Groz MTB-12 Manuel utilisateur

INSTRUCTION MANUAL

S3190, REV A

MTB-12

12 Drawer

Portable Workstation

CAT NR. DESCRIPTION

MTB/12/WD 12 Drawer Portable Workstation

SPECIFICATIONS

DOUBLE WALL

CONSTRUCTION

BALL

BEARING

TROLLEY LOAD

CAPACITY

450

AVG. DRAWER

LOAD CAPACITY

45 KG

Depth (D)

Height (H)

Width (W)

Double wall heavy

gauge construction

provides high

durability & strength.

Heavy duty 5" × 2"

casters feature 2 ﬁxed

and 2 swivel with toe

lock ensures safety

and better mobility.

Elliptical tube side

handle with chrome

plating for easy

movement of cabinet.

Wooden top can be

used as a workbench.

Wooden top

for on site work

application

Single operation

locking system

Heavy Duty

Side Handle

Self locking ball

bearing drawer slides

Double wall steel

construction

Casters feature

2 ﬁxed and

2 swivel with

toe lock

OVERALL DIMENSIONS (W X D X H) 42" ×18" ×39"

(1053 mm ×461 mm ×1000 mm)

CASTER SIZE (DIAMETER X WIDTH) 5" ×2"

OVERALL WEIGHT OF TROLLEY 87 Kg

CABINET TOP Wooden Top (18 mm)

SAFETY INFORMATION

• Keep the work area clean and dry. Damp

or wet work areas can result in injury.

• When not in use, workstation should be

stored in a dry location to inhibit rust.

• Do not modify this workstation, and do

not use this workstation for a purpose for

which it was not intended.

• Check for damaged parts. Before using

this product, carefully check that it will

operate properly and perform its intended

function. Replace damaged or worn parts

immediately.

WARNING!

• Read and understand all instructions.

Failure to follow all instructions listed

above may result in serious injury.

PACKAGE CONTENT

DESCRIPTION QTY.

12 Drawer Workstation 1

Side handle 1

Bolt & washer set (Size 10 mm) 4

Fixed Caster 2

Swivel Caster with toe lock 2

Bolt & washer set (Size 13 mm) 16

O.I.P.M. 1

TOOLS NEEDED

• 10 mm spanner

• 13 mm spanner / 1/2" spanner

BEFORE INSTALLATION

• Check that the product has not suered

any damage during transport or storage.

• Keep the workstation away from heat and

sharp edges.

INSTALLATION

1. Put the workstation up-side down on the

ﬂoor and attach the 4 castors on the base

of workstation using bolt & washer sets

(Size 13 mm)

Note: Swivel caster with toe lock should

be mounted on the same side as the

handle.

2. Now keep the workstation upright. Insert the

side handle into the cabinet wall and attach

with bolt & washer sets (Size 10 mm).

Note: The side handle should be mounted

on the same side as the swivel caster with

toe lock.

3. The workstation is ready to use.

4. To remove a drawer with roller slides, pull

the drawer completely out. Press down

the left tab and lift up the right tab on the

sliders, pull drawer o slides.

5. To reinstall the drawer, realign it with the

internal drawer slide and push in until locked

in place.

OPERATING INSTRUCTIONS

• To avoid tipping, open one drawer at a time.

• Close all drawers when moving the unit.

• Every workstation has a unique number written

on its lock. Only the key with that number can

be used to lock or unlock the drawers.

• Close all drawers before locking. If a drawer is

not locked, unlock the unit and push drawer

to the closed position and then lock the unit

again.

MAINTENANCE

Periodically lubricate casters and tighten all

hardware

DISPOSAL

The components or the used product must be

given to companies that specialize in the disposal

and recycling of industrial waste.

Groz Engineering Tools (P) Ltd.

Groz Net Industries

Village Kherki Daula, National Highway-8,

Gurugram-122001, Haryana, INDIA

Tel +91.124.282.7734/40, 2827777

Fax +91.124.2827980, 2827986

E-Mail info@groz-tools.com

Url www.groz-tools.com

The GROZ name, GROZ logo and the mark are

trademarks of GROZ Engineering Tools (P) Ltd., India

GROZ WARRANTY POLICY

GROZ makes all eorts to ensure that its products meet the highest standards of quality and durability and warrants to the original purchaser its

range of products for a period of 12 months from GROZ Invoice date, against defects in materials and workmanship. If the GROZ product is part of

a set, only the portion that is defective is subject to this warranty.

This warranty does not apply to damage due directly or indirectly, to misuse, abuse, wear and tear, negligence or accident, repairs or alterations

outside GROZ plants, or to lack of maintenance. GROZ shall in no event be liable for death, injuries to persons or property or for incidental,

contingent, special or consequential damages arising from the use of its products. It is upto the user to determine suitability and safety of the

product for their intended use, and the user assumes all risks and liability herewith.

In no event, shall GROZ’s liability exceed the invoiced cost of the product In case of identiﬁcation of defect covered under this warranty, the same

must be notiﬁed in writing to GROZ /GROZ designated authorized service location. Proof of purchase date must accompany the complaint. GROZ

reserves the right to call back the faulty unit, all charges including transportation prepaid. On veriﬁcation of the defect, the unit will be repaired or

replaced with a new or reconditioned product or part of equal utility or a full refund given at GROZ’s discretion. The repaired /replaced units will be