GW Instek GDM-357 Manuel utilisateur

Ⅰ. OVERVIEW

Ⅱ. SAFETY INFORMATION

The brand-new GDM-357 is a 2000-count handheld digital multimeter featuring remarkably

stable and reliable operation. It is designed with large-scale integrated circuits,

a dual integral A/D converter and also offers overload protection for all ranges. The DMM can

measure DC&AC voltage, DC&AC current, resistance, capacitance, diode, transistor,

temperature, frequency, battery and continuity, which makes it a perfect solution for your work.

This instrument is designed and manufactured in compliance with: GB4793, IEC61010-1,

IEC1010-2-032, CAT.I 1000V,CATII 600V, Pollution Degree 2 and Double Insulation standards.

Warning

Please operate the instrument as specified in the manual, otherwise the protection offered

by the instrument would be compromised.

test leads

The red and black test leads should be inserted in the proper terminals and ensured with

good contact.

Switching the range

Use only the replacement fuse with the same model or identical electrical specifications.

compromised.

Clean the instrument casing with slightly damp cloth and mild agent. No abrasives and

solvents are allowed.

International Electrical Symbols

Ⅲ. PRODUCT FEATURES

Display Count: 1999.

Auto Power Off.

Temperature Range: Working:0℃~ 40℃(32℉~ 104℉);

Storage: -10℃~ 50℃(14℉~ 122℉).

Low Battery Indication: on upper left corner of LCD.

Data Hold

(Main unit+holster+tilt stand+battery, excluding test leads)

Ⅳ. TECHNICAL SPECIFICATIONS

Input

RMS.

(RMS value of sinewave)

Continuity and Diodes

(RMS value of sinewave)

RMS.

Note: At 200MΩ range, the instruments normally displays 10 digits when the test leads are

shorted. Please subtract 10 digits from the subsequent measurement readings.

Relative Humidity ≤65% for measurements at 200MΩ range.

＞50µF, for reference only.

400Hz, 40mVrms

discharging the capacitor.

Resistance≤10Ω, the buzzer sounds;

＞10Ω, the buzzer doesn't

necessarily sound;

Display approximate resistance

value, unit: Ω.

GDM-357

DC current

GDM-357

AC current

GDM-357

P/N:82DM-35700M01

Ⅴ.

near the input terminals

Multimeter Description

Rotary switch

Input Terminals

Measuring DC Voltage

Measuring Resistance

Measuring Capacitance

Measuring Temperature

Testing Diodes and Continuity

Auto Power Off

Measuring AC Voltage

Measuring DC current

Measuring AC Current

1) Insert test leads into input terminals(Red to V and black to COM).

2) Set the rotary switch to 　　　　　range; Connect test leads to the power or load under test,

and the positive polarity of the test end will indicate.

1) Insert test leads into input terminals(Red to V and black to COM).

2) Set the rotary switch to V range; Connect test leads to the power or load under test.

1) Insert the black test lead into COM terminal. For current≤200mA, insert the red test lead into

mA terminal. If current goes up to 10A, insert red test lead into 10A terminal.

2) Set the rotary switch to A range; Connect test leads to the tested circuit in series.

The polarity of red test lead will show.

1) Insert the black test lead into COM terminal. For current≤200mA, insert the red test lead into

mA terminal. If the current goes up to 10A, insert red test lead into 10A terminal.

2) Set the rotary switch to A range; Connect test leads to the tested circuit in series.

1) Insert test leads into input terminals(Red to Ω and black to COM).

2) Set the rotary switch to Ω range; Connect test leads to tested resistor in parallel.

all capacitors

1) Although the capacitance ranges have been protected internally, you still need to discharge

all tested capacitors so as to avoid any damage to the instrument or any measurement error.

terminals

1) Insert test leads into input terminals(Red to VΩ and black to COM,"+" for the red test lead).

Then set the rotary switch to 、; Connect test leads to tested diode. The displayed

reading is the approximate value of forward voltage drop of diode.

2) Connect test leads to the circuit under test, if the resistance between two tested ends

is ＜10 Ω , the built-in buzzer sounds.

Auto Power Off

power off,

Ⅵ.

randomly

voltages higher than 1000V DC or 750AC RMS.

current ranges

test leads

the test leads from input terminals.

Ⅶ.

Operating Manual

Test Leads

1 pc

1 pair

1 pc

This manual contains proprietary information, which is protected by copyright. All rights are

reserved. No part of this manual may be photocopied, reproduced or translated to another

language without prior written consent of Good Will company.

The information in this manual was correct at the time of printing. However, Good Will continues

to improve products and reserves the rights to change specification, equipment, and maintenance

procedures at any time without notice.

Good Will Instrument Co., Ltd.

No. 7-1, Jhongsing Rd., Tucheng Dist., New Taipei City 236, Taiwan

The content of this manual is subject to changes without notice.

Autres manuels GW Instek Multimètre

GW Instek

GW Instek GDM-8245 Manuel utilisateur

GW Instek

GW Instek GDM-8351 Manuel utilisateur

GW Instek

GW Instek GDM-394 Manuel utilisateur

GW Instek

GW Instek GDM-8261 Manuel utilisateur

GW Instek

GW Instek GDS-207 Manuel utilisateur

GW Instek

GW Instek GDM–825 A Series Mode d’emploi

GW Instek

GW Instek GDM-452 Manuel utilisateur

GW Instek

GW Instek GDM-532 Manuel utilisateur

GW Instek

GW Instek GDM-8245 Manuel utilisateur

GW Instek

GW Instek GDM-8200A Series Manuel utilisateur

GW Instek

GW Instek GDM-8246 Manuel utilisateur

GW Instek

GW Instek GDM-8245 Manuel utilisateur

GW Instek

GW Instek GDM-8251 Manuel utilisateur

GW Instek

GW Instek GDM-8351 Manuel utilisateur

GW Instek

GW Instek GDM-8245 Manuel utilisateur

GW Instek

GW Instek GDM-8261A Manuel utilisateur

GW Instek

GW Instek GDM-8246 Manuel utilisateur

GW Instek

GW Instek GDM-8200A Series Manuel utilisateur

GW Instek

GW Instek GDM-356 Manuel utilisateur

GW Instek

GW Instek GDM-8352 Manuel utilisateur

GW Instek

GW Instek GDM-8261A Manuel utilisateur

GW Instek

GW Instek GDM-8261 Manuel utilisateur

GW Instek

GW Instek GDM-350B Manuel utilisateur

GW Instek

GW Instek GDM-531 Manuel utilisateur

Manuels Multimètre populaires d'autres marques

Agilent Technologies

Agilent Technologies 34420A Manuel utilisateur

Fluke

Fluke 83 Manuel utilisateur

Hameg

Hameg HM 8012 Manuel utilisateur

Mastech

Mastech MY70 Manuel utilisateur

Steren

Steren MUL-300 Manuel utilisateur

Somogyi Elektronic

Somogyi Elektronic home SMA 92 Manuel utilisateur

Gossen MetraWatt

Gossen MetraWatt METRAmax 6 Manuel utilisateur

PeakTech

PeakTech 4000 Manuel d'utilisation et d'entretien

YOKOGAWA

YOKOGAWA 90050B Manuel utilisateur

Gossen MetraWatt

Gossen MetraWatt METRALINE DMM16 Manuel utilisateur

Fluke

Fluke 8846A Manuel d'utilisation et d'entretien

Tempo Communications

Tempo Communications MM200 Manuel utilisateur

Elenco Electronics

Elenco Electronics CM-1555 Manuel utilisateur

Mastech

Mastech MS8238C Manuel utilisateur

SDAR

SDAR 830A, 830B, 830D, 830C Manuel utilisateur

RS PRO

RS PRO RS-9519BT Manuel utilisateur

BGS technic

BGS technic 8890 Manuel utilisateur

Amprobe

Amprobe Hexagon 60 Manuel utilisateur