Grindmaster Precision Brew Manuel utilisateur

0505 Form # PD-305-01

Part # 94148

Operator Manual

Thank you for purchasing The PrecisionBrew™ Single Cup Brewing System. The

PrecisionBrew™ Single Cup Brewing System is the perfect brewer for people who

demand high performance and style from their kitchen appliances. Our single cup

brewer delivers your ideal cup of coffee or tea brewed under optimal conditions in

about 30 seconds. Our patent-pending brewing technology allows you to select the

perfect brew strength for a great tasting cup of freshly brewed coffee or tea every

time. Unlike other single-cup brewing systems, our exclusive design accepts a wide

variety of coffee and tea pods, making it easy for you to enjoy your favorite coffees

and teas anytime.

TABLE OF CONTENTS

Important Safeguards........................................................2

Product Overview..................................................................5

Preparing the Brewer for Use................................................6

Brewing Instructions..............................................................7

Brewer Features.....................................................................8

Cleaning...................................................................10

Troubleshooting...................................................................11

Specifications......................................................................12

Warranty............................................................................13

Page 2

READ ALL INSTRUCTIONS

Important Safeguards

This is the safety alert symbol. It is used to alert you to potential

personal injury hazards. Obey all safety messages that follow this

symbol to avoid possible injury or death.

Warning Decals and Precautions

The following labels were applied to your brewer when it was shipped from

the factory. The labels should remain in good readable condition at all times.

Located over the ON/OFF button

This warning label was placed over the on/off button at the factory, and the instructions for priming

the water tank must be followed AFTER pushing the on/off button “ON”, (refer to pg 6).

Located on the bottom of the unit

Located on cup grate

WARNING indicates a potentially hazardous situation

which, if not avoided, could result in death or

serious injury.

Located on splash panel

Page 3

Important Safeguards (continued)

Do not

attempt to open the brewing chamber while brewing.

Risk of scalding.

Do not

touch metal surfaces of the brew basket or any part of the

brewing chamber.

Risk of burns.

Do not

tilt the brewer or turn upside down.

Risk of electric shock.

Do not

use outdoors.

Risk of electric shock.

Do not

allow use by children or around children.

Risk of scalding.

Do not

move brewer unless unplugged, water reservoir drained and brewer

has cooled down.

Risk of electric shock and scalding.

Do not

fill water reservoir above maximum level indicated.

Risk of electric shock.

Do not

immerse brewer in water.

Risk of electric shock.

Do not

use any liquid other than cool drinking water in this machine.

Will void warranty.

Do not

operate brewer at temperatures below 50°F (10°C).

Will void warranty.

Do not

operate brewer at altitudes higher than 6,000 ft (1,829 m)

above sea level.

Will void warranty.

Do not

operate unit with a damaged cord or plug or after appliance

malfunctions, or has been damaged in any manner.

Risk of electric shock.

Do not

place cord, plugs, or appliance in water or other liquid.

Risk of electric shock.

Do not

let cord hang over edge of table or counter, or touch hot surfaces.

Risk of electric shock.

Do not

place unit on or near a hot gas or electric burner or on a heated oven.

Risk of electric shock.

Do not

use appliance for other than intended use.

The use of an accessory not evaluated for use with this appliance may

cause injuries.

place lid on reservoir when in use.

unplug brewer when not in use and before cleaning.

•

Page 4

Important Safeguards (continued)

Do unplug brewer before moving machine.

Do latch pod door securely by using the thumb grip at the center

of the brew chamber door.

SAVE THESE INSTRUCTIONS

The brewer is not ready to plug in.

Follow “Preparing the Brewer for Use” steps before plugging into power receptacle.

•



Page 5

Product Overview

Coffee or

Tea Pod

BREW Button

BREW Strength

Control

Cup Grate &

Drip Tray

*Mug not included

EasyPodTM

Brew Basket

Brew Chamber

Door

Water Reservoir

Lid

Water Reservoir

Carry Handle

Brew Chamber

Door Latch

Thumb Grip

Brew Spout

On/Off Button

Water Reservoir

Page 6

Preparing the Brewer for Use - AutoPrime & Flush

This procedure is only required prior to initial use.

Step 1:

Fill water reservoir with clean, room temperature tap or bottled water to the MAX

indicator line.

Step 2:

Place a container with a capacity of at least 32 ounces (1 L) on the cup grate, under

the spout.

Step 3:

Be sure the door on the brewing chamber is latched, plug the unit into a 120V/15A

power receptacle and press the ON/OFF button "ON".

Step 4:

The BREW button will cycle through several colors before pulsing purple. When the

BREW button pulses purple, press and hold the BREW button down for 5 seconds to

activate the AutoPrime & Flush. The AutoPrime & Flush feature only occurs on the initial

use of unit.

Step 5:

The BREW button will turn a solid aqua color while the hot water tank, inside the

brewer, fills and water is flushed through the unit and out the brew spout. Discard the

water that flushes out of the spout and into the bowl after the water stops dispensing

from the brew spout. The water reservoir will be low and should be refilled to the

MAX line before brewing.

Step 6:

Remove the WARNING decal from the ON/OFF button. The BREW button will be

slowly flashing red indicating that the unit is heating. The BREW button will turn green

when the unit is ready to brew coffee or tea.

NOTE: If the unit is not used for an extended period of time, it is necessary to

manually prime the unit upon restarting. To manually prime the unit, be sure water

reservoir is filled to the MAX line, turn the unit "On" and place a 32 ounce (1 L)

container on the cup grate to catch the water that will dispense. Press and hold the

BREW button until water is dispensed from the brew spout (water will begin to

dispense from the brew spout after 5 seconds and the BREW button will be aqua).

Release the BREW button after water is seen coming out of the brew spout to end the

priming function. Discard the water that has been dispensed during priming. The unit

will begin the normal heating cycle (the BREW button will slowly pulse red).

Page 7

Brewing Instructions

Step 1:

After the unit has been prepared for use (refer to page 6 for instructions), the water

reservoir will be low (the BREW button may be flashing aqua indicating low water

level). Refill the water reservoir to the MAX indicator line. The brewer will begin to heat

the water and the BREW button will slowly pulse red.

Step 2:

When the water is hot, the BREW button will turn solid yellow.

Step 3:

Open the brew chamber door and insert a coffee pod into the brew basket.

Step 4:

Latch the brew chamber door and place a cup that holds at least 10 ounces (296 ml)

on the cup grate, under the spout.

Step 5:

Select brew strength (Mild (O), Med (O) or Strong (O)) or Tea.

Step 6:

Press and release the green BREW button to begin brewing. (You must press and

release the BREW button within 60 seconds of latching the brew chamber door to

begin the brew cycle.)

Step 7:

Once brew is complete (no more coffee or tea is being dispensed; pump stops), open

the brew chamber to release the last bit of coffee or tea into your cup.

NOTE:

If the BREW button turns yellow, before dispensing, check to be sure the

brew chamber door is closed. If the door is already closed, open and close the

brew chamber door to reset the brewer. This will cause the BREW button to turn

green, indicating the brewer is ready to brew. Press and release the green BREW

button to begin brewing.

Page 8

Brewer Features

Cup Volume:

The brewer is factory preset to dispense approximately 9 fluid ounces (266 ml) of

water without a coffee pod installed. Depending on the type of coffee pod used, the

coffee pod will absorb approximately 1 fluid ounce (30 ml) of water during the brew

cycle. The resulting volume in the cup will be approximately 8 fl. oz. (237 ml).

Important: To prevent overflow, cups used for brewing coffee into must be greater in

volume than the amount of coffee being brewed. For example, an 8 fluid ounce

(237 ml) brew volume will dictate the use of a minimum 10 fluid ounce (296 ml) cup.

This brewer can be manually adjusted to deliver more or less volume. To dispense a

cup with less volume than the preset 8 fl. oz. (237 ml), push the BREW button during

dispensing to stop dispensing.

To dispense a larger cup volume than the preset 8 fl. oz. (237 ml), allow the brewer to

dispense one complete brew cycle, replace the pod, shut the brew chamber door and

push the green BREW button. You may interrupt the brew cycle to get the desired cup

volume by pushing the BREW button during dispensing, or you can allow the second

brew cycle to complete for a 16 fl. oz. (474 ml) serving.

Brew Strength Control:

Changes coffee brew strengths (mild, medium or strong) or selects tea cycle.

Automatic Time-Out Feature:

The brewer will shut itself Off if left On and idle for 36 hours. Press the ON/OFF

button to reactivate.

Brew Lockout Feature:

NOTE: This feature is active from the factory.

This is a mechanism of the brewer which prevents the brewer from dispensing if the

BREW button is not pressed within 60 seconds of latching the brew chamber door. If

the BREW button is not pressed, within these 60 seconds, the BREW button will be

deactivated and turn yellow, disabling dispensing. To reactivate the brewer, open and

close the brew chamber door (replacing the pod if required). The BREW button will

turn green again, indicating that the brewer is ready to brew.

•

deactivate

this feature, push and hold the ON/OFF button for 5 seconds. (The

BREW button will momentarily flash red and white indicating that the Brew Lockout

Feature has been deactivated.)

reactivate

this feature, push and hold the ON/OFF button for 5 seconds again.

(The BREW button will momentarily flash white and green, indicating that the Brew

Lockout Feature has been activated.)

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Grindmaster Cafetière

Grindmaster

Grindmaster OPOD Manuel utilisateur

Grindmaster

Grindmaster 11 Mode d’emploi

Grindmaster

Grindmaster RC400 Manuel utilisateur

Grindmaster

Grindmaster Grind'n Brew Series Manuel utilisateur

Grindmaster

Grindmaster B-DAP Manuel utilisateur

Grindmaster

Grindmaster Grind'n Brew-10 Mode d’emploi

Grindmaster

Grindmaster ICB-400 Mode d’emploi

Grindmaster

Grindmaster American Metal Ware LCD2-1 Manuel utilisateur

Grindmaster

Grindmaster Insulated Decanter Brewer AMW B-Series Manuel utilisateur

Grindmaster

Grindmaster B-DAP Manuel utilisateur

Grindmaster

Grindmaster PrecisionBrew PB-430 Manuel utilisateur

Grindmaster

Grindmaster American Metal Ware LCD2-3 Manuel utilisateur

Grindmaster

Grindmaster PrecisionBrew PBIC-430 Manuel utilisateur

Grindmaster

Grindmaster 10 Mode d’emploi

Grindmaster

Grindmaster B-SAP Manuel utilisateur

Grindmaster

Grindmaster PrecisionBrew PB-330 Manuel utilisateur

Grindmaster

Grindmaster Grind'n Brew-10H Operation and Mode d’emploi

Grindmaster

Grindmaster B-DGP Manuel utilisateur

Grindmaster

Grindmaster RAPS300 Manuel utilisateur

Grindmaster

Grindmaster 10H Manuel utilisateur

Grindmaster

Grindmaster BA-P Manuel utilisateur

Grindmaster

Grindmaster OPOD-E Manuel utilisateur

Grindmaster

Grindmaster PrecisionBrew PBVSA-330 Manuel utilisateur

Grindmaster

Grindmaster B-ID Manuel utilisateur

Manuels Cafetière populaires d'autres marques

Taurus

Taurus Livorno 6 Manuel utilisateur

Delta-q

Delta-q QUICK Manuel utilisateur

Bunn

Bunn LCA-1 Guide de dépannage

Black & Decker

Black & Decker BLACK DECKER HOME DE790 Instructions d'installation

Saeco

Saeco Vienna Plus Sup 018M Manuel utilisateur

DeLonghi

DeLonghi DC300 Manuel utilisateur

INCAPTO

INCAPTO BXCO1470E Manuel utilisateur

Bosch

Bosch TASSIMO finesse TAS16B Series Manuel utilisateur

Exido

Exido 245-072 Manuel utilisateur

Animo

Animo OptiVend Choco Manuel utilisateur

Siemens

Siemens TQ505DF Series Manuel utilisateur

DeLonghi

DeLonghi ECI341 Manuel utilisateur

Krups

Krups KT406511 Manuel utilisateur

Cimbali

Cimbali M32 Classic Manuel utilisateur

Philips

Philips HL3844N Manuel utilisateur

Bosch

Bosch TES 515 SERIES Manuel utilisateur

Tekmatix

Tekmatix TMFM - 65 Manuel utilisateur

Scarlett

Scarlett SC-CM33005 Manuel utilisateur