Greenheck ESD-635D Manuel utilisateur

ESD-635D Flange/Sleeve Installation with Damper 1

Installation, Operation and Maintenance Manual

Please read and save these instructions for future reference. Read carefully before attempting to assemble, install,

operate or maintain the product described. Protect yourself and others by observing all safety information. Failure

to comply with these instructions will result in voiding of the product warranty and may result in personal injury

and/or property damage.

Document 474638

ESD-635D

Flange/Sleeve Installation

with VCD-40 Damper

Florida Product Approval No: FL10088

Miami-Dade NOA No.: 17-0919.04

Maximum Wind-load: 150 PSF

ESD-635D Flange/Sleeve Installation with Damper2

Florida Product Approval No: FL10088

Miami-Dade NOA No.: 17-0919.04

Maximum Wind-load: 150 PSF

Maximum Size and Installation Information

Model ESD-635D with VCD-40 is a Miami-Dade Qualified and Florida Product Approved louver and must be installed

in accordance with the installation instructions shown herein. Model ESD-635D with VCD-40 is qualified for installation

within concrete/masonry, steel stud, structural steel or wood framed building conditions. Model ESD-635D with VCD-40 is

structurally calculated to withstand positive and negative wind-loads up to 150 PSF. The maximum single section rough

opening width is 36.50 in. The maximum single section rough opening height is 144.50 in. While the maximum rough opening

height is limited to 144.50 in., the rough opening width is limited to 1,000 in. as multiple sections may be installed side by

side in accordance with installation instructions.

Minimum Rough

Opening Size

12 in. W x 15.25 in. H

Maximum Single Section

Rough Opening Size

36.50 in. W x 144.50 in. H

Building Condition/Substrate Limitations

• All wood substrate shall be G= 0.55 density or better

• All metal stud substrate should be min. 16 Ga. FY= 50 KSI

• All structural steel substrate shall be min. 0.25 in. thick FY= 36 KSI

• All concrete substrate shall be min. 3000 PSI

• Concrete masonry shall be ASTM C90, Type II, 2000 PSI, grout-filled

ESD-635D Flange/Sleeve Installation with Damper 3

Florida Product Approval No: FL10088

Miami-Dade NOA No.: 17-0919.04

Maximum Wind-load: 150 PSF

Single Section

ESD-635D Flange/Sleeve Installation with Damper4

Florida Product Approval No: FL10088

Miami-Dade NOA No.: 17-0919.04

Maximum Wind-load: 150 PSF

Multiple Sections

Height ≤ 96 ½

ESD-635D Flange/Sleeve Installation with Damper 5

Florida Product Approval No: FL10088

Miami-Dade NOA No.: 17-0919.04

Maximum Wind-load: 150 PSF

Multiple Sections

Height > 96 ½ ≤ 144 ½

ESD-635D Flange/Sleeve Installation with Damper6

Florida Product Approval No: FL10088

Miami-Dade NOA No.: 17-0919.04

Maximum Wind-load: 150 PSF

Single Section

Structure Depth

• Min. structure depth 4 in.

• Max. structure depth 14.5 in.

ESD-635D Flange/Sleeve Installation with Damper 7

Florida Product Approval No: FL10088

Miami-Dade NOA No.: 17-0919.04

Maximum Wind-load: 150 PSF

Multiple Sections

Height ≤ 96 ½

Structure Depth

• Min. structure depth 4 in.

• Max. structure depth 11.5 in.

As a result of our commitment to continuous improvement, Greenheck reserves the right to change speciﬁcations

without notice.

Product warranties can be found online at Greenheck.com, either on the speciﬁc product page or in the literature

section of the website at Greenheck.com/Resources/Library/Literature.

Phone: 715.359.6171 • Fax: 715.355.2399 • Parts: 800.355.5354 • E-mail: [email protected] • Website: www.greenheck.com

Our Commitment

Florida Product Approval No: FL10088

Miami-Dade NOA No.: 17-0919.04

Maximum Wind-load: 150 PSF

Multiple Sections

Height > 96 ½ ≤ 144 ½

Structure Depth

• Min. structure depth 4 in.

• Max. structure depth 13.25 in.

Table des matières

Autres manuels Greenheck Ventilateur

Greenheck

Greenheck SP-AP0511W Manuel utilisateur

Greenheck

Greenheck BDF Manuel utilisateur

Greenheck

Greenheck DFD-M150 Manuel utilisateur

Greenheck

Greenheck Vektor ERS-MD Manuel utilisateur

Greenheck

Greenheck IGX-HV Manuel utilisateur

Greenheck

Greenheck TBI Manuel utilisateur

Greenheck

Greenheck ERV Series Manuel utilisateur

Greenheck

Greenheck ASSURE-120S-S1 Manuel utilisateur

Greenheck

Greenheck CUBE-098 Guide d'installation

Greenheck

Greenheck APEX-200 Manuel d'instructions

Greenheck

Greenheck AER Manuel utilisateur

Greenheck

Greenheck SE1 Manuel utilisateur

Greenheck

Greenheck SQ 60-75 Manuel utilisateur

Greenheck

Greenheck ERV-251 Manuel utilisateur

Greenheck

Greenheck RV Manuel utilisateur

Greenheck

Greenheck EHH-201 Manuel utilisateur

Greenheck

Greenheck BIDW Manuel utilisateur

Greenheck

Greenheck 240XP-CUB Manuel utilisateur

Greenheck

Greenheck ERVe Series Manuel utilisateur

Greenheck

Greenheck VersiVent VER-45 Manuel utilisateur

Greenheck

Greenheck CUE Series Manuel utilisateur

Greenheck

Greenheck PVE-20 Manuel utilisateur

Greenheck

Greenheck ABD Series Instructions d'installation et d'utilisation

Greenheck

Greenheck DDF Manuel utilisateur

Manuels Ventilateur populaires d'autres marques

ELTA FANS

ELTA FANS H03VV-F Manuel utilisateur

Hunter

Hunter 20714 Manuel d'instructions

Emerson

Emerson CARRERA VERANDA CF542ORB00 Manuel utilisateur

Hunter

Hunter Caraway Manuel d'instructions

Panasonic

Panasonic FV-15NLFS1 Manuel utilisateur

Kompernass

Kompernass KH 1150 Manuel utilisateur

VES

VES FALA100/12V/TR Manuel utilisateur

Vertiv

Vertiv Liebert DCD Manuel utilisateur

Westinghouse

Westinghouse GFP Series Manuel utilisateur

Venmar

Venmar KUBIX HRV PLUS Series Manuel utilisateur

Maico

Maico ECR 31 Manuel utilisateur

Sonnenkonig

Sonnenkonig Dinky Manuel utilisateur

S&P

S&P ECOWATT HXBR Manuel utilisateur

Wider

Wider IMP03369BH Manuel utilisateur

Panasonic

Panasonic F-60DHN Manuel utilisateur

Hinkley

Hinkley HIGHLAND Manuel utilisateur

Broan

Broan 766BN Manuel utilisateur

Premium

Premium PFS16022 Instructions de montage