H-L Data Storage HLT-SDBF1 Manuel utilisateur

Confidential

MODEL : HLT-SDBF1

Customer P/N :

Thermal Sensing Board

SPECIFICATIONS

Development Department

APPROVED

2021.09.27

MODEL : HLT-SDBF1

Customer P/N :

TO :

APPLICATION

Traced by Checked by Approved by

APPLICANT

Confidential

IT.KIM

NH.KWAK

SH.BAE

KW.KIM

SS.KIM

JH. OH

BG.Ahn SP. KONG

HLT-SDBF1

Confidential

Revision

No. Date

of Rev. Contents of Revision Changed

page

0.1 2021.06.18 Initial Update

0.2 2021.06.24 Modify STANDARD PERFORMANCE 5

0.3 2021.09.24 Modify GENERAL SPECIFICATIONS

Modify RELIABILITY 3

0.4 2021.09.27 Modify STANDARD PERFORMANCE (Add

Software)

Modify RELIABILITY

5 ~ 8

Revision History

HLT-SDBF1

Confidential

1. SCOPE OF DOCUMENT

2. GENERAL SPECIFICATIONS

3. STANDARD CONDITION OF EVALUATION

4. STANDARD PERFORMANCE

5. RELIABILITY

6. LIFE TEST

7. PACKING SPECIFICATION

8. HANDLING

9. ATTACHMENT

Fig. 1 APPEARANCE DIAGRAM

CONTENTS

-1 -

HLT-SDBF1

Confidential

■This document describes the specification of Thermal Sensing Board

“HLT-SDBF1”.

■The provisions of this document maybe altered upon agreement between

both parties.

■If any disagreement should arise, these two parties shall meet in good

faith to resolve the problem.

■Within the range of these specifications, parts are subject to change

without notice for technical improvement.

■Please be sure to observe the following each time you deliver your

finished and/or semi-finished products containing the device(s).

Otherwise, HLDS may not be able to assume the responsibility for things to

happen.

• Always use the device(s) within conditions given in the specifications.

• Never given additional process to the device(s).

• Before use, be sure to read this instruction manual and use the product

safely and correctly.

• The illustrations in the user manual may differ from the actual product,

and the contents may be partially changed without notice to the user for

performance improvement.

• To use the product in connection with another device, first check that the

device is compatible with the product.

1. SCOPE OF DOCUMENT

-2 -

HLT-SDBF1

Confidential

Items Specifications

Display 29 Inch / 1920 x 540 (Support Touch Display)

CPU RK3288 (4 x A17)

RAM / eMMC 1GB / 8GB

RGB Camera HD (1280x720), SD(640 x480)

Thermal Sensor Heimann 32x32, HTPA32x32dR2L5.0/0.85F7.7eHiC

LED Lighting O

Speaker O

Wi-Fi / BT Wi-Fi 2.4G / BT 4.2(Profile : A2DP, HID)

Ethernet 10M/100M Adaptive Ethernet

USB Type-A 1ea, OTG 1ea / Format : FAT32, NTFS

Other I/O Relay

Power DC 12V / 4A (Power consumption 35W - Typical)

Dimensions 226 x 775 x 42mm (W x H x D)

Mass About 4.0 Kg

Operating temperature

and humidity 5℃to +35℃, below 65%RH (without dew, frost)

(Recommendation 25℃)

Storage temperature

and humidity (Transportation) -20℃to +60℃, below 90%RH (without dew, frost)

Appearance Fig.1

Operating System Android 7.1.2

Detection distance

(Face/Thermal/Mask) 0.3m ~ 0.8m (Recommendation : 0.5m)

Detection time

(Face/Thermal/Mask each.) Under 5sec

Thermal detection range 32 ~ 42℃(±0.3℃)

Thermal detection accuracy ≤±0.3˚C at 0.5m about 25˚C ambient temperature

Thermal detection precision ≤±0.3˚C at 0.5m about 25˚C ambient temperature

Face recognition probability ≥ 90% without mask (tentative)

Mask detection probability ≥ 95% (tentative)

Face registration count About 1.000 people

QR code read O

Support movie format Webm (VP9)

Languages Korean/Japanese/English

-3 -

2. GENERAL SPECIFICATIONS

*¹The detection distance or face recognition speed may vary depending on the usage

environment.

HLT-SDBF1

Confidential

-4 -

Note.

(1) The detection distance or face recognition speed may vary depending on

the usage environment.

3. STANDARD CONDITIONS OF EVALUATION

(1) Environment Temperature 25℃±2 ℃

Humidity 60％±5％[RH]

We can adopt temperature range 15 ℃～35 ℃,humidity range

45％～65％[RH] If it occurs no doubt about judgment.

(2) Environment of Operating Condition

5℃to +35℃, below 65%RH (without dew, frost)

(3) Evaluation

Use HLDS standard measuring equipment.

HLT-SDBF1

Confidential

-5 -

4. STANDARD PERFORMANCE

Detection Quality Validation Metrics

Item Spec. Remark

Detection distance

(Face/Thermal/Mask) 0.3m ~ 0.8m (Recommendation : 0.5m)

Thermal detection range 32 ~ 42℃(±0.3℃)

Face registration number About 1,000 people

Detection time

(Face/Thermal/Mask each.) Under 5sec

※For Mask & Thermal detection metric test methodology, refer to “HLDS SAFE PASS

PLUS User Manual".

HLT-SDBF1

Confidential

-6 -

4. STANDARD PERFORMANCE

Software Function Validation Metrics

Item Spec. Remark

Normal Performance Test

1. Change password

2. Log-In

3. Device setting

4. Device operating

5. Face recognition

6. ChangeAccount

On/Off by function, change of setting

value and confirmation of operation

※Environment Temperature 25℃±2 ℃

Humidity 60％ ± 5 ％[RH]

Temperature measurement

Repeat measurement during 2 hours (5

times / sets) every 30 minutes using

blackbody. (Under ±0.3℃)

※Environment Temperature 25℃±2 ℃

Humidity 60％ ± 5 ％[RH]

※Distance between TSB1 & blackbody

is 50cm.

Face registration

1. With Mask : Up to 80%

2. Without Mask : Up to 90%

※Environment Temperature 25℃±2 ℃

Humidity 60％ ± 5 ％[RH]

※When the face is aligned with the

indicator line.

QR Code

1. QR code + Face recognition

2. Check QR code only

: Save QR code only KR COVID QR

(Naver, Kakao, PASS)

※Environment Temperature 25℃±2 ℃

Humidity 60％ ± 5 ％[RH]

※When the QR is aligned with the

indicator line. (Check QR code only case)

※For Mask & Thermal detection metric test methodology, refer to “HLDS SAFE PASS

PLUS User Manual ".

HLT-SDBF1

Confidential

-7 -

4. STANDARD PERFORMANCE

Software Function Validation Metrics

Item Spec. Remark

Mask detection

Up to 95%

※Environment Temperature 25℃±2 ℃

Humidity 60％ ± 5 ％[RH]

※When the face is aligned with the

indicator line.

Information Display

1. Video play

- Format : WEBM(VP9)

- File size : Maximum 150MB

- Resolution : 540 x 1586 (pixel)

※Interruption may occur depending

on the state of the file.

2. Image display

- Format : JPG, PNG

- File size : Maximum 10MB

- Resolution : 540 x 1586 (pixel)

※Environment Temperature 5℃to

+35℃, below 65%RH (without dew, frost)

※For Mask & Thermal detection metric test methodology, refer to “HLDS SAFE PASS

PLUS User Manual ".

Table des matières

Manuels Accessoires populaires d'autres marques

Hillco

Hillco 2810 Manuel utilisateur

Siemens

Siemens QSA2700D Manuel de l'opérateur

Contours

Contours ZY024 Manuel utilisateur

Saivod

Saivod VS621 Manuel utilisateur

Virtuox

Virtuox VirtuCLEAN 2.0 Manuel utilisateur

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Manuel utilisateur

Z-Wave

Z-Wave HSD-200Z Manuel utilisateur

turck

turck FMX-IM-2UPLI63FX Manuel utilisateur

Decagon Devices

Decagon Devices 10HS Manuel utilisateur

UPPAbaby

UPPAbaby Cup Holder Manuel utilisateur

Elko

Elko SmartSensor Leakage Wireless Manuel utilisateur

Grizzly

Grizzly H8371 Manuel utilisateur

Panasonic

Panasonic HG-T Series Manuel utilisateur

IFM Electronic

IFM Electronic Efector 250 Series Guide de référence

DigiDesign

DigiDesign 888/24 I/O Manuel utilisateur

PROZIS

PROZIS QUAY Manuel utilisateur

patagonia

patagonia PSI Vest Manuel utilisateur

SFC Energy

SFC Energy EFOY GO! Manuel utilisateur