6
NOTE
1. Do not place the monitor in an extreme environment such as high temperature or low
temperature. This product does not protect against thunder, lightning, and rain. Make it used in a
normal indoor environment.
2. Knocking, impacting, or disassembling the product may cause the detection to be inaccurate.
Please keep the unit properly.
3. To wire RS485/Relays signal output, please find professionals to make the wiring connection
with the guidance of the instruction book (please check it in the packaging box). Please be careful
about the danger of electricity during wiring connection.
4. For the IoT solution between the GrowPT02 and other Smart devices such as fans, humidifiers,
and Co2 generators, etc., please find the instruction book in the packaging box.
WARNING
1. Please keep the product unreachable for children and babies.
2. Please don't dismantle, modify, heating the product.
3. Avoid falling or heavy hitting.
4. Do not touch any part of the product with wet hands.
5. Do not allow the metal objects (like pins, keys) to contact terminals or plugs.
6. Do not cut, damage, or modify the power cord.
How to connect with Wi-Fi Tuya App?
Download “Smart Tuya” or “Smart life” from your app store
Device Operation
Long press the Power button. When the GrowPT02 device is powered On, the Wi-Fi
function will automatically turn on (The Wi-Fi icon starts blinking). At this time, you can
open the Tuya app to connect.
If there is no connection within two minutes, Wi-Fi will automatically shut down.
Rapidly press the Power button three times in a row, Wi-Fi will turn on, and you can try to
connect. Rapidly press the Power button three times again, Wi-Fi will turn off.
If you want to connect to another phone or reset the connection, just reset the device by
switching on the GrowPT02 and rapidly pressing the power button five times in a row to
wait for 5-10 seconds until the Wi-Fi icon flashes to start the new connection process.
