GoPass GPS-911M Manuel utilisateur

S-

-9

)

1. Precaution before Installation

zCheck if all the parts are included.

zPrepare a SIM card for GSM communication. Use some other mobile phone to

confirm that the PIN code has not been set, and that it can dial out and receive

telephone calls without problem.

zBefore install the SIM card, make sure to cut off power from the AVL unit. The

correct installation method is to push the tray completely into the AVL unit, until

you feel it is hooked by something.

zIt takes longer time (over 30 minutes) to get a position fix for the very first

time positioning. Please place the device without anything covered.

zThe factory default password is “8888”.

2. Panel Description

GPS-911(M) Hardware Quick Installation Guide

Speaker Answer/Hand up

Quick Dial 1

Quick Dial 2

Park Button

SOS Button

Power Button

Mini USB Connector

Microphone

COM Port

Charge LED

GPS LED

GPRS LED

Park LED

SOS LED

3. Installation

Step1. Fully charge the battery for at least 8 hours before your first use.

Step2. Install SIM Card:

(1) Remove the back cover of the device as illustrated.

(2) Push the holder top (with an ellipse hole) leftward to loose it.

(3) Pull the holder top up. Insert the SIM card by sliding it into the card holder

slot, with the chip module facing to the connectors on PCB, as shown in

the picture.

(4) Flip down the holder top. Push the holder top downward, and let it snap in

completely.

Step3. Put the battery cover back after insert the battery.

Step4. Turn on the unit, and check if the GPS can work properly or not.

※When GPS has got the position fix, the GPS LED will turn from steady orange light

to “blinking orange”. Check if the GPS LED has turned to “blinking orange light” in

about 1-3 minutes.

4. Operating Instructions

(1) Power On/Off

¾Power On:

¾Power Off:

When it is on, press the power button for 2 seconds to switch off the power; SOS/PARK

LED will flash for 3 times; then GPS LED will shut off few seconds later. By then, the

device is turned off.

Step1. When it is off, press the power button

for 2 seconds to switch on the power.

Step2. After power on, GPS LED will light on

first (steady orange light, or flashing

orange light after get a position fix).

Step3. Some 15 seconds later, GPRS LED

starts to flash swiftly for 10 times.

Step4. Then SOS/PARK LED lights on, and

shuts off some 15 seconds afterward.

By then, the device is ready to work.

(2) SOS Emergency Help Function

When SOS button is pressed, SOS LED will flash; GPS-911 will send a SMS message

for emergency help. The ones receive the message can activate the voice monitoring

function, and offer assistance in time. The phone numbers list can be set by the users.

(3) Conversation Function

Call In: One can make phone call to GPS-911 by simply dialing the SIM card number.

To receive the incoming phone call, one should press the “Pick-Up/ Hang-Up”

button to start the phone conversation.

Call Out: GPS-911 has two buttons for speed dial; you can preset 2 sets of phone

numbers of those you want to talk with. After the setting, you can make phone

call to the preset phone numbers by pressing down either of the two speed

dial buttons, “D1” or “D2”.

(4) Setting the Volume & Ring

Volume：Press “D1” for 3-5 seconds, the device will ring up. By then, you can press

D1(+) or D2(-) to adjust volume up/ volume down; and to confirm the

setting.

Ringing：Press “D2” for 3-5 seconds, the unit will ring up. By then, you can press D1(+)

or D2(-) to select the ring sound; and to confirm the setting.

(5) Geo-fence (Park) Function

Press the Park button, blue LED will start to flash; and Geo-fence (Park) function is

activated. The device will send a SMS message to the preset phone numbers, if your

car or your loved one moves beyond the preset distance range. Press the Park button

once again, the blue LED will shut off; and Geo-fence (Park) function will be cut off.

5. Battery Charging

¾Method 1: Connect the USB cable to the USB adaptor directly.

¾Method 2: Connect car charger to the car cigarette lighter directly.

¾Method 3: Connect the USB cable to the back-up battery.

6. Description of the LED Indicators

Charge

(RED LED) GPS STATUS

(ORANGE LED) GSM/GPRS

(GREEN LED) SOS

(RED) PARK

(BLUE)

Flash --- GPS is on, and

position is fixed GSM is sending/receiving

data or phone call SOS Monitor

Constant

Glow Battery charging GPS is on, but

position not yet fixed GSM is on, but not yet

connected to the network --- ---

Constant

Dark not charging;

or fully charged GPS is off, or

GPS has troubles

GSM is in the standby

mode; or SIM Card was

installed improperly;

or in trouble

OFF OFF

You can get the latitude & longitude data by sending “111#Password” SMS (short

message) command Code to the GPS Tracker. Input the received latitude &

longitude data to Google Earth (from earth.google.com) or Google Maps (maps.google.com),

then you can find the position fix in the map. Please find below the example.

Step1. Send a SMS Command Code“111#8888＂to the GPS Tracker.

Step2. GPS Tracker will send back the latitude & longitude data.

Step3. Input the latitude/longitude data (N52 21.6911', E004 48.5627) into the

column of “Search” and click on search button, Google Earth/Google Maps

will display the position map for you.

Track GPS Location by SMS

1. Requirements

(1) A PDA Phone with Windows CE or Mobile 5.0 OS.

(2) A navigation map installed in the PDA Phone.

(3) A GSM SIM card installed in the GPS Tracker.

2. Installation

Step1. Put the CD delivered with the tracker to the CD driver of your computer;

select “Windows Mobile 5.0/6.0” or “Pocket PC 2000-2003/WinCE”

according to the operation system of your PDA Phone to install “SMS

Track” software into your computer.

Step2. Please select “Device”, instead of “Storage Card” to install the program,

so that Windows can find the program and start the driver properly.

Step3. After PDA installation is completed, click “Start” Æ“Programs” Æ“SMS

Track” to set up the COM port.

SMS Track Software Quick Installation Guide

Step4. The following screen will prompt. The left column is for the name of the

COM Port; the center column is to

describe the status of the COM port;

the right column is to show the name of

COM Port Driver. We can find in the

description column, some of the COM

Ports are currently Empty, which

means these COM ports have not yet

been used by any other device, and

we can install the Virtual COM Port on

these ports marked with “Empty” in the

description column. For example, we

can find below COM8 is Empty, so we

can install Virtual COM Port on COM8

by click on it, then press “Install”.

Step5. If your set up of the Virtual COM Port is successful, the system will ask you

to reboot your PDAPhone. Please click “Yes” to reboot the device, and

complete the installation of Virtual COM Port.

3. Get GPS Position Data

Step1. Go to Tools Æ“Contact List”. Add name and Tel. After adding it, select

the name you want to track, and click OK to close this screen. Then go to

Track screen. (Note: you can also key in any tel. # in the TEL column, which you

like to track)

Step2. Then go to “Track” screen. Send the command “Get Position(GPRMC)”

to the tracker; you will receive the position data from the tracker in a few

seconds.

Get position (GPRMC)

Send back GPS data in GPRMC format.

These data will be sent automatically to

the mapping software.

Interval:

The time interval in seconds to send

back GPS position data.

Times:

How many times for the unit to send back

data => “-1” is for continuously sending;

“0” is for stop sending; “n” (a figure) is for

sending “n” times.

Autres manuels pour GPS-911M

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels GoPass GPS

GoPass

GoPass GPS-911 Manuel utilisateur

GoPass

GoPass GPT-800 Manuel

GoPass

GoPass GPS-911M Manuel utilisateur

GoPass

GoPass AVL-901C Instructions de montage

GoPass

GoPass AVL-900M Manuel utilisateur

GoPass

GoPass GPS-911 Mode d'emploi

GoPass

GoPass AVL-900 Manuel utilisateur

GoPass

GoPass AVL-901D Manuel

GoPass

GoPass AVL-900R Manuel

GoPass

GoPass GPT-800 Manuel utilisateur

GoPass

GoPass GPS-201 Manuel utilisateur

GoPass

GoPass AVL-900M Manuel

GoPass

GoPass GPS-911M Manuel utilisateur

GoPass

GoPass AVL-901 Manuel utilisateur

GoPass

GoPass GPS-911R Manuel utilisateur

GoPass

GoPass GPT-801 Manuel utilisateur

GoPass

GoPass GPT-810 Manuel utilisateur

GoPass

GoPass AVL-901C Manuel utilisateur

GoPass

GoPass GPT-801 Manuel utilisateur

GoPass

GoPass GDL-601 Manuel utilisateur

GoPass

GoPass AVL-901D Manuel utilisateur

GoPass

GoPass GPS-911R Manuel utilisateur

GoPass

GoPass AVL-900 Mode d'emploi

GoPass

GoPass GPT-810 Manuel utilisateur

Manuels GPS populaires d'autres marques

Raven

Raven Cruizer II Manuel

Hama

Hama 53118 Manuel utilisateur

Garmin

Garmin SOUNDER 125 Manuel utilisateur

Garmin

Garmin DEZL 580 Manuel utilisateur

Jigabot

Jigabot EX Manuel utilisateur

Pointer

Pointer Cellocator CelloTrack XT LTE Guide d'installation

Queclink

Queclink GV55LITE Manuel utilisateur

Voxson

Voxson Voxtrack GPS500 Manuel d'instructions

Garmin

Garmin ECHOMAP PLUS Manuel utilisateur

Starcom Systems

Starcom Systems Kylos Compact Manuel utilisateur

Garmin

Garmin 15 H Series Manuel utilisateur

Cobra

Cobra Marine MC 600Ci Manuel utilisateur

Cellocator

Cellocator CelloTrack T Manuel utilisateur

Enfora

Enfora Mini-MT GSM2228UG001 Manuel utilisateur

Magellan

Magellan eXplorist 100 Manuel utilisateur

LTE

LTE G50B Manuel utilisateur

Garmin

Garmin DEZL OTR500 Manuel utilisateur

SkyGolf

SkyGolf SkyCaddie SG1 Manuel utilisateur