Greenlee 880 Manuel utilisateur
INSTRUCTION MANUAL
Read and understand all of the instructions and
safety information in this manual before operating
or servicing this tool.
Register this product at www.greenlee.com
99988003 © 2019 Greenlee Tools, Inc. IM 1016 REV 3 3/19
PVC Shoes for Use with
880/884 Benders
PVC Shoes for Use with 880/884 Benders
Greenlee Tools, Inc. 4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070
2
Description
PVC-type bending shoes are intended to be used with
Greenlee 880 and 884 Conduit Benders. They are
designed to bend PVC-coated rigid conduit. The 1-1/2"
and 2" shoes have a single hex cam to eject the conduit
after it is bent; the 3" to 4" shoes have two hex cams.
Safety
Safety is essential in the use and maintenance of
Greenlee tools and equipment. This instruction manual
and any markings on the tool provide information for
avoiding hazards and unsafe practices related to the
use of this tool. Observe all of the safety information
provided.
Purpose of this Manual
This manual is intended to familiarize all personnel with
the safe operation and maintenance procedures for the
Greenlee PVC-type bending shoes.
Keep this manual available to all personnel.
Replacement manuals are available upon request at no
charge at www.greenlee.com.
All specications are nominal and may change as design
improvements occur. Greenlee Tools, Inc. shall not be liable for
damages resulting from misapplication or misuse of its products.
KEEP THIS MANUAL
Table of Contents
Description .................................................................... 2
Safety ............................................................................ 2
Purpose of this Manual ................................................. 2
Important Safety Information ........................................ 3
Shoes and Supports...................................................... 4
How to Bend ..............................................................5–6
Shoe Unit Illustration and Parts List.............................. 7
PVC Shoes for Use with 880/884 Benders
Greenlee Tools, Inc. 4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070
3
IMPORTANT SAFETY INFORMATION
SAFETY
ALERT
SYMBOL
This symbol is used to call your attention to hazards
or unsafe practices which could result in an injury or
property damage. The signal word, dened below,
indicates the severity of the hazard. The message
after the signal word provides information for pre-
venting or avoiding the hazard.
Immediate hazards which, if not avoided, WILL result
in severe injury or death.
Hazards which, if not avoided, COULD result in
severe injury or death.
Hazards or unsafe practices which, if not avoided,
MAY result in injury or property damage.
Read and understand all of the
instructions and safety information
in this manual before operating or
servicing this tool. Also follow the
instructions and safety information
supplied with your bender and pump.
Failure to observe this warning could
result in severe injury or death.
Pinch points:
Keep hands away from bending shoe,
pipe supports, and conduit when
bender is in use.
Failure to observe this warning could
result in severe injury or death.
Wear eye protection when bending
conduit.
Failure to observe this warning could
result in severe injury.
Inspect the shoes and conduit supports before
each use. Replace damaged, worn or missing parts
with Greenlee replacement parts. A damaged or
incorrectly assembled component can fail and strike
nearby personnel.
Some of the bending shoes are heavy (42 lb) and may
require more than one person to lift.
Improper lifting may result in injury.
Note: Keep all decals clean and legible, and replace
when necessary.
PVC Shoes for Use with 880/884 Benders
Greenlee Tools, Inc. 4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070
4
Shoes and Supports to Bend 40 Mil PVC-Coated Rigid Conduit
Use these accessories with your 880 or 884 bender.
40 Mil
Coated Size
UPC No.
78-3310- Description Centerline
Radius
Included in
880 PVC
Included in
884 PVC 33612
1/2" 33456 Shoe Unit 4"
3/4" 33457G Shoe Unit 4-1/2"
1" 33458 Shoe Unit 5-3/4" 1 1
1-1/4" 33459 Shoe Unit 7-1/4" 1 1 1
1-1/2" 33463 Shoe Unit 8-1/4" 1 1 1
2" 33462G Shoe Unit 9-1/2" 1 1 1
2-1/2" 34321 Shoe Unit 11-7/16"
3" 34340 Shoe Unit 13-3/4" 1
3-1/2" 34342G Shoe Unit 16"
4" 34344 Shoe Unit 18-1/4" 1
1/2"–2" 33455G Conduit Support for 880 Bender 2 2
1/2"–4" 33454 Conduit Support for 884 and 885 Benders 2
34329 7/8" Wrench 1 1 1
880 PVC Bender
for bending 1"–2" PVC-coated rigid conduit
884 PVC Bender
for bending 1-1/4"–4" PVC-coated rigid conduit
33612 Shoe Group
for 1"–2" 40 Mil PVC-coated rigid conduit
Use with 880 Greenlee Bender
PVC Shoes for Use with 880/884 Benders
Greenlee Tools, Inc. 4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070
5
How to Bend
Step 1
Select the size of shoe that corresponds to the size of
conduit. Check the cam location. If the cam is extended,
retract the cam by turning the 7/8" headcam with a
wrench.
Note: Shoes smaller than 1-1/2" do not have a cam;
3" and larger shoes have two cams.
Cam extended (for ejecting conduit)
Cam retracted (for bending conduit)
Step 3
Rotate the conduit support so that the appropriate
groove is toward the conduit.
Note: For bending more than 75° in 1" PVC-coated
conduit, rotate the conduit support so that the large
groove faces the conduit.
Step 2
Attach the shoe support to the ram with the ram pin.
Note: When using the 2" or smaller shoe, use the small
shoe support. When using 2-1/2" or larger shoe, use the
large shoe support.
Attach the shoe to the shoe support with the shoe pin.
Step 4
Position both conduit supports in line with the cor-
responding holes in the bender frame. Insert the pipe
support pin through the upper frame plate, through the
conduit support, and through the lower frame plate.
Lock the pipe support pins in place with pin locks.
PVC Shoes for Use with 880/884 Benders
Greenlee Tools, Inc. 4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070
6
How to Bend (cont’d)
Step 5
Advance the shoe by operating the hydraulic pump.
Note: Refer to the instructions supplied with the
hydraulic pump.
While the shoe is advancing, make sure that the
conduit is properly seated in the conduit supports and
the shoe groove.
Step 7
Release the pressure at hydraulic pump.
Note: Refer to the instructions supplied with the
hydraulic pump.
After the ram has retracted completely, remove the
pipe support pins and pipe supports.
Step 6
Using the bender instructions, bend the PVC-coated
conduit to the desired angle.
Step 8
Remove the conduit from the bender. Inspect the PVC
coating. Touch up if necessary.
This side—turn
counterclockwise
to remove conduit.
This side—turn
clockwise to
remove conduit.
PVC Shoes for Use with 880/884 Benders
Greenlee Tools, Inc. 4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070
7
Shoe Unit Illustration and Parts List
SHOULDER
BOLT
SHOE
SPRING
CAM
(A) SHOULDER
BOLT
(A) SPRING
(A) CAM
(B) SHOULDER
BOLT
(B) SPRING
(B) CAM
Items marked with (•) are included in the associated service kit.
Size Cat. No.
Shoe Unit
Service Kit
Part No.
(A)
Shoulder Bolt
(A)
Cam
(A)
Spring
(B)
Shoulder Bolt
(B)
Cam
(B)
Spring
1/2" 33456
3/4" 33457G
1" 33458
1-1/4" 33459
1-1/2" 33463 52059254 • • •
2" 33462G 52059255 • • •
2-1/2" 34321 52059261 • • •
3" 34340 52059256 • • • • • •
3-1/2" 34342G 52059250 • • • • • •
4" 34344 52059257 • • • • • •
4455 Boeing Drive • Rockford, IL 61109-2988 • USA • 815-397-7070
©2019 Greenlee Tools, Inc. • An ISO 9001 Company
USA Tel: 800-435-0786
Fax: 800-451-2632
Canada Tel: 800-435-0786
Fax: 800-524-2853
International Tel: +1-815-397-7070
Fax: +1-815-397-9247
www.greenlee.com
Autres manuels pour 880
1
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels Greenlee Matériel de construction
Greenlee
Greenlee 800 Guide de l'utilisateur
Greenlee
Greenlee 881-MBT Manuel utilisateur
Greenlee
Greenlee 555BAT Manuel utilisateur
Greenlee
Greenlee 555 Series Manuel utilisateur
Greenlee
Greenlee 777 Manuel utilisateur
Greenlee
Greenlee 855GX Manuel utilisateur
Greenlee
Greenlee 855GX Manuel utilisateur
Greenlee
Greenlee 555 Series Manuel utilisateur
Greenlee
Greenlee 555 Series Manuel utilisateur
Greenlee
Greenlee 555 Series Manuel utilisateur
Greenlee
Greenlee 555C Manuel utilisateur
Greenlee
Greenlee SITE-RITE 840 Manuel utilisateur
Greenlee
Greenlee Site-Rite 844A Manuel d'utilisation
Greenlee
Greenlee 555 Series Manuel utilisateur
Greenlee
Greenlee G6 Turbo Manuel utilisateur
Greenlee
Greenlee 880 Mode d’emploi
Greenlee
Greenlee Cam Track 881GX Manuel utilisateur
Greenlee
Greenlee Cam Track 881 Manuel utilisateur
Greenlee
Greenlee 777 Manuel utilisateur
Greenlee
Greenlee 555RSC Manuel utilisateur
