Grundig SQUIXX CDP 4100 Manuel utilisateur

PORTABLE CD-PLAYER

Squixx

CDP 4100

CDP 4101 AS10

CDP 4102 AS40

4 Sicherheit 10 Zusatz-Funktionen

5 Auf einen Blick 11 Musikprogramm erstellen

7 Stromversorgung 12 Informationen

8 Vorbereiten 107 Service

9 Grundfunktionen

14 Safety 20 Additional functions

15 Overview 21 Creating a track memory

17 Power supply 22 Information

18 Preparation 107 Service

19 Basic functions

24 Sécurité 30 Fonctions supplémentaires

25 Vue d’ensemble 31 Création d’un programme

27 Alimentation en courant musical

28 Préparatifs 32 Informations

29 Fonctions de base 107 Service après-vente

34 Sicurezza 40 Funzioni supplementari

35 In breve 41 Creazione del programma

37 Alimentazione elettrica di musica

38 Preparazione 42 Informazioni

39 Funzioni di base 107 Assistenza

44 Segurança 50 Funções adicionais

45 Vista geral 51 Criar um programa de

47 Alimentação de corrente música

48 Preparação 52 Informações

49 Funções básicas 107 Assistência a clientes

___________________________________________________________________

DEUTSCH

ENGLISH

FRANÇAIS

ITALIANO

PORTUGUÊS

54 Seguridad 60 Funciones adicionales

55 Vista general 61 Crear un programa

57 Alimentación de corriente musical

58 Preprativos 62 Información

59 Funciones básicas 107 Servicio

64 Veiligheid 70 Extra functies

65 In een oogopslag 71 Muziekprogramma

67 Stroomtoevoer 72 Informatie

68 Voorbereiden 107 Service

69 Basisfuncties

74 Sikkerhed 80 Ekstra funktioner

75 Kort oversigt 81 Oprettelse af

77 Strømforsyning musikprogram

78 Forberedelse 82 Informationer

79 Grundfunktioner 107 Service

84 Säkerhet 90 Extrafunktioner

85 En överblick 91 Skapa musikprogram

87 Strömförsörjning 92 Information

88 Förberedelser 107 Service

89 Grundfunktioner

94 Turvallisuus 100 Lisätoiminnot

95 Yleiskatsaus 101 Musiikkiohjelman

97 Virransyöttö laatiminen

98 Valmistelu 102 Tietoja

99 Perustoiminnot 107 Service

DEUTSCH

__________________________________________________________________

ESPAÑOL

NEDERLANDS

DANSK

SVENSKA

SUOMI

Safety

To ensure that this device provides you with long-term satisfaction and

enjoyment, please observe the following instructions:

This device is designed for the playback of audio signals.

Any other use is expressly prohibited.

You must make sure that the device is protected from moisture such as rain

or water splashes.

When deciding where to place the device, please note that furniture surfaces

are covered by various types of varnish and plastic, most of which contain

chemical additives. These additives can corrode the device supports, leaving

residues on the furniture surfaces which can be difficult or impossible to

remove.

Never touch the lens on the device.

The device contains self-lubricating bearings, which must not be oiled or

greased.

Condensation may form on the lens if the device is taken into a warm room

from the cold. This prevents it from playing a CD.

Always keep the disc compartment closed to prevent dust from collecting on

the lens.

Never open the device casing. The manufacturer accepts no liability for

damage resulting from improper handling.

Maintenance

If the device is unable to scan CDs perfectly, use a standard commercially

available cleaning CD to clean the laser optics. Other cleaning methods may

damage the laser optics.

To clean a CD, breathe on it and wipe it with a soft, lint-free cloth from the

middle towards the edge.

Clean the device with a clean, moist leather cloth. Do not use cleaning

agents, as these may damage the casing or the CD.

Environmental note

As little material as possible was used for packaging your device.

It can be divided into two separate materials: cardboard (box) and polyeth-

ylene (bag).

Please observe the local regulations for disposing of the packing material.

Batteries, including those which are heavy metal-free, may not be disposed of

with household waste. Please dispose of used batteries in an environmentally

sound manner. Find out about the legal regulations which apply in your area.

SAFETY___________________________________________________

°C

! SERVICE !! SERVICE !! SERVICE !

ENGLISH

Operating controls on the top of the device

DAS Switches the digital anti-shock system on and off

(no function on the CDP 4100).

STOP 5Press once to end CD playback

Press twice to switch off the device

sss6F.SKIP Press briefly to select the next track

Hold down to search for a particular passage

ıPLAY/PAUSE II Switches the device on and starts CD playback;

Switches to pause.

5aaaR.SKIP Press briefly to select the previous track

Hold down to search for a particular passage

PROG. Calls up the track memory creation function

MODE Call up the Repeat 1, Repeat All, Intro and Ran-

dom functions in succession

OVERVIEW ___________________________________________

MODE DAS

STOP 5

F SKIP 9

RPLAY/PAUSE $

PROG

8R SKIP

Controls and connections on the side

DC IN 4.5 V +>- External power supply socket (4.5 V)

LINE OUT Audio signal output for CD playback via a

HiFi system

VOLUME gAdjusts the volume

PHONES Socket for the earphones supplied

(3.5 mm-jack)

ON UBS OFF Bass booster

OPEN Opens the CD compartment

OFF HOLD ON Disables and enables the buttons

The display

t1: Repeating a single track

tALL: Repeating all tracks on the CD

HOLD: The buttons are disabled

i: Flashing means the batteries are becoming low

PROG: Creating or playing a track memory

RAND: The Random function has been selected

INTRO: The Intro function has been selected

u: The anti-shock system in on (no display on the CDP 4100).

»01«: Track number

»00:02«: Track playing time

OVERVIEW ____________________________________________

t1 ALL HOLD i

PROG RAND INTRO u

88 88

88 :

UBS IIIIIIIROPEN

ON OFF

LOCK

OFF ON

PHONES

VOLUME ß

LINE OUT

DC IN 4.5V

ENGLISH

Mains operation (with mains adapter)

Note:

Check if the mains voltage on the mains adapter type plate corresponds

to your local mains supply.

The only way to disconnect the device from the mains supply is to

unplug the adapter. Only unplug the mains adapter from the socket

when you are not using the device.

1Plug the mains adapter cable into the »DC IN 4.5V« socket on the

device.

2Plug the mains adapter into the mains socket.

Battery operation

1Pull out the mains adapter cable, open the cover of the battery compart-

ment on the bottom of the device.

2Insert two batteries, observing the polarity on the bottom of the battery

compartment (Mignon type, e.g. 2x1.5V, LR6, AM3; AA).

Note:

The device display tells you about the state of the batteries.

If » i« flashes in the display, the batteries are getting low.

Remove the batteries when they are flat or when you know that the

device will not be used for a long period of time. No liability is accepted

for damage resulting from leaking batteries.

The batteries are switched off during mains operation.

Using Nickel-Cadmium batteries

When using Nickel-Cadmium batteries (NiCd, size AA 1.2 V/600mAh) use

the mains adapter as a charger.

1Open the cover of the battery compartment on the bottom of the device.

2Insert two batteries, observing the polarity marked on the bottom of the

battery compartment.

3Plug the mains adapter into the »DC IN 4.5V« socket on the device

and plug the mains adapter into the mains socket.

Note:

When buying NiCd batteries, always make sure that approximately 3

mm of the metal end at the negative pole is visible (see illustration). If

necessary, use a knife to remove the insulation.

Completely charge up the batteries before you first use them or if you

have not used them for a long time.

The charging time is approximately 12 hours.

Using the device while the batteries are charging increases the charging

time.

POWER SUPPLY___________________________________

DC IN 4.5V

3 mm

min

Connecting the earphones.

1Connect the earphones to the »PHONES« socket (ø 3.5 mm).

Note:

Excessive volume can be dangerous to yourself and other road users.

Listen at a volume which still allows you to hear outside noises such as

horns, emergency vehicles and police cars.

This portable CD player with headphones meets the requirements set out

in Articles LL44.5 and 6 of the German safety regulations.

The output of the device guarantees the best possible sound at medium

volume. Prolonged listening at loud volumes can damage your hearing.

Adjusting the volume

1Adjust the volume using » VOLUME g«.

Ultra Bass System

1Press » UBS« on the device to switch the Ultra Bass system on and off.

Inserting a CD

The device is suitable for music CDs displaying the logo shown here or for

CD-Rs with audio data.

As well as standard 12 cm CDs, it can also play

8 cm CDs without an

adapter.

Do not attach adhesive labels to CDs.

Keep the surfaces of CDs clean.

1Push the »OPEN« slider to the right and open the CD compartment.

2Insert the CD with the label facing upwards and gently push the centre

of the CD to latch it into place.

3Close the CD compartment.

Removing the CD

Note:

Press »STOP ■« before you open the CD compartment.

1Push the »OPEN« slider to the right and open the CD compartment.

2Remove the CD.

3Close the CD compartment.

PREPARATION______________________________________

ENGLISH

Digital anti-shock system (DAS) (no function on the CDP 4100)

The anti-shock system reads the data on the CD several seconds in advance

(10 seconds with CDP 4101 AS10, 40 seconds with CDP 4102 AS40). This

prevents interruptions to playback due to shocks and vibrations.

1Press »DAS« to switch on the anti-shock system.

– Display: »z« and shortly afterwards »u«.

Note:

When you switch the anti-shock system on or off, playback is delayed or

briefly interrupted.

Since the anti-shock system requires more power, it is advisable to

switch off the function as long as there are no problems with playback,

in order to prolong the life of the batteries.

2Press »DAS« to switch off the anti-shock system.

CD playback

1Press » ıPLAY/PAUSE II« to start playback.

– Display: »10 SEC« (or »40 SEC«), then the number of tracks and

total CD playing time (for example »15 57:i5«) followed by the first

track and the playing time of that track.

– Playback begins with the first track.

2To pause playback, press » ıPLAY/PAUSE II«.

– The track playing time flashes.

Press » ıPLAY/PAUSE II« to resume playback.

3Press »STOP ■« to end playback.

Note:

Playback stops automatically when the end of the CD is reached, if the

CD compartment is opened or if the batteries run out.

4To switch off the device, press »STOP ■« again.

Note:

The device switches off automatically after the end of playback if you do

not press a button within 30 seconds.

Selecting a different track

1During playback, keep pressing »5a R.SKIP« or »F.SKIPs6« until

the number of the track you want to hear appears in the display.

– Playback of the selected track starts automatically.

Searching for a passage within a track

1During playback, press »5a R.SKIP« or »F.SKIPs6« and hold it

down until you find the passage you want to hear.

– The volume is turned down during the search.

BASIC FUNCTIONS______________________________

SEC

00 I5

0I :

00 0 I

0I :

00 00

02 :

0I35

02 :

57 I5

I5 :

Repeating a track

1Press »MODE« once during playback.

– Display: »t1« and the track is repeated.

2To quit this function, press »STOP ■«.

Repeating the whole CD (

REPEAT

)

1Press »MODE« twice during playback.

– Display: »tALL«, and the CD is repeated from the beginning.

2To quit this function, press »STOP ■«.

Playing the introductions of tracks on the CD

1Press »MODE« three times during playback.

– Display: »INTRO« flashes.

2Press » ıPLAY/PAUSE II« to start the function.

– Display: »INTRO« and the first ten seconds of each track are played.

3To play back the whole of the current track, press » ıPLAY/

PAUSE II«.

– »INTRO« disappears from the display.

Playing back tracks in random order

1Press »MODE« four times during playback.

– Display: »RAND« flashes.

2Press » ıPLAY/PAUSE II« to start the function.

– Display: »RAND« and the titles on the CD are played back in random

order.

3Press »STOP ■« to quit the function.

– »RAND« disappears from the display

Note:

You cannot select this function if the tracks are being played back in a

set sequence from the memory.

Disabling the buttons on the device

You can use this function to prevent the buttons from being accidentally

pressed (for example when travelling).

1Push the »HOLD« slider to the »ON« position.

– Display: »HOLD«, all the buttons are disabled.

Note:

The device cannot be switched on. Display: »HOLD«.

2Push the »HOLD« slider to the »OFF« position to enable the buttons.

– Display: »HOLD« disappears.

ADDITIONAL FUNCTIONS _________________

00 0 I

0I :

tALL

00 0 I

0I :

INTRO u

00 0 I

0I :

RAND u

00 0 I

0I :

HOLD

00 I5

03 :

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Grundig Lecteur CD

Grundig

Grundig SQUIXX CDP 4200 AS 45 Manuel utilisateur

Grundig

Grundig CDP 110 Manuel utilisateur

Grundig

Grundig CDP 200 Manuel utilisateur

Grundig

Grundig K-RCD 120 Manuel utilisateur

Grundig

Grundig Planixx CDP 4103 AS10 Manuel utilisateur

Grundig

Grundig CDC 477 Manuel utilisateur

Grundig

Grundig CDP-S 250 Manuel utilisateur

Grundig

Grundig Mystixx CDP 9400 SPCD Manuel utilisateur

Grundig

Grundig RR 420 CD Manuel utilisateur

Grundig

Grundig RCD 1420 MP3 Manuel technique

Grundig

Grundig CDP 9100 SPCD Mystixx Manuel utilisateur

Grundig

Grundig FREAXX 30 RRCD 4203 PLL Manuel utilisateur

Grundig

Grundig RR 440 CD Manuel utilisateur

Grundig

Grundig K-CDP 65 Manuel utilisateur

Grundig

Grundig CDP 200 Manuel utilisateur

Grundig

Grundig CDP 5100 SPCD Manuel technique

Grundig

Grundig Mystixx CDP 9200 SPCD Manuel utilisateur

Grundig

Grundig MCD 40 Manuel utilisateur

Grundig

Grundig CDP 110 Manuel utilisateur

Grundig

Grundig RR 300 CD Manuel utilisateur

Grundig

Grundig CDP 75 Manuel utilisateur

Grundig

Grundig CDP 75 Manuel utilisateur

Grundig

Grundig CDP 410 Manuel utilisateur

Grundig

Grundig RRCD 3760 WEB Manuel utilisateur

Manuels Lecteur CD populaires d'autres marques

RCA

RCA RP-7923 Manuel utilisateur

Pioneer

Pioneer DEH-P3550MP XM Manuel utilisateur

Philips

Philips AZ1207 Manuel utilisateur

Philips

Philips CD582 Manuel utilisateur

Philips

Philips AZ 6821 Manuel utilisateur

Lasonic

Lasonic MSU-2020 Manuel utilisateur

THOMSON

THOMSON RCD150 Manuel utilisateur

Denon

Denon DCD-1420 Manuel utilisateur

Panasonic

Panasonic SJ-MR100 Manuel utilisateur

Onkyo

Onkyo DX-7210 Manuel utilisateur

Sony

Sony MZ-R3 Manuel utilisateur

Denon

Denon DVM-4800 Manuel utilisateur

JBL

JBL MR-32 Manuel utilisateur

RCA

RCA RCD152 Manuel utilisateur

Technics

Technics SL-PS770A Manuel utilisateur

Clarion

Clarion compact disc Manuel utilisateur

Sony

Sony MZ-M10 Manuel utilisateur

Philips

Philips Expanium AZ 1538 Manuel utilisateur