Grundig DTR 1560 MICRO Manuel utilisateur
ǵ
DIGITAL
TERRESTRIAL
RECEIVER
DTR 1560 MICRO
DEUTSCH
ENGLISH
FRANÇAIS
SVENSKA
SUOMI
ESPANOL
2
CONTENTS____________________________________________
4 General information
4 Packing contents
4 Receiving digital stations
4 Special features of your digital receiver
5 Set-up and safety
6-7 Overview
6 The digital receiver
6 The infrared receiver
7 The remote control
8-9 Connection and preparation
8 Connecting the antenna
8 Connecting the television
8 Connecting the infrared receiver
9 Connecting the mains adapter
9 Inserting batteries in the remote control
10-13 Basic settings
10 The menu
11-12 Searching for stations
13 Editing the station list
14-16 Basic functions
14 Switching on and off
14 Mode selection
14 Selecting preset channels
14 Using the options
15 Adjusting the volume
15 Muting the sound
15 Selecting stations from lists
15 Switching from the current station to the previous one
16 TV guide
17 Teletext mode
17 Teletext
17 Additional functions
ENGLISH
3
CONTENTS _________________________________________________
18-23 Settings
18-19 Picture settings
19-20 Language Settings
21-22 Menu settings
22-23 General settings
24-27 Additional functions
24 Automatic station search
25 Manual station search
26 Timer functions
27 Safety
28 Special settings
28 Resetting the receiver to its original state
28 Updating the digital receiver software
29-32 Information
29 Displaying station reception properties
29 Displaying device information
30 Technical data
30 Environmental note
31 Troubleshooting
32 Additional Information for units sold in the UK.
4
Packing contents
1DTR 1560 MICRO Digital Satellite Receiver
2Tele Pilot 765 S remote control
3Two batteries for the remote control (2 x 1.5 V, Mignon, e.g.
UM-3 or AA)
4Euro/AV (Scart) extension
5Mains adapter
6Infrared receiver
7Instruction Manual
Receiving digital stations
To use your new DTR 1560 MICRO digital receiver you need a
digital outdoor or indoor antenna.
Unlike analogue broadcasting, not every station has its own trans-
mission frequency. Instead, several stations are grouped into what
are known as bouquets on a regional or national level.
You can find the current transmission information on teletext from
various broadcasters, or look in a TV guide or on the Internet.
Special features of your digital receiver
The DTR 1560 MICRO digital receiver can receive and process
all unencrypted digital stations. This digital receiver has a built-in
digital receiver unit. The receiver unit converts the signals from
digital stations to provide outstanding audio and picture quality.
The TV guide tells you of any schedule changes at short notice, and
provides an overview of all the stations’ schedules for the next few
hours.
If the broadcaster provides it, you can call up detailed information
on each programme at the touch of a button.
This digital receiver has a very comprehensive, user-friendly menu
system.
The menu is displayed on the television screen, and the functions of
the remote control buttons are explained.
GENERAL INFORMATION__________________
ENGLISH
5
SET-UP AND SAFETY___________________________
To ensure that this high quality, easy-to-use digital receiver gives
you lasting entertainment and enjoyment, please note the following
information.
This digital receiver is designed to receive, record and play back
video and audio signals. Any other use is expressly prohibited.
When setting up the device, make sure the mains plug is easily
accessible.
If the digital receiver is subject to a sudden change in temperature,
for example when brought in from the cold to a warm room, let it
stand for at least two hours before you connect it to the mains
supply.
Do not expose the digital receiver to any moisture.
The digital receiver is designed for use in dry rooms. If you do use it
outdoors, please ensure that it is protected from moisture, such as
rain or splashing water.
Thunderstorms are a danger to all electrical devices. Even if the
digital receiver is switched off, it can be damaged by a
lightning strike to the mains or the antenna.
Always disconnect the mains and antenna plugs during a storm.
Never open the digital receiver casing under any circumstances.
Warranty claims are excluded for damage resulting from improper
handling.
Note:
Do not connect any other equipment while the device is switched
on. Switch off the other equipment as well before connecting it.
Only plug the device into the mains socket after you have connected
the external devices and the antenna.
°C2h
°C
R
L
AV1
AV2
TV R
6
The digital receiver
ÉÉSocket for the indoor or outdoor antenna.
IR remote Connection socket for the infrared receiver.
12 VDC, 6 W max. Connection socket for the mains adapter supplied.
EURO AV Euro AV (output) plug for the television.
The infrared receiver
The infrared receiver receives the infrared signals of the remote
control and forwards the commands by wire to the receiver. Position
the infrared receiver so that it can receive the remote control
commands.
When you switch on from standby, the receiver switches to the last
selected station (Last Station Memory).
•(red) The digital receiver is in standby mode.
•(green) The digital receiver is switched on.
OVERVIEW____________________________________________
ENGLISH
7
OVERVIEW_________________________________________________
The remote control
ǼSwitches the digital receiver to standby, and from
standby to the channel last selected.
?Displays programme information.
1 … 0 Select stations.
dSwitches the sound to mute and on again.
iOpens the main menu.
zExits the current menu level.
ǸAdjust the volume.
Ƿ
P+ Switch channels up and down one by one.
P-
OK Calls up the station list.
Press
A/B
to switch between the station list and the
favourites list.
TXT Switches from television mode to teletext mode.
TV-G Calls up the TV guide.
TV
Switches to TV mode.
A/B
Switches between the two most recently selected
channels.
RADIO Switches to radio mode.
ȄDisplays the time.
ǷǷSwitches between audio channels.
FCalls up options (not available for all stations).
AVR, TV Switches to operating a GRUNDIG AV receiver,
DVD GRUNDIG television or GRUNDIG DVD player.
Keep the appropriate button (»AVR«, »TV«, »DVD«)
pressed down. Then press the appropriate button.
Note:
The functions available depend on the model of the
device you are using.
Just try it out.
Tele Pilot 765 S
AVR DVD
TV
z
TXT
PIP
A/B
MHP
d
TV-G
Radio
TV
8
Connecting the antenna
1Connect the cable of the indoor or outdoor antenna to the »ÉÉ« socket on
the digital receiver.
Note:
When connecting an indoor antenna you may have to try it out at
different positions until you get the best reception.
Connecting the television
1Plug the digital receiver into the corresponding Euro AV socket (e.g.
EURO-AV, SCART) of the television (use the Euro AV extension if
required).
CONNECTION AND PREPARATION
R
L
AV1
AV2
TV R
TelePilot765S
AVR DVD
TV
z
TXT
PIP
A/B
MHP
d
TV-G
Radio
TV
R
L
AV1
AV2
ENGLISH
9
Connecting the infrared receiver
1Insert the plug of the infrared receiver into the »IR remote« socket.
Connecting the mains adapter
1Plug the plug of the mains adapter supplied into the »12 VDC« socket on
the digital receiver.
2Plug the mains adapter into the socket.
Notes:
Only plug the device into the mains socket after you have connected the
television and the antenna.
The only way to disconnect the digital receiver from the mains supply is
to pull the plug.
Inserting batteries in the remote control
1Open the battery compartment by removing the lid.
2Insert the batteries (Mignon type, for example UM-3 or AA, 2x 1.5 V).
Observe the polarity (marked on the base of the battery compartment).
3Close the battery compartment.
Note:
If the digital receiver no longer reacts properly to remote control com-
mands, the batteries may be flat. Always remove used batteries.
The manufacturer accepts no liability for damage resulting from leaking
batteries.
Environmental note
Batteries, including those which contain no heavy metal, should not be
disposed of with household waste. Please dispose of used batteries in an
environmentally responsible manner. Find out about the legal regula-
tions which apply in your area.
CONNECTION AND PREPARATION_________________
10
The menu
This digital receiver has a very comprehensive, user-friendly menu
system. The menu is displayed on the television screen.
The digital receiver responds to many functions which you select on
the remote control with informative menus and icons on the televi-
sion screen.
It enables you to select many different settings and contains infor-
mation on using your digital receiver.
The menu contains the most important controls for your digital
receiver. Its menu system controls the dialogue between you and the
digital receiver.
Press »i« to open the main menu. Press »P-« or »P+« to navigate in
the menu and select the desired symbol. The selected symbol is
highlighted.
When you press »OK« to confirm your selection, a sub-menu
appears. Here too, you can navigate by pressing »P-« or »P+«
and select the item you want. The selected item is highlighted.
Press »OK« to confirm. Normally another menu then appears,
where you can use »P-« or »P+« to navigate and make the setting.
Make settings using »P-«, »P+«, »Ǹ« or »Ƿ«.
Press »z« to quit the current menu level.
Press »i« to quit the menu entirely.
BASIC SETTINGS __________________________________
Table des matières
Autres manuels Grundig Récepteur
Grundig
Grundig Satellit 650 Manuel utilisateur
Grundig
Grundig DSR 6454 HD/CD Manuel utilisateur
Grundig
Grundig DCR 1744 CO Manuel utilisateur
Grundig
Grundig YACHT BOY 400 Manuel utilisateur
Grundig
Grundig GSTB 3100HD Manuel utilisateur
Grundig
Grundig STR 600 AP Manuel utilisateur
Grundig
Grundig HIGH FIDELITY R 2000 Manuel utilisateur
Grundig
Grundig DSR 1773 CY Manuel utilisateur
Grundig
Grundig DSR 1510 Manuel utilisateur
Grundig
Grundig DSR 2530 Manuel utilisateur
Grundig
Grundig XENARO AVR 4300 DD Manuel utilisateur
Grundig
Grundig STR 611 Manuel utilisateur
Grundig
Grundig DSR 4530 HDD Manuel utilisateur
Grundig
Grundig SER 300a Manuel utilisateur
Grundig
Grundig STR 8150 Manuel utilisateur
Grundig
Grundig DTR 2544 Manuel utilisateur
Grundig
Grundig DTR 5464 HD Manuel utilisateur
Grundig
Grundig DTR 1520 Manuel utilisateur
Grundig
Grundig STR 2300 FR Manuel utilisateur
Grundig
Grundig STR 7100 Manuel utilisateur
