Button, button, who's got the button? Oh, it's where we left it,
right in the middle on the top. Pretty obvious, really.
While the camera is off charged and disconne-
cted from any USB or HDMI connection (PC,
composite video, HDMI or charger) press and
hold the button down for approximately 2~3
seconds.The camera will beep three times.
The LED on the front of the camera will light
up for a moment,and will flash red while reco-
rding video. The targeting laser will come on
for a few seconds unless disabled, then auto-
matically go out.
While the camera is on, press the button and
hold for a quarter of a second and then release.
The targeting laser will come on for a few
seconds and then automatically switch off.
While the camera is recording, press and hold
the button for about three seconds.The camera
will beep twice, and the green LED will light up
for a moment.
When the SportsCam is turned OFF, insert the
cable associated with your desired outcome
(USB cable for a computer, USB-to-RCA cable
for Composite Video or the HDMI cable for
HDMI). Connect the other end of the cable to
the desired device (computer, monitor or TV,
as applicable).Press and hold the button for three
seconds to turn the camera on. The SportsCam
will automatically boot into the appropriate
mode for the cable connected.
Things that Pressing The Button will do
Turning the
Camera on
and
Recording
Video
Engage the
Targeting
Laser
Stop
Recording
and
Shutdown
Camera
Booting the
Camera into
HDMI,
USB or
Composite
Video
Modes
T he But t on: "Ope rat ing Guide ”
9
GO4 Vega N1 user guide
