GRASS VALLEY NETCONFIG V2.0.12 Manuel utilisateur

NetConfig

NETWORKING CONFIGURATION APPLICATION

Instruction Manual

Software Version 2.0.12

071819003

AUGUST 2010

Affiliate with the N.V. KEMA in The Netherlands

CERTIFICATE

Certificate Number: 510040.001

The Quality System of:

Thomson Inc, and its worLdwide Grass Valley division affiliates DBA

GRASS VALLEY

Headquarters

400 Providence Mine Rd

Nevada City, CA 95959

United States

15655 SW Greystone Ct.

Beaverton, OR 97006

United States

10 Presidential Way

Suite 300

Woburn, MA 01801

United States

Kapittelweg 10

4827 HG Breda

The Nederlands

7140 Baymeadows Way

Ste 101

Jacksonville, FL 32256

United States

2300 So. Decker Lake Blvd.

Salt Lake City, UT 84119

United States

Rue du Clos Courtel

CS 31719

35517 Cesson-Sevigné Cedex

France

1 rue de l’Hautil

Z.I. des Boutries BP 150

78702 Conflans-Sainte

Honorine Cedex

France

Technopole Brest-Iroise

Site de la Pointe du Diable

CS 73808

29238 Brest Cedex 3

France

40 Rue de Bray

2 Rue des Landelles

35510 Cesson Sevigné

France

Spinnereistrasse 5

CH-5300 Turgi

Switzerland

Brunnenweg 9

D-64331 Weiterstadt

Germany

Carl-Benz-Strasse 6-8

67105 Schifferstadt

Germany

Including its implementation, meets the requirements of the standard:

ISO 9001:2008

Scope:

The design, manufacture and support of video and audio hardware and software products and

related systems.

This Certificate is valid until: June 14, 2012

This Certificate is valid as of: June 14, 2009

Certified for the first time: June 14, 2000

H. Pierre Sallé

President

KEMA-Registered Quality

The method of operation for quality certification is defined in the KEMA General Terms

And Conditions For Quality And Environmental Management Systems Certifications.

Integral publication of this certificate is allowed.

KEMA-Registered Quality, Inc.

4377 County Line Road

Chalfont, PA 18914

Ph: (215)997-4519

Fax: (215)997-3809

CRT 001 073004

Accredited By:

ANAB

NetConfig

NETWORKING CONFIGURATION APPLICATION

Instruction Manual

Software Version 2.0.12

071819003

AUGUST 2010

4 NetConfig — Instruction Manual

Contacting Grass Valley

International

Support Centers

France

24 x 7 +800 8080 2020 or +33 1 48 25 20 20 United States/Canada

24 x 7 +1 800 547 8949 or +1 530 478 4148

Local Support

Centers

(available

during normal

business hours)

Asia

Hong Kong, Taiwan, Korea, Macau: +852 2531 3058 Indian Subcontinent: +91 22 24933476

Southeast Asia/Malaysia: +603 7805 3884 Southeast Asia/Singapore: +65 6379 1313

China: +861 0660 159 450 Japan: +81 3 5484 6868

Australia and New Zealand: +611300 721 495 Central/South America: +55 11 5509 3443

Middle East: +971 4 299 64 40 Near East and Africa: +800 8080 2020 or +33 1 48 25 20 20

Europe

Belarus, Russia, Tadzikistan, Ukraine, Uzbekistan: +7 095 2580924 225 Switzerland: +41 1 487 80 02

S. Europe/Italy-Roma: +3906 87 20 35 28 -Milan: +39 02 48 41 46 58 S. Europe/Spain: +34 91 512 03 50

Benelux/Belgium: +32(0) 2 334 90 30 Benelux/Netherlands: +31 (0) 35 62 38 42 1 N. Europe: +45 45 96 88 70

Germany, Austria, Eastern Europe: +496150 104 444 UK, Ireland, Israel: +44 118 923 0499

This product may be covered by one or more U.S. and foreign patents.

Grass Valley Web Site

The www.grassvalley.com web site offers the following:

Online User Documentation — Current versions of product catalogs, brochures,

data sheets, ordering guides, planning guides, manuals, and release notes

in .pdf format can be downloaded.

FAQ Database — Solutions to problems and troubleshooting efforts can be

found by searching our Frequently Asked Questions (FAQ) database.

Software Downloads — Download software updates, drivers, and patches.

NetConfig — Instruction Manual 5

Contents

NetConfig . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

NetConfig Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

NetConfig Scope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Important Security Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Device Software Load Background Information . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Before You Start. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Hardware and Software Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Windows 7 Requirements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Installing NetConfig . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Plug-In Licensing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

NetConfig Versions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

NetConfig Installation Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

NetConfig Shortcut . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

NetConfig PC Configuration with Two NICs. . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Setting Default Gateway . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Using NetConfig . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Device Discovery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Network Views . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Expanding Branches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Device Status. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Copy Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Identifying A Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Device Properties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Accessing Device Web Pages. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Web Address (URL) Field . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

About (NetConfig). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Refresh Browser. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Using The Facility View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Creating/Inserting New Tree Branches in Facility View . . . . . . . . . . . . . . . . 25

Renaming Tree Branches in Facility View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Deleting Tree Branches or Devices in the Facility View . . . . . . . . . . . . . . . . . 26

Placing Devices in the Facility View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Rearranging Devices in the Facility View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Associating a Branch in Facility View with a User-Defined Link . . . . . . . . . 26

Inventory Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Export to Excel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Export as CVS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Keystroke Shortcuts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Configuring Devices Using NetConfig . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Setting IP Addresses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Resolving Duplicate IP Addresses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Loading Device Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

NetConfig Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Health Checker . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

6 NetConfig — Instruction Manual

Contents

Device Identification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Tool Bar Views . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Views . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

NetConfig Plug-Ins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Index. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

NetConfig — Instruction Manual 7

NetConfig

Introduction

NetConfig (Networking Configuration Application) is a multipurpose soft-

ware component for managing NetConfig-enabled Grass Valley devices.

Grass Valley products that currently use NetConfig include:

• Kameleon and Gecko Modules and Newton Panels,

• Encore and Prelude Routing Systems,

• M-2100 Mini Master Control Panel,

• Grass Valley Camera CCUs,

• Kayenne Switchers, and

• Kalypso and Zodiak Switcher Remote Aux Panels.

As Grass Valley develops new product this list will grow.

NetConfig Features

The NetConfig application is designed to make network configuration

simple.

• NetConfig discovers devices on the network, and these devices can

have their IP addresses configured remotely using the PC on which

NetConfig has been installed,

• NetConfig reports duplicate IP addresses, which can be easily resolved,

• NetConfig is used to install software to these devices,

• NetConfig can be used to identify devices, by blinking their LEDs or

panel buttons,

• NetConfig incorporates a web browser that displays web pages served

by the devices on the network,

• NetConfig provides rudimentary health checks of these devices, and

• NetConfig provides inventory tools for equipment management.

Application specific NetConfig plug-ins are also available for use with

various Grass Valley products (for example, Newton and Prelude). Each

plug-in provides special functionality for that product.

NetConfig — Instruction Manual 8

Introduction

NetConfig Scope

The NetConfig application uses a client-server model. The NetConfig

application acts as the server and sends out Requests to client devices,

which send Responses.

The NetConfig discovery process employs Ethernet broadcast messages.

This process works only when the NetConfig-enabled devices are on the

same LAN; that is, either connected directly, or connected via a hub or

switch. Broadcast messages do not normally propagate through router

gateways, so devices on a WAN are not normally discovered (see Figure 1).

Figure 1. Network Topology and Broadcast Messages

Hub

8190_01_r0

Control Panel

Ethernet

Switch

Ethernet Router

(default Gateway address)

Board 1

Board 2

Board 3

Board 4

Ethernet

Switch

Uplink

Broadcast Message

Response Message

Encore

Controller

with Relay Agent8900 Modular

Frame

with Net Card

Ethernet

Switch

Ethernet

Switch

NetConfig

Via Uplink or

Relay Agent all

Control Panels

are onthe same

Network and respond

to NetConfig.

NetConfig sends

Broadcast Discovery

messagesand sees

devicesthat respond.

Routermay ormay not

be configured with

IP Helperto pass

Broadcast messages.

Net Card in

ModularFrame

respondsand

relaysBoard

statusesto

NetConfig

Control Panelsare

NOT seenby NetConfig

unless default Gateway

Routerisusing IP Helper.

Note We generally recommend using unmanaged switches, instead of hubs, on

networks. A hub may be used with a single device to extend beyond the

Ethernet 100 meter limit. We do not recommend attaching multiple devices

to a hub since this commonly introduces Ethernet message collisions that

can affect overall system performance.

On some routers, IP Helper can be enabled to propagate broadcast mes-

sages. These messages are then sent as subnet broadcasts for a particular

port. If a device is configured on a subnet that matches IP Helper, then it

will receive and respond to broadcast messages. However, if the device is

completely unconfigured or misconfigured, it will not receive the broadcast

message even if IP Helper is enabled.

NetConfig — Instruction Manual 9

Introduction

In summary, NetConfig works on a flat, isolated LAN without the need for

special network configuration. To work properly in any other network

topology, network system configuration outside the scope of this manual

may be required. Work with your network administrator if you wish to use

NetConfig in other network environments.

Important Security Information

The NetConfig application is a powerful tool. A NetConfig user can easily

change the IP addresses of NetConfig compliant devices on a network, and

can change the software installed on those devices. For responsible facility

engineering staff these capabilities are extremely useful for bringing up and

configuring systems. A person with malicious intent, however, can use

these same capabilities to take any or all NetConfig compliant devices on

the network offline, possibly seriously disrupting facility operations.

It is assumed that those using NetConfig are indeed legitimate authorized

users, and are working in premises which are physically secure/restricted

and protected from extraneous network penetration, either by physical iso-

lation or behind a company firewall.

Device Software Load Background Information

NetConfig can be used by several different Grass Valley product lines to

load software to various devices over the network. The same NetConfig

application software is used by all the product lines, but different kinds of

device software will need to be loaded to different devices. Identifying

what type and version of software is available to NetConfig to load is

accomplished using separate files included with each specific product line

release. These files provide NetConfig paths to the locations of the software

appropriate for each device. Only the path and software files for that par-

ticular product line will be included in the NetConfig software bundled

with that product’s software releases. These files are installed onto the PC

along with the NetConfig application itself.

In earlier versions of NetConfig, files appended with .sw3 were used to

identify the type and location of device software. In newer versions, .xml

files are used. NetConfig supports either or both mechanisms. The organi-

zational tree structure displayed by NetConfig from which you choose

which software version to load is determined by these files.

For example, if you install the NetConfig application provided with one

product, and then install NetConfig provided with a different product, the

new product’s .xml or .sw3 files are simply added to that PC, and do not

overwrite files of the other product line. NetConfig can still load the other

product’s software to those devices. The software load tree structure will

show both the new product line device software and the previous product

line device software.

NetConfig — Instruction Manual 10

Before You Start

NetConfig presumes some degree of customer-furnished equipment (CFE)

and software in order to complete the system. This equipment typically

includes one or more personal computers (PCs), an Ethernet switch or

switches, and category 5 UTP Ethernet cabling with RJ-45 connectors.

Hardware and Software Requirements

You can run NetConfig on the PC or one of the PCs already running other

Grass Valley software for your system. Alternatively, you can run Net-

Config on a separate PC connected to your Grass Valley network.

Depending on the system deployed, the PC can be used to accomplish

many tasks. These tasks range from running a simple client application to

complete control and configuration of an entire system.

To run NetConfig you will need:

• Windows 2000 SP4, Windows XP SP2, or Windows 7 and above oper-

ating system,

• to be logged in with Administrator-level privileges for the local

machine, and

• have Internet Explorer version 5.5 or later installed.

Windows 7 Requirements

If your PC is running Windows 7, opening the NetConfig application by

clicking the shortcut may display an error message: Health check pings dis-

abled, which indicates the application needs administrator access. This can

be accomplished in various ways”

Permanent Application Administrator Access

• Right click on the program shortcut, then click on Properties and on the

Compatibility tab, check the Run this program as an administrator box, and then

click OK.

-or-

• Right click on the program shortcut, then click on Properties. Click on the

Shortcut tab for a program shortcut, then click on the Advanced button.

Check the Run as an administrator box, and then click OK.

Current Session Only Administrator Access

• Right click on the program shortcut or program .exe file, and click on

Run as administrator.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels GRASS VALLEY Logiciel

GRASS VALLEY

GRASS VALLEY GECKOFLEX Manuel utilisateur

GRASS VALLEY

GRASS VALLEY AURORA BROWSE 7 Manuel utilisateur

GRASS VALLEY

GRASS VALLEY KAYAK HD Manuel utilisateur

GRASS VALLEY

GRASS VALLEY K2 DYNO PA - V1.5 Manuel utilisateur

GRASS VALLEY

GRASS VALLEY KAYENNE 2.0 - S 10-2010 Mode d’emploi

GRASS VALLEY

GRASS VALLEY EDIUS 6 Mode d’emploi

GRASS VALLEY

GRASS VALLEY EDIUS VERSION 5.1 Fiche d'information produit

GRASS VALLEY

GRASS VALLEY CONCERTO 1.7.6.1 - REV 10-2009 Manuel utilisateur

GRASS VALLEY

GRASS VALLEY AURORA EDIT - S AND UPGRADE INSTRUCTIONS... Guide de démarrage rapide

GRASS VALLEY

GRASS VALLEY MEDIAEDGE3 DCM Manuel utilisateur

GRASS VALLEY

GRASS VALLEY EDIUS SP Manuel utilisateur

GRASS VALLEY

GRASS VALLEY EDIUS 6 Mode d’emploi

GRASS VALLEY

GRASS VALLEY EDIUS 4 LICENSE MANAGER - APPLICATION NOTE... Instructions d'installation et d'utilisation

GRASS VALLEY

GRASS VALLEY MAESTRO 1.4 RELEASE NOTES Mode d’emploi

GRASS VALLEY

GRASS VALLEY AURORA PLAYOUT - S AND UPGRADE INSTRUCTIONS... Guide de démarrage rapide

GRASS VALLEY

GRASS VALLEY KAYENNE - S V3.0 Mode d’emploi

GRASS VALLEY

GRASS VALLEY K2 SUMMIT Manuel utilisateur

GRASS VALLEY

GRASS VALLEY K2-AVID TRANSFER MANAGER Manuel utilisateur

GRASS VALLEY

GRASS VALLEY K2 FCP CONNECT 2.0 - RELEASE NOTES Mode d’emploi

GRASS VALLEY

GRASS VALLEY KAYAK HD-SD Manuel utilisateur

GRASS VALLEY

GRASS VALLEY K2 7.3.8 - S AND Manuel utilisateur

GRASS VALLEY

GRASS VALLEY AURORA EDIT - INSTALLATION V7.1 Manuel utilisateur

GRASS VALLEY

GRASS VALLEY EDIUS 4 LICENSE MANAGER - APPLICATION NOTE... Instructions d'installation et d'utilisation

GRASS VALLEY

GRASS VALLEY JUPITER SOFT PANELS Manuel utilisateur

Manuels Logiciel populaires d'autres marques

COMPRO

COMPRO COMPROFM Manuel utilisateur

Muratec

Muratec OFFICEBRIDGE ONLINE Manuel utilisateur

Oracle

Oracle Contact Center Anywhere 8.1 Manuel utilisateur

Adobe

Adobe 65007312 - Photoshop Lightroom Manuel

Avaya

Avaya NULL One-X for RIM Blackberry Manuel utilisateur

HP ProLiant BL420c Manuel utilisateur

PS Audio

PS Audio PowerPlay Manuel du propriétaire

Brady

Brady LOCKOUT PRO 3.0 Manuel de service

Avaya

Avaya Interaction Center Manuel utilisateur

Texas Instruments

Texas Instruments TI-83 Plus Silver Edition Manuel

Novell

Novell GROUPWISE 8 - INTERNET AGENT Manuel utilisateur

Oracle

Oracle Application 9i Manuel utilisateur

Acer

Acer RDM Manuel utilisateur

Canon

Canon Vixia HF21 Manuel utilisateur

Canon

Canon ZR950 Manuel utilisateur

Samsung

Samsung Auto Backup Manuel utilisateur

Polycom

Polycom Vortex EF2201 Instructions d'installation et d'utilisation

Brocade Communications Systems

Brocade Communications Systems Brocade 8/12c Manuel utilisateur