-A1-
1General Safety Instructions
1.1 Basic Operation
Read the operation and safety manual prior to using the strapping machine.
The operation and safety manual should remain attached to the machine at all times.
The machine may only be operated in accordance with its designated use.
The strapping machine was built in accordance with state-of-the-art standards and
recognized safety rules. Nevertheless, improper use can still result in injury to personnel
or damage to the machine and other material property.
Machine shall only be operated by trained personnel.
Perform inspections and maintenance at regular intervals. Refer to the Maintenance
section of the manual.
The machine may not be put in operation before checking the respective devices.
Safety devices must never be bridged or eliminated by any means.
To transport the equipment only use lifting apparatus and loading devices with sufficient
capacity.
Always disconnect from external power supply when changing the location of the
machine, even if the location should only be slightly changed. Connect power supply
properly before returning to service.
Do not alter or bypass protective interlocks.
Do not alter circuits and machine unless authorized to do so by the manufacturer.
1.2 Basic Safety Precautions
In addition to the instructions for operation, the user is to be instructed in all generally
applicable legal or mandatory regulations relevant to safety or the environment.
Long hair, loose-fitting garments, or jewelry can be a safety hazard. These items must be
secured prior to equipment operation.
Use protective equipment whenever appropriate or when required by law.
Carefully observe all safety instructions and warnings attached to the machine. Keep
safety labels clean and legible.
People that are being trained to operate or service the equipment must be supervised by
experienced personnel.
Any electrical work performed on the equipment must be conducted by a skilled
electrician or under the supervision of a skilled electrician. All work must be observed
good electrical engineering practice and follow safety rules and local wiring standards.
