Grizzly H3123 Manuel utilisateur
COPYRIGHT © JULY, 2003 BY GRIZZLY INDUSTRIAL, INC.
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
#505203624 PRINTED IN JAPAN
ONLINE MANUAL DISCLAIMER
THE INFORMATION IN THIS MANUAL REPRESENTS THE CONFIGURATION OF THE MACHINE AS IT IS CURRENTLY BEING SHIPPED. THE MACHINE
CONFIGURATION CAN CHANGE AS PRODUCT IMPROVEMENTS ARE INCORPORATED. IF YOU OWN AN EARLIER VERSION OF THE MACHINE, THIS
MANUAL MAY NOT EXACTLY DEPICT YOUR MACHINE . CONTACT CUSTOMER SERVICE IF YOU HAVE ANY QUESTIONS ABOUT DIFFERENCES. PRE-
VIOUS VERSIONS ARE NOT AVAILABLE ONLINE.
ELECTRIC GUITAR
MODEL H3123
INSTRUCTION MANUAL
WARNING
Some dust created by power sanding, sawing, grind-
ing, drilling, and other construction activities contains
chemicals known to the State of California to cause
cancer, birth defects or other reproductive harm.
Some examples of these chemicals are:
• Lead from lead-based paints.
• Crystalline silica from bricks, cement, and
other masonry products.
• Arsenic and chromium from chemically treated
lumber.
Your risk from these exposures varies, depending on
how often you do this type of work. To reduce your
exposure to these chemicals: work in a well ventilated
area, and work with approved safety equipment, such
as those dust masks that are specially designed to fil-
ter out microscopic particles.
SECTION 1: SAFETY........................................................................................................................2
SECTION 2: INTRODUCTION ..........................................................................................................3
SECTION 3: PARTS INVENTORY....................................................................................................4
SECTION 4: SANDING/FINISHING ..................................................................................................8
Supplies/Tools ............................................................................................................................8
Guitar Body ................................................................................................................................8
Neck ............................................................................................................................................9
Masking Tape Areas ..................................................................................................................9
Painting/Finishing......................................................................................................................10
SECTION 5: HARDWARE ..............................................................................................................11
Tuning Machines ......................................................................................................................11
Neck to Body ............................................................................................................................11
Pick Guard ................................................................................................................................12
Tremolo Bridge..........................................................................................................................13
Strap Button ..............................................................................................................................15
Audio Jack ................................................................................................................................16
Winding Strings ........................................................................................................................16
String Retainers ........................................................................................................................17
Mounting Back Plate ................................................................................................................18
Mounting Pick Guard ................................................................................................................18
SECTION 6: FINAL SET UP ..........................................................................................................19
Neck Adjustment ......................................................................................................................19
String Height ............................................................................................................................19
Pick Up Height ..........................................................................................................................21
Tremolo Arm ............................................................................................................................22
Tuning ......................................................................................................................................22
SECTION 7: REFERENCE INFO ....................................................................................................24
General......................................................................................................................................24
Aftermarket Accessories ..........................................................................................................24
Warranty & Returns ..................................................................................................................26
TABLE OF CONTENTS
-2- H3123 Electric Guitar Kit
SECTION 1: SAFETY
These instructions assume that you are intimately familiar with the safe operation and use of
woodworking machinery and woodworking tools, and understand the techniques used to repro-
duce this project. If you do not qualify for both of these criteria, STOP building this project for
your own safety. Read and understand the owners manual for the machinery you intend to use,
take a woodworking class or visit your local library for more information. Woodworking machinery
and tools are inherently dangerous because they use sharp edges that can and will cause serious
personal injury including amputation and death. Do not underestimate the ability of these tools and
machinery to cause injury. Never operate any tool without all guards in place and always wear
approved safety glasses. For your own safety, please heed this warning.
Always wear safety glasses or goggles when operating equipment. Everyday glasses or
reading glasses are not safety glasses. Be certain the safety glasses you wear meet the
appropriate standards of the American National Standards Institute (ANSI).
Because there are various ways to cut and join wood, you can make substitutions for the meth-
ods stated in this plan. We try to suggest the easiest methods possible. However, only you know
your skills with each piece of machinery. Never compromise your safety by using a cutting method
with which you are not comfortable. Instead, find an alternative approach that will yield the same
result.
H3123 Electric Guitar Kit -3-
We are proud to offer the Model H3123 Electric
Guitar Kit. This kit is part of a growing Grizzly
family of fine woodworking products. When
assembled according to the guidelines set forth in
this manual, you can expect years of enjoyment
from this guitar.
We are pleased to provide this manual with the
Model H3123. It was written to guide you through
assembly, review safety considerations, and
cover general information. It represents our effort
to produce the best documentation possible.
If you have any comments regarding this manual,
please write to us at the address below:
Grizzly Industrial, Inc.
C/O Technical Documentation
P.O. Box 2069
Bellingham, WA 98227-2069
Most importantly, we stand behind our products.
If you have any questions or parts requests,
please call or write us at the location listed below.
Grizzly Industrial, Inc.
1203 Lycoming Mall Circle
Muncy, PA 17756
Phone: (570) 546-9663
Fax: (800) 438-5901
E-Mail: [email protected]
Web Site: http://www.grizzly.com
The specifications, drawings, and photographs
illustrated in this manual represent the Model
H3123 as supplied when the manual was pre-
pared. However, owing to Grizzly’s policy of con-
tinuous improvement, changes may be made at
any time with no obligation on the part of Grizzly.
For your convenience, we always keep current
Grizzly manuals available on our website at
www.grizzly.com. Any updates to products will be
reflected in these manuals as soon as they are
complete. Visit our site often to check for the lat-
est updates to this manual!
SECTION 2: INTRODUCTION
-4- H3123 Electric Guitar Kit
SECTION 3: PARTS INVENTORY
Bag 1 QTY
1. Silver Neckplate 1
2. Black Neckplate Setter 1
3. Audio Output Jack 1
Boxed Components QTY
1. Guitar Body 1
2. Guitar Neck 1
3. Pickguard 1
Figure 1. Boxed components. Figure 2. Bag 1 components.
1
2
3
1
2
3
H3123 Electric Guitar Kit -5-
Bag 3 QTY
1. String Set 1
2. String Guides 2
3. String Guide Risers 2
4. #2 x 3⁄8" Pan Head Screw 2
Bag 2 QTY
1. Tuning Machines 6
2. Bushings 6
3. #1 x 5⁄32" Pan Head Screw 12
Figure 3. Bag 2 components. Figure 4. Bag 3 components.
1
2
3
1
2
3
4
-6- H3123 Electric Guitar Kit
Bag 5 QTY
Audio Patch Cable 1
Bag 4 QTY
Tremolo Bridge 1
Figure 5. Tremolo bridge. Figure 6. Audio patch cable.
H3123 Electric Guitar Kit -7-
Bag 7 QTY
1. Springs 4
2. Spring Hanger 1
3. Strap Buttons 2
4. String Nut 1
5. #4 x 3⁄8" Flat Head Screws 20
6. #10 x 13⁄4" Flat Head Screws 4
7. #7 x 11⁄2" Flat Head Screws 2
8. #4 1 " Pan Head Screws 6
9. Back Plate 1
Bag 6 QTY
1. Tremolo Arm 1
2. 5mm Allen Wrench 1
3. 1.5mm Allen Wrench 1
Figure 7. Bag 6 components. Figure 8. Bag 7 components.
1
2
3
12
3
45
6
7
8
9
-8- H3123 Electric Guitar Kit
The majority of the wooden components in this kit
are fully machined from the factory and are ready
for assembly. A small amount of drilling, sanding
and light machining will need to be performed to
complete the guitar.
Recommended Tools & Supplies:
—Phillips Screwdriver
—Needle-Nose Pliers
—Electric Drill
—Drill Bit Set
—Soldering Iron & Solder
—#180, #240, and #320 Aluminum-Oxide
Sanding Paper
—Sanding Block
—Masking Tape
—Painting/Finishing Supplies
—Coat Hanger
—C-Clamp
—5MM Allen Wrench (Supplied)
—1.5MM Allen Wrench (Supplied)
—Tack Cloth
—Coping, Jig, or Scroll Saw (Optional)
The guitar body has been machined and rough
sanded at the factory; however, no finish has
been applied.
To sand the guitar body:
1. Wear an ANSI-approved dust mask and
safety glasses when sanding wood!
2. Using either an electric palm sander or a
sanding block, sand the guitar body
(EXCEPT the guitar neck notch and other
recessed areas) with #180 grit aluminum-
oxide sanding paper until there is a consis-
tent scratch pattern on the entire surface.
3. Sand the guitar body with a #240 grit sand-
ing paper until there is a consistent scratch
pattern on the entire surface.
4. Sand the guitar body with a #320 grit sand-
ing paper until there is a consistent scratch
pattern on the entire surface.
5. Wipe the guitar body with a damp cloth.
Wiping the workpiece with a damp cloth
before the final sanding helps to “raise” the
wood grain; thus, allowing the “raised” grain
to be sanded smooth.
6. Once the guitar body is dry, repeat step 4.
7. Wipe the guitar body with a tack cloth to
remove all remaining sanding dust.
Guitar BodySupplies/Tools
SECTION 4: SANDING/FINISHING
Table des matières
Autres manuels Grizzly Instrument de musique
Grizzly
Grizzly T23750 Manuel utilisateur
Grizzly
Grizzly H8066 Manuel utilisateur
Grizzly
Grizzly H7580 Manuel utilisateur
Grizzly
Grizzly H3099 Manuel utilisateur
Grizzly
Grizzly H8068 Manuel utilisateur
Grizzly
Grizzly H7582 Manuel utilisateur
Grizzly
Grizzly T33952 Manuel utilisateur
Grizzly
Grizzly H5966 Manuel utilisateur
Grizzly
Grizzly T33957 Manuel utilisateur
Grizzly
Grizzly H7582 Manuel technique
