GoVideo NOA Manuel utilisateur
Hi, I’m Noa.
Setup Guide
Table of Contents
05
06
08
12
16
18
Welcome
Acvang a New User
Working with Apple (iOS)
Working with Android
Renaming Your Cameras
Time Zone Change
4
5
Unscrew
Welcome to the GoVideo Family!
We would like to welcome you to the GoVideo Family.
By this me you have opened the box, now let’s get to know Noa.
In the box you should nd
the following items:
(If the camera is not slow ashing blue, press the reset buon for 3
seconds. See the diagram.)
Once unscrewed, ip camera up.
(You will need a pin to push reset buon)
Direcons for preparing your camera:
1. Remove all the pieces from their plasc bags.
2. Unscrew the camera from the base.
3. Open the baery bay inside the camera.
4. Insert the baeries. Polarity is shown on the lid.
5. Close baery lid and slide clip closed.
6. Screw base back onto the camera.
7. Wait 1 Minute. You should see a slow ashing
blue LED light.
1 camera 1 mounng
plate
1 bag of screws4 CR123A
baeries
Reset Buon
6
Acvang New User
Before you can begin:
Download and install the
GoVideo App to your phone/
tablet from the mobile app
store (GoVideo Cam on iOS
and GoVideo on Android).
You will also need your user-
name and password which
will be provided by your
GoVideo dealer.
Step 1 Step 2
Enter your email address and
the password provided by the
GoVideo dealer.
Select Login.
An acvaon code will be sent to
the email address you provided.
Open this email to view the 4
digit acvaon code. Enter this
code into the GoVideo app.
Select Connue.
7
Step 3 Step 5
Step 4
Choose a new password for the
GoVideo app. Enter the password
you selected twice.
Select Submit
At this point, you are logged into
the GoVideo app and can view a
list of cameras that are currently
linked to your account.
Choose a nickname for the
phone/tablet being used. This
selected nickname will be used
to idenfy and disnguish what
devices are currently logged in.
Select Connue
Examples: John’s Tablet, Jane’s Phone, etc.
8
Before you can begin:
GoVideo cameras can only be
connected to 2.4GHz WiFi
networks. Please ensure your
iPhone/iPad is connected to
the same 2.4GHz network
that you want to connect
your GoVideo camera to. Step 1 Step 2
Find the UID in the list of camer-
as that matches the UID on the
back of your camera.
Select the gear icon next to the
UID to enter Setup.
Once in setup select WiFi Setup.
Working with Apple (iOS)
9
Step 3 Step 5Step 4
If your WiFi is turned o in the
sengs of your iPhone/iPad you will
see this screen. Please turn on your
WiFi in the iOS sengs and select
Next. If your WiFi is already turned on
in your iPhone/iPad you will not see
this screen and can skip this step.
Enter the WiFi password for the
WiFi network you want to connect
to and then select Next.
Note: You can select the eye icon in the
password box to reveal the password to
ensure it has been entered correctly.
If your iPhone/iPad is not
connected to the WiFi network
you want to connect the camera
to, please do so now. Once
connected to the desired WiFi
network select Next.
10
Step 6 Step 7
In order for the WiFi sengs to
be pushed to the camera, you will
now need to switch the WiFi net-
work to the GoVideoAP network.
To do this, go to the iOS Sengs
page and select WiFi.
Locate the GoVideoAP WiFi
network and select it to connect
to it. Once connected to the
GoVideoAp WiFi network navigate
back to the GoVideo App.
Note: The GoVideoAP WiFi network will not
require a password to connect.
Working with Apple (iOS)
Autres manuels pour NOA
1
Table des matières
Autres manuels GoVideo Caméra de sécurité
