Grundig DTR 1560-2 MICRO Manuel utilisateur
DIGITAL
SATELLITE RECEIVER
DTR 1560-2 MICRO
2
CONTENTS____________________________________________
4 General information
4 Packing contents
4 Receiving digital stations
4 Special features of your digital receiver
5 Set-up and safety
6-7 Overview
6 The digital receiver
6 The infrared receiver
7 The remote control
8-9 Connection and preparation
8 Connecting the antenna
8 Connecting the television
8 Connecting the infrared receiver
9 Connecting the mains adapter
9 Inserting batteries in the remote control
10-13 Upgrading the television
10 Connecting the GRUNDIG television with G2 chassis (Digi 200)
11 Installing on the GRUNDIG television set
12-13 Operating the GRUNDIG television remote control
14-17 Basic settings
14 The menu
15-16 Searching for stations
17 Editing the station list
18-20 Basic functions
18 Switching on and off
18 Mode selection
18 Selecting preset channels
18 Using the options
19 Adjusting the volume
19 Muting the sound
19 Selecting stations from lists
19 Switching from the current station to the previous one
20 TV guide
21 Teletext mode
21 Teletext
21 Additional functions
22-27 Settings
22-23 Picture settings
23-24 Language Settings
25-26 Menu settings
26-27 General settings
ENGLISH
3
CONTENTS____________________________________________
28-31 Additional functions
28 Automatic station search
29 Manual station search
30 Timer functions
31 Safety
32-33 Special settings
32 Resetting the receiver to its original state
32 Updating the digital receiver software
33 Changing remote control levels
34-37 Information
34 Displaying station reception properties
34 Displaying device information
35 Technical data
35 Environmental note
36 Troubleshooting
37 Additional Information for units sold in the UK.
4
Packing contents
1DTR 1560-2 MICRO Digital Satellite Receiver
2Tele Pilot 766 S remote control
3Two batteries for the remote control (2 x 1.5 V, Mignon, e.g.
UM-3 or AA)
4Euro/AV (Scart) extension
5Mains adapter
6Infrared receiver
7Instruction Manual
Receiving digital stations
To use your new DTR 1560-2 MICRO digital receiver you need a
digital outdoor or indoor antenna.
Unlike analogue broadcasting, not every station has its own trans-
mission frequency. Instead, several stations are grouped into what
are known as bouquets on a regional or national level.
You can find the current transmission information on teletext from
various broadcasters, or look in a TV guide or on the Internet.
Special features of your digital receiver
The DTR 1560-2 MICRO digital receiver can receive and process
all unencrypted digital stations. This digital receiver has a built-in
digital receiver unit. The receiver unit converts the signals from
digital stations to provide outstanding audio and picture quality.
The TV guide tells you of any schedule changes at short notice, and
provides an overview of all the stations’ schedules for the next few
hours.
If the broadcaster provides it, you can call up detailed information
on each programme at the touch of a button.
This digital receiver has a very comprehensive, user-friendly menu
system.
The menu is displayed on the television screen, and the functions of
the remote control buttons are explained.
This receiver is prepared with the Digi 200 chassis for upgrading
GRUNDIG televisions.
The user guide for the receiver can be integrated into the television
user guide by following a brief installation procedure. The receiver
can be controlled with the television remote control once it is
installed. The remote control, the infra-red mouse and the power
supply for the receiver will then no longer be needed.
GENERAL INFORMATION__________________
ENGLISH
5
SET-UP AND SAFETY___________________________
To ensure that this high quality, easy-to-use digital receiver gives
you lasting entertainment and enjoyment, please note the following
information.
This digital receiver is designed to receive, record and play back
video and audio signals. Any other use is expressly prohibited.
When setting up the device, make sure the mains plug is easily
accessible.
If the digital receiver is subject to a sudden change in temperature,
for example when brought in from the cold to a warm room, let it
stand for at least two hours before you connect it to the mains
supply.
Do not expose the digital receiver to any moisture.
The digital receiver is designed for use in dry rooms. If you do use it
outdoors, please ensure that it is protected from moisture, such as
rain or splashing water.
Thunderstorms are a danger to all electrical devices. Even if the
digital receiver is switched off, it can be damaged by a
lightning strike to the mains or the antenna.
Always disconnect the mains and antenna plugs during a storm.
Never open the digital receiver casing under any circumstances.
Warranty claims are excluded for damage resulting from improper
handling.
Note:
Do not connect any other equipment while the device is switched
on. Switch off the other equipment as well before connecting it.
Only plug the device into the mains socket after you have connected
the external devices and the antenna.
°C2h
°C
R
L
AV1
AV2
TV R
6
The digital receiver
ÉÉSocket for the indoor or outdoor antenna.
IR remote Connection socket for the infrared receiver.
12 VDC, 6 W max. Connection socket for the mains adapter supplied.
EURO AV Euro AV (output) plug for the television.
The infrared receiver
The infrared receiver receives the infrared signals of the remote
control and forwards the commands by wire to the receiver. Position
the infrared receiver so that it can receive the remote control
commands.
When you switch on from standby, the receiver switches to the last
selected station (Last Station Memory).
•(red) The digital receiver is in standby mode.
•(green) The digital receiver is switched on.
OVERVIEW____________________________________________
ENGLISH
7
OVERVIEW____________________________________________
The remote control
ǼSwitches the digital receiver to standby, and from
standby to the channel last selected.
?Displays programme information.
1 … 0 Select stations.
dSwitches the sound to mute and on again.
iOpens the main menu.
zExits the current menu level.
ǸAdjust the volume.
Ƿ
P+ Switch channels up and down one by one.
P-
OK Calls up the station list.
Press
A/B
to switch between the station list and the
favourites list.
TXT Switches from television mode to teletext mode.
TV-G Calls up the TV guide.
TV
Switches to TV mode.
A/B
Switches between the two most recently selected
channels.
RADIO Switches to radio mode.
ȄDisplays the time.
ǷǷSwitches between audio channels.
FCalls up options (not available for all stations).
DR, TV Switches to operating a GRUNDIG digital receiver,
DVD GRUNDIG television or GRUNDIG DVD player.
Keep the appropriate button (»DR«, »TV«, »DVD«)
pressed down. Then press the appropriate button.
Note:
The functions available depend on the model of the
device you are using.
Just try it out.
Tele Pilot 766 S
DR DVD
TV
z
TXT
PIP
A/B
MHP
d
TV-G
Radio
TV
8
Connecting the antenna
1Connect the cable of the indoor or outdoor antenna to the »ÉÉ« socket on
the digital receiver.
Note:
When connecting an indoor antenna you may have to try it out at
different positions until you get the best reception.
Connecting the television
1Plug the digital receiver into the corresponding Euro AV socket (e.g.
EURO-AV, SCART) of the television (use the Euro AV extension if
required).
CONNECTION AND PREPARATION
R
L
AV1
AV2
TV R
TelePilot765S
AVR DVD
TV
z
TXT
PIP
A/B
MHP
d
TV-G
Radio
TV
R
L
AV1
AV2
ENGLISH
9
Connecting the infrared receiver
1Insert the plug of the infrared receiver into the »IR remote« socket.
Connecting the mains adapter
1Plug the plug of the mains adapter supplied into the »12 VDC« socket on
the digital receiver.
2Plug the mains adapter into the socket.
Notes:
Only plug the device into the mains socket after you have connected the
television and the antenna.
The only way to disconnect the digital receiver from the mains supply is
to pull the plug.
Inserting batteries in the remote control
1Open the battery compartment by removing the lid.
2Insert the batteries (Mignon type, for example UM-3 or AA, 2x 1.5 V).
Observe the polarity (marked on the base of the battery compartment).
3Close the battery compartment.
Note:
If the digital receiver no longer reacts properly to remote control com-
mands, the batteries may be flat. Always remove used batteries.
The manufacturer accepts no liability for damage resulting from leaking
batteries.
Environmental note
Batteries, including those which contain no heavy metal, should not be
disposed of with household waste. Please dispose of used batteries in an
environmentally responsible manner. Find out about the legal regula-
tions which apply in your area.
CONNECTION AND PREPARATION
10
Connecting the GRUNDIG television with
G2 chassis (Digi 200)
You can fit a television with G2 chassis (Digi 200) with this digital
receiver as of software version “Ver SG21603-010 xxxxxx”.
“xxxxxx” stands for the date the software was created. The date is
not important for the compatibility. You can display the software
version of the television when »EASY DIALOG« is showing (main
menu), by pressing the green button.
Connecting the communication line to the receiver
1Plug the communication line into the »IR remote« and
»12 VDC« sockets.
Note:
The communication line is supplied with the appropriate tele-
vision.
Connecting the communication line to the
television
1Plug the communication line into the »SERVICE G-BUS«
socket on the television.
Note:
The remote control, the infra-red mouse and the power supply
for the receiver will then no longer be needed.
UPGRADING THE TELEVISION__________
DVI-I HDMI SERVICE
G-BUS
12 VDC, 18 W max.
Table des matières
Autres manuels Grundig Récepteur
Grundig
Grundig SER 300a Manuel utilisateur
Grundig
Grundig STR 600 AP Manuel utilisateur
Grundig
Grundig WR 5408 PLL Manuel utilisateur
Grundig
Grundig STR 7100 Manuel utilisateur
Grundig
Grundig DRS 100 CL Manuel utilisateur
Grundig
Grundig STR 632 Manuel utilisateur
Grundig
Grundig Satellit 700 Manuel utilisateur
Grundig
Grundig STR 400 AP Manuel utilisateur
Grundig
Grundig XENARO AVR 4300 DD Manuel utilisateur
Grundig
Grundig STR 6122 TWIN Manuel utilisateur
Grundig
Grundig 400 PE Manuel utilisateur
Grundig
Grundig STR 622 TWIN Manuel utilisateur
Grundig
Grundig V21 Manuel utilisateur
Grundig
Grundig STR 7122 TWIN Manuel utilisateur
Grundig
Grundig R 1000 DPL Manuel utilisateur
Grundig
Grundig DTR 5464 HD Manuel utilisateur
Grundig
Grundig 100 PE Manuel utilisateur
Grundig
Grundig CINIO AVR 5200 DD GLO0150 Manuel utilisateur
Grundig
Grundig YB-P 2000 Manuel utilisateur
Grundig
Grundig STR 7100 FR Manuel utilisateur
