GRAUPNER X44 Manuel utilisateur

Manual

X44

VTOL electric model plane with 4 Brushless motors

9944.100

9944.RTF_jh_V1

2 - 16

9944.RTF_jh_V1 3- 16

Content table

Introduction ........................................................................... 4

Service centre ........................................................................ 4

Intended use ........................................................................ 5

Package content ................................................................... 5

Symbol description ................................................................ 6

Safety notes .......................................................................... 6

Required tools and adhesives (not included) .......................... 8

Suggested accessories (not included) .................................... 8

The model assembly .............................................................. 8

Charging LiPo batteries ...........................................................

Installing the LiPo battery ...................................................... 9

The X 44 FLIGHT CONTROL ................................................. 9

Installing the propellers ....................................................... 10

The first flight ....................................................................... 12

Technical data ..................................................................... 12

Properties ............................................................................ 13

Spare parts (not included) .................................................... 13

Notes on environmental protection ...................................... 14

Care and maintenance ........................................................ 14

Warranty certificate .............................................................. 14

Declaration of conformity ..................................................... 15

4 - 16 9944.RTF_jh_V1

Introduction

Thank you very much for choosing a Graupner X44. This X44

is extremely versatile.

Read this manual carefully to achieve the best results with

your X44 and ﬁrst of all to control safely your model. If you

experience any trouble during operation, take the instruc-

tions to help or ask your dealer or Graupner Service Centre.

Due to technical changes, the information may be changed

in this manual without prior notice. Be always updated

by checking periodically for news on our website, www.

graupner.de

This product complies with national and European legal

requirements.

To maintain this condition and to ensure safe operation, you

must read and follow this user manual and the safety notes

before using the product!

NOTE

This manual is part of that product. It contains important in-

formation concerning operation and handling. Keep these

instructions for future reference! Take this into considera-

tion when you pass it on to other future owner.

Service centre

Graupner-Zentralservice

Graupner GmbH

Henriettenstrasse 96

D-73230 Kirchheim / Teck

Servicehotline

(+49) (0)7021/722-130

Mon - Thu

7:30 am - 9:00 am

9:15 am - 4:00 pm

Fri

9:00 am - 1:00 pm

For the sevice centres outside Germany please refere to our

bew site www.graupner.de

Graupner in Internet

5- 16

9944.RTF_jh_V1

Intended use

The X44 is an almost ready to fly, remote-controlled airplane

model. More punctual information about X44 can be found in the

Technical data section. The X44 is designed exclusively to be

used as a battery-powered, radio controlled model, any other

use is not allowed. For any improper use no warranty or liability

is accepted.

Read through this entire manual before you attempt to program

or use the X44.

Graupner constantly works on the development of all products;

we reserve the right to change the item, its technology and

equipment.

Target group

The model is not a toy. It is not suitable for children under

14 years. The mounting and operation of the X44 must be

performed by experienced modellers. If you do not have

sufﬁcient knowledge about dealing with radio-controlled

models, please contact an experienced modeller or a model

club.

Package content

1. X 44 Model

2. Rudder with glue contact parts

3. Landing gear

4. Propeller set with propeller adapter

5. Spare propeller set

6. Manual in English, German, French

and Italian

9944.RTF_jh_V1

6 - 16

Symbol description

Always follow the information marked with the CAUTION or WARN-

ING symbol. The signal word WARNING indicates the potential for

serious injury, the signal word CAUTION indicates potential minor

injuries.

The NOTE indicates important information that should alert you

to potential property damage.

Safety notes

General

These safety instructions are intended not only to protect

the product, but also for your own and other people’s safe-

ty. Therefore please read this section very carefully before

using the product!

Do not leave the packaging material lying around, this could

be a dangerous toy for children.

Persons, including children, with reduced physical,

sensory or mental capabilities, or lack of experience or

knowledge, or not capable to use safely the receiver,

must not use it without supervision or instruction by a

responsible person.

The operation of radio controlled models must be

learned! If you have never driven such a model, then

start extra carefully and make sure to be familiar with the

reactions of the model to the remote control commands.

Proceed responsibly.

The insurance is mandatory for all kinds of model oper-

ation. If you already have one check out whether the

operation of the model is covered.

Always fly with a safe distance away from people and objects,

never fly low over people or directly towards them!

Never fly the model near power lines, industrial sites, resi-

dential areas, public roads, school yards or playgrounds

etc..

All model flyers must behave in such a way that public safety,

especially other people and property, as well as orderly flying

operations is not jeopardized or disrupted.

Inform passers-by and spectators before the start of the

dangers posed by your model and exhort them to keep a

safe distance.

Also observe the accompanying warnings of battery.

9944.RTF_jh_V1 7- 16

Controls before the start

Before each use, check proper function. For this purpose

switch on the transmitter and the receiving system. Check

that all controls are in neutral position, function properly and

turn down the correct side.

When flying a model aircraft for the first time, it is advanta-

geous if an experienced helper stands aside in the review

and the first flights.

Propellers powered by a motor represent a constant risk of

injury. Do not touch them with any part of the body! A rapidly

spinning propeller can e.g. cut a finger!

Keep well out of the rotational plane of the propeller! A part

of it or the entire propeller could broke and fly off at high

speed, hitting you or third parties. This can cause serious

injury. Make sure that no object gets in touch with a revolv-

ing propeller!

The blockage of the propeller, for any object must be

excluded.

Check each time before the model itself and everything

attached to it (e.g. propeller, tailplane etc.) is in good condi-

tion and undamaged. The model may be taken in operation

only after removal of all defects.

Radio interference caused by unknown sources can occur

without warning! The model is then uncontrollable and com-

pletely unpredictable! Do not leave the radio control system

unattended, to prevent operation by third parties.

Electric motor should be activated only if there is nothing in

the rotational plane of the propeller. Do not attempt to stop

the spinning propeller. Power the electric motors only with

the propeller installed.

The attitude of the model must always be clearly visible

throughout the flight, to ensure always a safely use and avoid

problems. Familiarize yourself during the flight, if any mal-

function / interference becomes noticeable, the landing must

be initiated immediately for safety reasons. You always give

way to other aircraft. Start and landing strips should be kept

free of people and other obstacles.

9944.RTF_jh_V1

8 - 16

Required tools and adhesives (not included)

Allen key 1,5 mm

Superglue * No.5821

Activator for instant adhesives * No.953.150

Phillips screwdriver *.

* These items are required for any repairs.

Suggested accessories (not included)

mz-12 HoTT No. S1002.DE

LiPo charger ULTRAMAT 14 plus No. 6464

Charge cable XT-60 No. S8386

LiPo battery 20 C 4/1300 14,8 V No. 9944.85

The model assembly

The model is ready to fly after a few adhesive or assembly steps,

the following instructions should be observed carefully so that

safe operation is ensured.

Fixing the rudder (2) to the fuselage (1)

For this purpose on both sides thin the enclosed contact adhe-

sive to the bonding surfaces, let the glue dry for about 1 minute,

then put off the rudder (2) and press firmly.

Inserting the landing gear (3) in the fuselage (1)

9944.RTF_jh_V1 9- 16

Installing the LiPo battery

First open the canopy. Hold the side to open at the front and pull

upwards

The figure shows the already installed LiPo battery.

CAUTION Risk of injury by rotating propellers, motors can start uncontrol-

lably when the XT-60 connector of the battery is connected.

Always mount propellers only after a complete general check.

The X 44 FLIGHT CONTROL

FLIGHT CONTROL X44 connection cables (left). The optional receiver will be

placed near it (right). The outputs have to be connected in the following

order:

1. Aileron

2. Elevator

3. Motor speed control

4. Rudder Note: the function is obtained by the motor speed

control

5. Control of the motor gondolas and flight mode, heli and aero

9944.RTF_jh_V1

10 - 16

The Flight Control is a highly complex electronic unit, that aero-

dynamically stabilizes the model over several gyros. Both aileron

/ elevator of the rear wing and the speed control of each brush-

less motor are controlled by this unit.

NOTE

Note that the model has to be hold after connecting the XT-60

connector in a stable position on a flat surface until the gyros of

Flight Control have initialized. This process takes a few seconds

and is confirmed by several beeps of the motors. The motor

gondolas run first on a 45 ° position. Only after this operation,

the Flight Control is functionally ready.

Note that the two rear motor gondolas are inclined in the vertical

neutral position approximately 2 ° forward, this is not a defect

but for optimal flight characteristics it is so required.

Also note that all rudder deflections are factory set correctly and

the control surfaces move when LiPo battery is connected, if

you tilt or rotate the model.

Installing the propellers

CAUTION Risk of injury by rotating propellers when starting the motors.

Always unplug the XT-60 connector to the LiPo battery before

working on the propellers.

Tightening the prop adapter (4) with a 1,5 mm Allen key

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels GRAUPNER Jouet

GRAUPNER

GRAUPNER TAXI CUP II Mode d’emploi

GRAUPNER

GRAUPNER GF-5 Manuel utilisateur

GRAUPNER

GRAUPNER BERNHARD GRUBEN model boat Manuel utilisateur

GRAUPNER

GRAUPNER SYDNEY STAR Manuel utilisateur

GRAUPNER

GRAUPNER MAXIE SPORT 490 Mode d’emploi

GRAUPNER

GRAUPNER U-16 EMDEN Manuel utilisateur

GRAUPNER

GRAUPNER ROMMEL Manuel utilisateur

GRAUPNER

GRAUPNER Husky 1800S Manuel utilisateur

GRAUPNER

GRAUPNER 9547 Mode d’emploi

GRAUPNER

GRAUPNER PILOT Mode d’emploi

GRAUPNER

GRAUPNER SEA FURY 9354 Manuel utilisateur

GRAUPNER

GRAUPNER MICRO MAGIC Manuel utilisateur

GRAUPNER

GRAUPNER JULES VERNE Mode d’emploi

GRAUPNER

GRAUPNER ELEKTRO-ROOKIE S Mode d’emploi

GRAUPNER

GRAUPNER harpoon II Mode d’emploi

GRAUPNER

GRAUPNER BELLANCA Manuel utilisateur

GRAUPNER

GRAUPNER SPEED Manuel utilisateur

GRAUPNER

GRAUPNER Junior Line Series Manuel utilisateur

GRAUPNER

GRAUPNER 2387 Manuel utilisateur

GRAUPNER

GRAUPNER EPIC Victory S Manuel utilisateur

GRAUPNER

GRAUPNER DISCUS 2CT Manuel utilisateur

GRAUPNER

GRAUPNER DEPRO RAVEN Mode d’emploi

GRAUPNER

GRAUPNER MINI DISCUS 2C Mode d’emploi

GRAUPNER

GRAUPNER 4469.400 Manuel utilisateur

Manuels Jouet populaires d'autres marques

marklin

marklin 37321 Manuel utilisateur

Canon

Canon PAPER CRAFT Manuel utilisateur

GREAT PLANES

GREAT PLANES Pitts M-12S Manuel utilisateur

NOCH

NOCH 14261 Manuel utilisateur

Hausler

Hausler 450 SE V2 Manuel utilisateur

Dynaflite

Dynaflite Daydream Manuel utilisateur

MiniacRC

MiniacRC MIGHTY MINI P40 WARHAWK Manuel

Kenner

Kenner Batman 63651 Manuel utilisateur

LEGO

LEGO 8527 Manuel utilisateur

iKarus

iKarus ECO 8 Manuel utilisateur

Multiplex

Multiplex EasyStar II Mode d’emploi

Walkera

Walkera 38 Mode d’emploi

Hasbro

Hasbro TRANSFORMERS BUMBLEBEE Manuel utilisateur

MD MXION SWD Manuel utilisateur

Mattel

Mattel Disney Pixar Cars Cozy Cone Spiral Rampway Manuel utilisateur

marklin

marklin 39671 Manuel utilisateur

Meccano

Meccano 15103 Manuel utilisateur

LEGO

LEGO TECHNIC 8735 Manuel utilisateur