Elevator agility setting (feed forward)
ELE light is solid-on → click SET → AGILE light flashes
Press and hold the SET button for 3 seconds to enter the adjustment mode, short
press the SET button until the indicator light ELE is solid-on and the AGILITY light
flashes. The factory default elevator agility is 5 and you will see the BLUE light
flashing 5 times followed by a pause.
You can use the Elevator stick of the transmitter to raise and lower the setting, forward
stick giving a higher setting (higher agility) and back stick to give a lower setting. The
number of consecutive flashes represents the setting level. The highest setting is 9
and the lowest setting is 1 flash (lower agility).
Agility or feed forward controls how much of the direct stick input is acted on by the
FBL when the Transmitter stick is moved. Higher levels will give a more reactive
control feel.
After completing setting changes, press and hold the SET button for 3 seconds to exit
and save, then the indicator light turns off and you are ready to fly. Or to move to the
next setting, click the SET button.
