GrainPro Solar Bubble Dryer 50 Manuel utilisateur

GRAINPRO® SOLAR BUBBLE DRYER™50

INSTRUCTION MANUAL

MA4040RAD0914-9

2/37

GrainPro® Solar Bubble Dryer™50 Instruction Manual

MA4040RAD0914-9

GrainPro®, Inc.

200 Baker Ave., Suite 309 Concord, MA 01742 USA

Phone: +1 978 371 7118 Fax: +1 978 371 7411 Website: www.grainpro.com

Email: [email protected]

GrainPro® Philippines, Inc.

Lot 46 Efficiency Avenue, SubicBay Gateway Park I, SubicBay Freeport Zone 2222 Philippines

Phone: +63 47 252 7884 Fax: +63 47 252 7885 Website: www.grainpro.com

Email: salesasia@grainpro.com

GrainPro® Kenya

Shop A2, Space Apartments Mai Mahiu Road, Near T Mall Nairobi, KENYA

Phone: +254 710 933 717 Website: www.grainpro.com

Email: saleseafrica@grainpro.com

GrainPro® Mexico

Cto. Garona No. 903, SecciónTres, Col. Amberes, 37237, León, Gto. Mexico

Phone (Mobile): +52 1 (477) 392-0851 Website: www.grainpro.com

Email: guillermo@grainpro.com

GrainPro® Costa Rica

Paseo Colón, Centro Colón, en Bufete Robles Oreamuno District Merced, San José, Costa Rica

Phone: +506 4701-1173Website: www.grainpro.com

Email: [email protected]m

GrainPro® India Postharvest Technology Pvt Ltd

B305, Grande View 7 Hsg. Soc. Ltd., Phase - I, Near Ashok Leyland, Ambegaon BK, PUNE,

Pune, Maharashtra, India, 411046

Phone (Mobile): +91 9970157263Website: www.grainpro.com

Email: [email protected]

3/37

GrainPro® Solar Bubble Dryer™50 Instruction Manual

MA4040RAD0914-9

TABLE OF CONTENTS

1. INTRODUCTION ........................................................................................................................................ 4

2. CHECKLIST................................................................................................................................................. 5

3. COMPONENTS .......................................................................................................................................... 8

4. SPECIFICATIONS........................................................................................................................................ 8

5. ASSEMBLY AND OPERATING PROCEDURES.............................................................................................. 9

Site selection....................................................................................................................................... 9

Installation .......................................................................................................................................... 9

Wiring connection and electrical safety for SBD50-Solar................................................................. 13

Wiring connection and electrical safety for SBD50-Electric ............................................................. 18

Loading ............................................................................................................................................. 18

Closing .............................................................................................................................................. 19

Fixing wall with support loops .......................................................................................................... 19

Ventilator management ................................................................................................................... 19

Mixing ............................................................................................................................................... 20

Unloading ......................................................................................................................................... 21

6. MAINTENANCE AND CARE ..................................................................................................................... 21

Repairing punctures and other damages ......................................................................................... 21

Cleaning the top cover and bottom section ..................................................................................... 22

Body folding instruction ................................................................................................................... 22

Battery charging, maintenance and storage .................................................................................... 23

Safekeeping ...................................................................................................................................... 24

Recycling........................................................................................................................................... 24

Platform installation of Rodent Guard ............................................................................................. 24

7. TROUBLE SHOOTING: SBD-SOLAR WIRING HARNESS ............................................................................ 25

Case 1: Battery indicator status is “steady off” ................................................................................ 25

Case 2: Battery indicator status is “slow flashing” ........................................................................... 26

Case 3: Battery indicator status is “quick flashing” .......................................................................... 27

Case 4: Solar Panel/Charge indicator is “steady off”........................................................................ 28

Case 5: Solar Panel/Charge indicator is “quick flashing” (system over voltage) .............................. 29

Case 6: Load indicator is “steady on but there is no output”........................................................... 30

Case 7: Load indicator is “steady off” ............................................................................................... 31

Case 8: Load indicator is “slowly flashing and there is no output” .................................................. 32

Case 9: Load indicator is “quick flashing and there is no output” .................................................... 33

Case 10: Solar charge controller is not working properly ................................................................ 34

8. FREQUENTLY ASKED QUESTIONS AND ANSWERS .................................................................................. 35

9. WARRANTY CLAUSE................................................................................................................................ 37

4/37

GrainPro® Solar Bubble Dryer™50 Instruction Manual

MA4040RAD0914-9

1. INTRODUCTION

The GrainPro® Solar Bubble Dryer™ 50 (SBD50) is a collapsible,tunnel-type dryer with 1.0 metric ton

(1,000kg) drying capacity designed to protect the agricultural commodity from intermittent/sudden rains

during drying, and to prevent spillage and contamination. Drying performance is dependent on the solar

radiation, relative humidity of the ambient air, and moisture content of concerned agricultural

commodity. The SBD50 consist of a transparent cover made of UV-resistant polyethylene film connected

to the black reinforced PVC drying floor by a heavy-duty zipper. Through the transparent top cover, solar

radiation enters the drying chamber and heats up the agricultural commodity being dried. Moisture

content is then vaporized and pushed by the ventilators out from the drying chamber.

The SBD50 technology makes drying possible even during unpredictable weather conditions. It can dry

grains and seeds at an average drying rate of 0.5% per hour based on paddy and corn. However, during

full sunny conditions drying time is about 6 to 8 hours on a moisture content of 22% to 14%. It is a multi-

crop dryer that can be used to dry paddy, corn, coffee, and others.

There are two GrainPro SBD50 commercial models, namely: SBD50-Solar which operates purely on solar

energy to dry the commodity and run the ventilators. While the SBD50-Electric uses electric power from

the grid to run the ventilators and solar energy to dry the commodity. There is a rake mixer that can be

used in all terrain and a tube mixer (optional mixing device) which provides undulating motion during

mixing operation.

1.1. FEATURES:

1.1.1. Collapsible dryer can be installed on any flat surface, a multi-commodity dryer.

1.1.2. Protects the commodity being dried from sudden rains, spillage, and contamination.

1.1.3. Protects the commodity from fowls, birds, and other animals.

1.1.4. Protects the commodity from unhealthy and hazardous contaminants.

1.1.5. Designed to address the effect of climate change.

1.1.6. The SBD50-Solar doesn’t use fossil fuel that contributes to greenhouse gases.

1.2. PRODUCT GUARANTEE:

1.2.1. In accordance with the terms and conditions herewith, GrainPro, Inc. fully guarantees the quality of this

product provided it is used according to the instructions in this manual.

1.2.2. Please read and understand the manual thoroughly before using the Solar Bubble Dryer50.

1.3. COMMENTS, COMPLAINTS, AND/OR CLARIFICATIONS:

1.3.1. Please contactcustomercare@grainpro.com.

1.3.2. We shall be glad to answer any of your questions.

5/37

GrainPro® Solar Bubble Dryer™50 Instruction Manual

MA4040RAD0914-9

2. CHECKLIST

Please inspect your GrainProSBD50 package to ensure it includes the following items:

PART NAME

DESCRIPTION

IMAGE

2.1. CARRY BAG

2.1.1. Contents:

a. SBD50 (Drying

floor and Top

cover)

b. Ventilator cover

2.2. SBD50-SOLAR OR

SBD50-ELECTRIC

2.2.1. UV-resistant water

proof and transparent

top cover (UV-LDPE).

2.2.2. Drying floor made of

black reinforced PVC

(610gsm).

2.3. REPAIR TAPE

2.3.1. PE repair tape, UV

resistant and

transparent- for

repair/ patching of the

top cover.

2.3.2. PVC duct tape, Grey-

for the drying floor.

2.4. SMALL PARTS

2.4.1. Cable ties.

2.4.2. Screw driver.

2.4.3. Bolts and winged nuts.

2.4.4. LDPE Rodent Guard.

2.5. RAKE MIXER

2.5.1. Consists of the handle

[designed in three (3)

pieces joined by

couplers], and the rake

head with teeth.

One (1) unit

2.6. TUBE MIXER

(OPTIONAL)

2.6.1. Disassembled mixing

device, consists of

three (3) parts,

One (1) unit

6/37

GrainPro® Solar Bubble Dryer™50 Instruction Manual

MA4040RAD0914-9

2.6.2. Offset Box Wrench,

Two (2) pieces

2.7. AC VENTILATOR

2.7.1. 220V AC ventilators.

Two (2) units for

SBD50-Electric

2.8. DC VENTILATOR

2.8.1. 12V DC ventilators.

Two (2) units for

SBD50-Solar

2.9. VENTILATOR

FRAME

2.9.1. Supporting aluminum

clamp to hold the

ventilator.

Two (2) sets

2.10. SOLAR PANELS

2.10.1.Used to convert light

into electricity, 12V.

Two (2) units

2.11. SOLAR PANEL

SUPPORT FRAME

2.11.1.Supporting aluminum

structure for the solar

panels.

2.11.2.Two (2) legs

2.11.3.Two (2) brackets

2.11.4.One (1) horizontal

brace

7/37

GrainPro® Solar Bubble Dryer™50 Instruction Manual

MA4040RAD0914-9

2.12. EXHAUST

SUPPORT FRAME

2.12.1.Supporting aluminum

structure for the SBD

exhaust port.

One (1) assembly

2.13. WIRING HARNESS

2.13.1.Electrical components

of SBD50-Solar with

solar charge

controller, PWM DC

motor speed

controller and toggle

switch.

One (1) assembly

2.14. EXTENSION CORD

2.14.1.Extension wire for

SBD50-Electric.

Ten (10) meter

2.15. AGM BATTERY

(OPTIONAL)

2.15.1.Used to store energy

to run the ventilator of

SBD50-Solar

70 Ampere-hour

One (1) unit

2.16. RODENT GUARD

2.16.1.For platform post to

prevent rodent access

when storing the

empty SBD.

Four (4) pieces per

pack

2.17. INSTRUCTION

MANUAL

2.17.1.Installation

instructions.

2.17.2.Maintenance

instructions.

2.17.3.Frequently asked

questions and

answers.

2.17.4.Warranty clause.

8/37

GrainPro® Solar Bubble Dryer™50 Instruction Manual

MA4040RAD0914-9

3. COMPONENTS

4. SPECIFICATIONS

PARAMETERS

SBD50

SOLAR

ELECTRIC

Top Cover

UV-LDPE, Transparent

Drying Floor

Reinforced PVC, black

Zipper

Heavy duty zipper

Rake Mixer

Plastic rake with wooden handle, 2.2m length

Tube/Roller Mixer**

G.I. Pipe, 2” Ø w/ 2 pcs. Offset box wrench, 17 x19mm

Frames

Ventilator frame

Aluminum bars

Exhaust Support Frame

Aluminum bars

Solar panel frame

Aluminum profiles

N/A

Ventilator

12V DC Ventilator, 2 units

220V AC Ventilator, 2units

Solar Panel

100W, 2 units

N/A

Wiring Harness

Auto wire, SCC, PWM, Switch,

Extension Wire, 10m

Connectors/ Terminals

Alligator Clip

N/A

Battery**

AGM (Absorbed Glass Mat)

Battery

N/A

Transformer*

N/A

Step up transformer

Dimension, m (ft) (L x W)

26.0x2.0 (85.3x6.56)

Drying Area, m2(ft2)

50.0 (538.2)

Capacity (based on Paddy), kg (lbs)

1,000 (2,204.62)

Included for the countries with 110V electric energy supply

Optional purchase

9/37

GrainPro® Solar Bubble Dryer™50 Instruction Manual

MA4040RAD0914-9

5. ASSEMBLY AND OPERATING PROCEDURES

5.1. SITE SELECTION

5.1.1. In selecting the site, look for:

a. A level ground away from standing or

running water.

b. Open area for maximum absorption of

solar radiation.

5.1.2. Preparing the selected site (about 4m x 30m) by:

a. Clear away all sharp and/or pointed objects (stones, broken glass, nail, etc.) which might puncture

the SBD50 drying floor. In addition, refrain from smoking while working because hot ashes may

damage the SBD50 materials.

b. Make sure there is sufficient space around the SBD50 for pulling the “Tube Mixer”on both sides of

the dryer.

c. The positioning of the SBD50 and solar panel should be on a location where maximum exposure to

solar radiation can be obtained.

5.2. INSTALLATION

5.2.1. Set-up/installation:

a. Unfold the SBD50. Take note of the folding

pattern while it is being unfolded. This

unfolding sequence should be followed in

reverse when preparing for proper

storage.

b. Pull the other end to get rid of the folds

before laying to the ground. Make sure

that the drying floor is properly stretched

at two meters wide (for the drying area)

along the full length of the SBD50. This will

ensure that the drying floor will stay flat

when using the “Tube mixer”.

5.2.2. Ventilator and supporting structures:

COMPONENT

IMAGE

SEQUENCE OF ASSEMBLY

a. Ventilator,

Two (2) units

1) Loosen the horizontal brace (d) of the

frame.

2) Insert the ventilator cover (b) at the upper

portion of the ventilator (a).

b. Ventilator cover,

Two (2) pieces

10/37

GrainPro® Solar Bubble Dryer™50 Instruction Manual

MA4040RAD0914-9

c. Ventilator

support clamp,

Two (2) pieces

3) Assemble the ventilator support legs (e)

using bolts and winged nuts (f) using the

screw driver provided.

4) Position the ventilator support legs under

the sand bags (fill in the provided sand bag

first and fold the other part under it). Sand

bag is located along the heating area

extension of the drying floor.

5) Connect the ventilator to the SBD50 body.

Make sure that the direction of airflow is

correct (see the arrow printed on the

ventilator).

d. Horizontal brace,

Two (2) pieces

e. Ventilator

support legs,

Four (4) pieces

f. Bolts and winged

nuts,

Four (4) sets

g. Hex nuts,

Four (4) pieces

5.2.3. SBD Solar panel and support assembly:

COMPONENT

IMAGE

SEQUENCE OF ASSEMBLY

a. Solar panel,

Two (2) units

1) Assemble the brackets at the top and

bottom side attaching the two (2) solar

panels.

b. Bracket,

Two (2) pieces

Table des matières

Autres manuels GrainPro Kit de serre

GrainPro

GrainPro MA4040RAD0914-10 Manuel utilisateur

Manuels Kit de serre populaires d'autres marques

ACD PRESTIGE

ACD PRESTIGE MR3 H Manuel utilisateur

Vitavia

Vitavia VA0040-TRP Manuel utilisateur

VegTrug

VegTrug Nursery Manuel utilisateur

Riverstone Networks

Riverstone Networks Monticello 041315V Manuel utilisateur

STC

STC Easy Grow 6x12 Greenhouse Manuel utilisateur

CLIMA POD

CLIMA POD Spirit V7 Series Manuel utilisateur

Vitavia

Vitavia GAIA JUMBO Manuel utilisateur

Palram

Palram Harmony 6'x4' Manuel utilisateur

ClearSpan

ClearSpan Storage Master 104598 Manuel utilisateur

Sproutwell

Sproutwell GRANGE - 5 Manuel utilisateur

ACD

ACD Piccolo 03 Manuel utilisateur

Growhouse

Growhouse Lean To 6 x 8 Manuel utilisateur

Riverstone Networks

Riverstone Networks Grower's 181010V Manuel utilisateur

GrowSpan

GrowSpan 500 Series Manuel utilisateur

Robinsons

Robinsons 5ft Wide LEAN-TO Manuel utilisateur

Botanica

Botanica E Manuel utilisateur

PNI

PNI SP6000 Manuel utilisateur

Hortus

Hortus 211-203 Manuel de programmation