
[ml2]
type_drivers = vxlan,vlan
tenant_network_types = vxlan,vlan
mechanism_drivers = ml2_h3c
extension_drivers = ml2_extension_h3c
[ml2_type_vlan]
network_vlan_ranges = physicnet1:1000:2999
[ml2_type_vxlan]
vni_ranges = 1:500
9. Press Esc to quit the insert mode.
10. Enter :wq to exit the vi editor and save the ml2_conf.ini file.
:wq
11. Use the vi editor to open the local_settings configuration file.
12. Press Ito switch to the insert mode.
5
Set the values for the LB, FW, and VPN fields in the OPENSTACK_NEUTRON_NETWORK
parameter to enable the associated configuration pages in OpenStack Web. For information
about the fields, see "OPENSTACK_NEUTRON_NETWORK."
[root@localhost ~]# vi /etc/openstack-dashboard/local_settings
OPENSTACK_NEUTRON_NETWORK = {
'enable_lb': True,
'enable_firewall': True,
'enable_quotas': True,
'enable_vpn': True,
# The profile_support option is used to detect if an external router can be
# configured via the dashboard. When using specific plugins the
# profile_support can be turned on if needed.
'profile_support': None,
#'profile_support': 'cisco',
}
13. Press Esc to quit the insert mode.
14. Enter :wq to exit the vi editor and save the local_settings file.
:wq
15. Use the vi editor to open the ml2_conf_h3c.ini configuration file.
[root@localhost ~]# vi /etc/neutron/plugins/ml2/ml2_conf_h3c.ini
16. Press Ito switch to the insert mode, and set the parameters in the ml2_conf_h3c.ini
configuration file. For information about the parameters, see "ml2_conf_h3c.ini."
[VCFCONTROLLER]
url = https://127.0.0.1:8443
username = sdn
password = skyline123
domain = sdn
timeout = 300
retry = 10
vnic_type=ovs
hybrid_vnic = True
default_tenant_mode = False
ip_mac_binding = False
denyflow_age =300
white_list = False
binddefaultrouter = False
auto_create_tenant_to_vcfc = True
router_binding_public_vrf = False
enable_subnet_dhcp = True
dhcp_lease_time = 365
firewall_type = SERVICE_CHAIN
lb_type = GATEWAY
resource_mode = NFV
auto_delete_tenant_to_vcfc = True
auto_create_resource = True
nfv_ha = True
vds_name = VDS1
enable_metadata = False
use_neutron_credential = False
Table des matières
Autres manuels H3C Contrôleurs
H3C
H3C WBC580 G2 Manuel utilisateur
H3C
H3C WX3500H series Manuel utilisateur
H3C
H3C LS8M1WCMA0-OVS Manuel utilisateur
H3C
H3C SeerEngine-DC Manuel utilisateur
H3C
H3C OpenStack SeerEngine-DC Manuel utilisateur
H3C
H3C WX3000H series Manuel utilisateur
H3C
H3C WX Manuel utilisateur
H3C
H3C WX Series Manuel d'installation
H3C
H3C WX5004 Manuel utilisateur
H3C
H3C WX5002 Manuel utilisateur
