GreenWorks STG307 Manuel utilisateur

24V 12" String Trimmer

EN

FR

OPERATOR MANUAL

MANUEL DE L’UTILISATEUR

STRING TRIMMER

COUPE-HERBE

9.7 ADJUST THE LENGTH OF THE

CUTTING LINE

While you operate the machine, the cutting line gets worn and

shorter. You can adjust the length of the cutting line.

1. Hit the trimmer head against the ground while you

operate the machine.

2. Line is automatically released and the cut-off blade cuts

the excess length.

9.8 ADJUST THE CUTTING

DIAMETER

NOTE

The machine is set at a 12 in. (305 mm) cutting diameter.

You can adjust to a 10 in. (254 mm) cutting diameter.

Set the cutting diameter to 10 in. (254 mm) for greater

runtime and 12 in. (305 mm)for a larger cutting area.

1. Remove the battery pack.

2. Remove the blade screws from the cut-off blade (16).

3. Turn the cut-off blade 180°.

4. Tighten the blade screws.

9.9 LINE CUT-OFF BLADE

This trimmer is equipped with a line cut-off blade on the

guard. The line cut off blade continuously trims the line to

ensure a consistent and efficient cut diameter. Advance line

whenever you hear the engine running faster than normal, or

when trimming efficiency diminishes. This will maintain best

performance and keep line long enough to advance properly.

10 MAINTENANCE

IMPORTANT

Read and understand the safety regulations and the

maintenance instructions before you clean, repair or do the

maintenance work on the machine.

IMPORTANT

Make sure that all nuts, bolts and screws are tight. Examine

regularly that you install the handles tightly.

IMPORTANT

Use only the replacement parts and accessories of the initial

manufacturer.

10.1 GENERAL INFORMATION

IMPORTANT

Only your dealer or approved service center can do the

maintenance that is not given in this manual.

Before the maintenance operations:

• Stop the machine.

• Remove the battery pack.

• Cool the motor.

• Store the machine in cool and dry place.

• Use correct clothing, protective gloves and safety glasses.

10

English

EN

Autres manuels pour STG307

3

Ce manuel convient aux modèles suivants

1

Table des matières

Autres manuels GreenWorks Tondeuse

GreenWorks

GreenWorks GH 260 Manuel utilisateur

GreenWorks

GreenWorks STF457 Manuel utilisateur

GreenWorks

GreenWorks HTA22 Manuel utilisateur

GreenWorks

GreenWorks HT40L00 Manuel utilisateur

GreenWorks

GreenWorks G48ST8 Manuel utilisateur

GreenWorks

GreenWorks 22232 Manuel utilisateur

GreenWorks

GreenWorks 2100007AU Manuel utilisateur

GreenWorks

GreenWorks HTB441 Manuel utilisateur

GreenWorks

GreenWorks PSPH40B00 Manuel utilisateur

GreenWorks

GreenWorks EITE ST-140-T Manuel utilisateur

GreenWorks

GreenWorks ST40B01 Manuel utilisateur

GreenWorks

GreenWorks G24LT30M Manuel utilisateur

GreenWorks

GreenWorks STG307 Manuel utilisateur

GreenWorks

GreenWorks ST40L02 Manuel utilisateur

GreenWorks

GreenWorks HTF313 Manuel utilisateur

GreenWorks

GreenWorks 2101202 Manuel utilisateur

GreenWorks

GreenWorks STF311 Manuel utilisateur

GreenWorks

GreenWorks STP302 Manuel utilisateur

GreenWorks

GreenWorks 21342 Manuel utilisateur

GreenWorks

GreenWorks STG308 Manuel utilisateur

GreenWorks

GreenWorks G24PSHK2 Manuel utilisateur

GreenWorks

GreenWorks ST60L414 Manuel utilisateur

GreenWorks

GreenWorks G40PSH Manuel utilisateur

GreenWorks

GreenWorks 22332 Manuel utilisateur

Manuels Tondeuse populaires d'autres marques

MTD

MTD HT 51 E Manuel utilisateur

McCulloch

McCulloch T22 LS Manuel utilisateur

COCKRAFT

COCKRAFT PRO HL36-S Manuel utilisateur

Grizzly

Grizzly CT 1800 Li Manuel utilisateur

Peco

Peco Z Trimmer ZT-3000 Manuel utilisateur

Solo

Solo 116 Manuel utilisateur

Stiga

Stiga ST 1200 Manuel utilisateur

Echo

Echo GT-225 - 10-09 Manuel utilisateur

RedMax

RedMax BT17 Manuel utilisateur

Parkside

Parkside PHSL 900 A3 Manuel utilisateur

Gardeo

Gardeo PRO GPTHT2560 Manuel utilisateur

Park

Park DT-810870 Manuel utilisateur

Worx

Worx WG209 Manuel utilisateur

Gardenline

Gardenline 43671/HTKS26 Manuel utilisateur

Makita

Makita 3710 Manuel utilisateur

Champion

Champion 100683 Manuel utilisateur

Stihl

Stihl FS 311 Manuel utilisateur

Efco

Efco STARK 38 Manuel