GST DC-9204 Manuel utilisateur

30306359 Issue 1.04

Features

Alarming by pressing, reset by a special key.

Plug-in structure.

Designed to comply with EN 54-11.

Description

DC-9204 Innovation Manual Call Point (MCP) is

non-addressable. It alarms by the current caused by

pressing the action plate. It can be simply connected

to compatible conventional fire alarm system from

various manufacturers. This MCP is suitable for public

places.When there is fire, pressing the action plate on

this MCP can send alarm signal to compatible

conventional fire alarm control panel.

Connection and Cabling

Terminals on the MCP base are shown as Fig. 1.

I+ I- O+O-

60mm

Fig. 1

I+, I-: Input signal, connecting with compatible control

panel or the previous MCP.

O+, O-: Output signal, connecting with the next MCP.

Recommended Wiring

0.5mm2or above fire cable, subject to local codes.

Installation

The conduit can be surface mounted or flush

mounted.

Surface mounting:

First install the back box onto the wall using 4 screws,

then install the base onto the back box. Connect

cables to corresponding terminals as described above.

Hook the juts of the MCP body to the base, and then

press the part below the action plate to combine them

completely. Fig. 2 shows surfacemounting.

Flush mounting:

Install the base onto the back box. Then combine the

enclosure and base the same as surface mounting.

Fig. 3 shows flush mounting.

Back Box

Base

MCP Body

Fig. 2

Base MCP Body

Back Box

Fig. 3

Application

Application of the MCP is shown in Fig. 4.

Output-

Output+

Compatible Fire Alarm

Control Panel

Alarm Zone O-O+I-I+

To the next device

MCP

Fig. 4

0832-CPD-0789

548g/03

DC-9204

Innovation Manual Call Point

30306359 Issue 1.04

Usage of the key

Vertically insert the key into the key-hole, then push it

with force and turn it clockwise. Turn the key back and

pull it out when the action plate is rebounded.

Usage of the test tool

The test tool is used to keep continuity during

commissioning or maintenance when MCP is not

installed, so that cable test can be carried out easily

and make the circuit completed.

Limited Warranty

GST warrants that the product will be free of charge

for repairing or replacing from defects in design,

materials and workmanship during the warranty period.

This warranty doesn’t cover any product that is found

to have been improperly installed or used in any way

not in accordance with the instructions supplied with

the product. Anybody, including the agents,

distributors or employees, is not in the position to

amend the contents of this warranty. Please contact

your local distributor for products not covered by this

warranty.

Specification

Operating Voltage

24VDC (12VDC ～28VDC)

Standby Current

0mA

Alarm Current

≤30mA(equivalent

resistance is 470/1W)

Indicator

Red. Illuminates after

alarming.

Type of Initiating

Part

Reusable

Initiating Mode

Pressing the action plate

manually

Resuming Mode

Manually resumed by a

special key

Wiring

two-wire

Class

Type A, indoor use

Ingress Protection

Rating

IP43

Ambient

Temperature

-10℃～+55℃

Relative Humidity

≤95%, non-condensing

Material of

Enclosure

ABS

Dimensions

(L×W×H)

87.1mm×87.1mm×58mm

(with back box)

87.1mm×87.1mm×23mm

(without back box)

Mounting Hole

Distance

60mm

Weight

About 160g (with back box)

About 107g (without back

box)

This Data Sheet is subject to change without notice. Please contact GST for more information or questions.

Gulf Security Technology Co., Ltd.

No. 80, Changjiang East Road, QETDZ, Qinhuangdao, Hebei, P. R. China 066004

Tel: +86 (0) 335 8502434 Fax: +86 (0) 335 8502532

service.gs[email protected]tc.com www.gst.com.cn

Autres manuels GST Système de sécurité

GST

GST GST116 Manuel utilisateur

GST

GST DI-9204E Manuel du propriétaire

GST

GST DI-9204E Manuel utilisateur

GST

GST I-9405 Manuel utilisateur

GST

GST C-9403 Manuel utilisateur

GST

GST 8903 Manuel utilisateur

GST

GST DC-M9204F Manuel utilisateur

GST

GST DC-M9414 Series Instructions de montage

GST

GST I-9403 Manuel utilisateur

GST

GST I-9407 Manuel utilisateur

GST

GST GST200N Manuel utilisateur

GST

GST DI-9204E Manuel utilisateur

Manuels Système de sécurité populaires d'autres marques

Inner Range

Inner Range Concept 2000 Manuel utilisateur

Climax

Climax Mobile Lite R32 Instructions de montage

CADDX

CADDX NX-6 Manuel utilisateur

FBII

FBII XL-31 Series Manuel utilisateur

Johnson Controls

Johnson Controls PENN Connected PC10 Manuel utilisateur

Aeotec

Aeotec Siren Gen5 Manuel utilisateur

Blaupunkt

Blaupunkt SA 2700 Manuel utilisateur

IDEAL

IDEAL Accenta Manuel du propriétaire

AJAX

AJAX DoubleButton Manuel utilisateur

Swann

Swann SW-P-MC2 Manuel utilisateur

Ecolink

Ecolink Siren+Chime Manuel utilisateur

Digital Monitoring Products

Digital Monitoring Products XR150 Manuel utilisateur

EDM

EDM Solution 6+6 Wireless-AE Manuel utilisateur

Highway Safety Group

Highway Safety Group EA401 Manuel utilisateur

Siren

Siren LED GSM Manuel utilisateur

Detection Systems

Detection Systems 7090i Instructions de montage

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Manuel utilisateur

Siemens

Siemens FDM273 Manuel utilisateur