6
d. Avoid running the engine indoors. The exhaust gases contain harmful carbon monoxide.
e. Never use your brush cutter under circumstances like those
described below:
1. When the ground is slippery or when other conditions
exist which might make it not possible to maintain a
steady posture while using the brush cutter.
2. At night, at times of heavy fog or at any other times
when your field of vision might be limited and it would be difficult to gain a clear
view of area.
3. During rain storms, during lightning storms. At times of strong or gale –force winds,
or at any other times when weather conditions might make it unsafe to use this
product.
f. When using this product for the first time. Before beginning actual work. Then handling the
brush cutter from skilled worker.
g. Lack of sleep, tiredness or physical exhaustion results in lower attention spans, and this
in turn leads to accidents and injury. Limit the amount of time over which the brush cutter
is to be used continuously to somewhere around 30-40 minutes per session, and take
10-20 minutes of rest between work sessions. Also try to keep the total amount of work
performed in a single day under 2 hours or less.
h. Be sure to keep this manual handy so that you may refer to it later whenever any questions
arise.
i. Always be sure to include this manual when selling, lending or
otherwise transferring the ownership of this product.
j. Never allow children or anyone unable to fully understand the
directions given in this manual to use this brush cutter.
WORKING GEAR AND CLOTHING
a. When using your brush cutter, you should wear proper
clothing and protective equipment as follows.
(1) Helmet
(2) Protection goggles or face protector
(3) Thick work gloves
■BEFORE UES THE MACHINE
a. Read this owner’s manual carefully to understand how to operate this unit properly.
b. This product has been designed for use in cutting weed, brush, small tress and
similar vegetation. It should never be used for any other purpose since doing
so could result in unforeseen accidents and injuries occurring.
c. You should never use this brush cutter when under the influence of alcohol,
when suffering from drowsiness as a result of having taken cold medicine, or
at any other time when a possibility exists that your judgment might be impaired
or that you might not be able to operate the brush cutter properly and in a safe
manner.
d. Avoid running the engine indoors. The exhaust gases contain harmful carbon monoxide.
e. Never use your brush cutter under circumstances like those described below:
1. When the ground is slippery or when other conditions exist which might make
it not possible to maintain a steady posture while using the brush cutter.
2. At night, at times of heavy fog or at any other times when your field of vision
might be limited and it would be difficult to gain a clear view of area.
3. During rain storms, during lightning storms. At times of strong or gale –force winds, or at any other times
when weather conditions might make it unsafe to use this product.
f. When using this product for the first time. Before beginning actual work. Then handling the brush cutter from
skilled worker.
g. Lack of sleep, tiredness or physical exhaustion results in lower attention spans, and this in turn leads to
accidents and injury. Limit the amount of time over which the brush cutter is to be used continuously to
somewhere around 30-40 minutes per session, and take 10-20 minutes of rest between work sessions. Also try
to keep the total amount of work performed in a single day under 2 hours or less.
h. Be sure to keep this manual handy so that you may refer to it later whenever any questions arise.
i. Always be sure to include this manual when selling, lending or otherwise transferring the ownership of this
product.
j. Never allow children or anyone unable to fully understand the directions given in this manual to use this brush
cutter.
■WORKING GEAR AND CLOTHING
a. When using your brush cutter, you should wear proper
clothing and protective equipment as follows.
(1) Helmet
(2) Protection goggles or face protector
(3) Thick work gloves
(4) Non-slip-sole work boots
(5) Ear protectors (esp. for long-time operation)
b. And you should carry with you things as follows.
1. Attached tools and files
2. Properly reserved fuel
3. Spare blade
4. Things to notify your working area (Rope, warning signs)
■BEFORE UES THE MACHINE
a. Read this owner’s manual carefully to understand how to operate this unit properly.
b. This product has been designed for use in cutting weed, brush, small tress and
similar vegetation. It should never be used for any other purpose since doing
so could result in unforeseen accidents and injuries occurring.
c. You should never use this brush cutter when under the influence of alcohol,
when suffering from drowsiness as a result of having taken cold medicine, or
at any other time when a possibility exists that your judgment might be impaired
or that you might not be able to operate the brush cutter properly and in a safe
manner.
d. Avoid running the engine indoors. The exhaust gases contain harmful carbon monoxide.
e. Never use your brush cutter under circumstances like those described below:
1. When the ground is slippery or when other conditions exist which might make
it not possible to maintain a steady posture while using the brush cutter.
2. At night, at times of heavy fog or at any other times when your field of vision
might be limited and it would be difficult to gain a clear view of area.
3. During rain storms, during lightning storms. At times of strong or gale –force winds, or at any other times
when weather conditions might make it unsafe to use this product.
f. When using this product for the first time. Before beginning actual work. Then handling the brush cutter from
skilled worker.
g. Lack of sleep, tiredness or physical exhaustion results in lower attention spans, and this in turn leads to
accidents and injury. Limit the amount of time over which the brush cutter is to be used continuously to
somewhere around 30-40 minutes per session, and take 10-20 minutes of rest between work sessions. Also try
to keep the total amount of work performed in a single day under 2 hours or less.
h. Be sure to keep this manual handy so that you may refer to it later whenever any questions arise.
i. Always be sure to include this manual when selling, lending or otherwise transferring the ownership of this
product.
j. Never allow children or anyone unable to fully understand the directions given in this manual to use this brush
cutter.
■WORKING GEAR AND CLOTHING
a. When using your brush cutter, you should wear proper
clothing and protective equipment as follows.
(1) Helmet
(2) Protection goggles or face protector
(3) Thick work gloves
(4) Non-slip-sole work boots
(5) Ear protectors (esp. for long-time operation)
b. And you should carry with you things as follows.
1. Attached tools and files
2. Properly reserved fuel
3. Spare blade
4. Things to notify your working area (Rope, warning signs)
■BEFORE UES THE MACHINE
a. Read this owner’s manual carefully to understand how to operate this unit properly.
b. This product has been designed for use in cutting weed, brush, small tress and
similar vegetation. It should never be used for any other purpose since doing
so could result in unforeseen accidents and injuries occurring.
c. You should never use this brush cutter when under the influence of alcohol,
when suffering from drowsiness as a result of having taken cold medicine, or
at any other time when a possibility exists that your judgment might be impaired
or that you might not be able to operate the brush cutter properly and in a safe
manner.
d. Avoid running the engine indoors. The exhaust gases contain harmful carbon monoxide.
e. Never use your brush cutter under circumstances like those described below:
1. When the ground is slippery or when other conditions exist which might make
it not possible to maintain a steady posture while using the brush cutter.
2. At night, at times of heavy fog or at any other times when your field of vision
might be limited and it would be difficult to gain a clear view of area.
3. During rain storms, during lightning storms. At times of strong or gale –force winds, or at any other times
when weather conditions might make it unsafe to use this product.
f. When using this product for the first time. Before beginning actual work. Then handling the brush cutter from
skilled worker.
g. Lack of sleep, tiredness or physical exhaustion results in lower attention spans, and this in turn leads to
accidents and injury. Limit the amount of time over which the brush cutter is to be used continuously to
somewhere around 30-40 minutes per session, and take 10-20 minutes of rest between work sessions. Also try
to keep the total amount of work performed in a single day under 2 hours or less.
h. Be sure to keep this manual handy so that you may refer to it later whenever any questions arise.
i. Always be sure to include this manual when selling, lending or otherwise transferring the ownership of this
product.
j. Never allow children or anyone unable to fully understand the directions given in this manual to use this brush
cutter.
■WORKING GEAR AND CLOTHING
a. When using your brush cutter, you should wear proper
clothing and protective equipment as follows.
(1) Helmet
(2) Protection goggles or face protector
(3) Thick work gloves
(4) Non-slip-sole work boots
(5) Ear protectors (esp. for long-time operation)
b. And you should carry with you things as follows.
1. Attached tools and files
2. Properly reserved fuel
3. Spare blade
4. Things to notify your working area (Rope, warning signs)
