Graco EP2 Manuel utilisateur

Table des matières

Autres manuels Graco Pompe à eau

Graco

Graco TRITON 3D350HP Manuel d'utilisation

Graco

Graco Falcon A Series Manuel utilisateur

Graco

Graco SaniForce 5:1 Manuel de la liste des pièces

Graco

Graco Dyna-Star 200:1 Manuel utilisateur

Graco

Graco SaniForce 3250 Mode d’emploi

Graco

Graco Husky D71 Series Manuel d'utilisation

Graco

Graco 244195 Mode d'emploi

Graco

Graco Series A Manuel utilisateur

Graco

Graco Wolverine A261 Series Manuel d'utilisation

Graco

Graco Fire-Ball 205626 Manuel d'utilisation

Graco

Graco Fire-Ball 300 Manuel utilisateur

Graco

Graco 115 VAC EGP Manuel utilisateur

Graco

Graco Fire-Ball J Series Manuel d'utilisation

Graco

Graco Spindl-Gard SG-1 Manuel d'utilisation

Graco

Graco Python XL-DA25 Series Manuel de la liste des pièces

Graco

Graco ChemSafe 307 Manuel de la liste des pièces

Graco

Graco Fireball 225 Manuel d'utilisation

Graco

Graco SaniForce 1040e Manuel d'utilisation et d'entretien

Graco

Graco PRESIDENT 207-706 Manuel d'utilisation

Graco

Graco Series A Guide de configuration

Graco

Graco PRESIDENT 205-626 Manuel d'utilisation

Graco

Graco C Series Manuel d'utilisation

Graco

Graco Monark C Series Manuel d'utilisation

Graco

Graco Z-Pump S1 Series Manuel de la liste des pièces

Manuels Pompe à eau populaires d'autres marques

Neptun

Neptun NPHW 5500 Manuel utilisateur

Sensidyne

Sensidyne Gilian BDX-II Instructions d'installation et d'utilisation

Draper

Draper 47808 Manuel utilisateur

Trolla

Trolla 12820 Manuel utilisateur

Sunfab

Sunfab SVH Series Manuel utilisateur

WilTec

WilTec 50740 Manuel utilisateur

Fieldmann

Fieldmann FVC 5015 EK Manuel utilisateur

Everbilt

Everbilt EFSUB5-122HD Manuel utilisateur

esotec

esotec 101018 Manuel utilisateur

moyno

moyno 2000 CC Manuel utilisateur

Becker

Becker BASIC VASF 2.80/1-0.AC230 Manuel utilisateur

Sykes AmeriPumps

Sykes AmeriPumps GP100M Guide de dépannage

DUROMAX

DUROMAX XP WX Series Manuel utilisateur

BRINKMANN PUMPS

BRINKMANN PUMPS SBF550 Manuel utilisateur

Franklin Electric

Franklin Electric IPS Manuel utilisateur

Xylem

Xylem e-1532 Series Manuel utilisateur

Milton Roy

Milton Roy PRIMEROYAL Manuel utilisateur

STA-RITE

STA-RITE ST33APP Manuel utilisateur

Pump Assembly Instructions

EP2 Hose Pump Assembly 406953B

EN

To assemble the roller kit to an EP2 Hose Pump.

For professional use only.

NOTE: Parts included in the kit are marked with an asterisk (*).

See your EP2 Hose Pump Repair Manual for a complete list of

Kit Part Numbers.

1. Remove the cover (12) and gasket (11).

2. Pull the hose out of the bottom of the housing (103) at the

6 o’clock position.

3. Move the eccentric shaft (7) to the 6 o’clock position.

4. Lubricate the eccentric shaft (7) with hose lube. Install

the roller (102*) and the roller retaining ring (8*).

5. Turn the motor fan to move the roller (102) to the 12

o’clock position. Push the hose (103) into the housing.

Use a rubber mallet if the hose is difficult to seat.

Continued.

TI18220a

12

11

1

Lubricate with hose lube.

1

TI18221a

7

8*

102*

TI18224a

102

103

Important Safety Instructions

Before beginning, read all warnings and instructions in this manual

and in your related equipment manuals. Save all instructions. This

manual is only a guide for kit installation. See your EP2 Hose Pump

manual for complete warnings and repair instructions.

All written and visual data contained in this document reflects the latest product information available at the time of publication.

Graco reserves the right to make changes at any time without notice.

Original instructions. This manual contains English. MM 406953

Graco Headquarters: Minneapolis

International Offices: Belgium, China, Japan, Korea

GRACO INC. AND SUBSIDIARIES • P.O. BOX 1441 • MINNEAPOLIS, MN 55440-1441 • USA

Copyright 2011, Graco Inc. All Graco manufacturing locations are registered to ISO 9001.

www.graco.com

Revised June 2012

6. Return the roller (102) to the 6 o’clock position, com-

pressing the hose. It is critical that the roller is at the bot-

tom of the pump to ensure the correct capacity of hose

lube. Reinstall the motor fan cover.

7. Install the gasket (11) and front cover (12). Install the

screws (14) and washers (13). Torque oppositely to 25

in-lb (2.8 N•m).

NOTE: Do not over-tighten the front cover screws. This will

cause the gasket to deform and the pump to leak.

8. Add hose lube as explained in your EP2 Pump Repair

Manual.

NOTICE

The roller must be returned to the 6 o’clock position before

installing the front cover. Failure to do so will result in overfill-

ing the pump with hose lube.

TI18225a

12

11

13

14

102

3

Torque oppositely to

25 in-lb (2.8 N•m).

3