GMP PROTOPIC AUTO-540 HS Manuel utilisateur

2015. 06

USER MANUAL FOR PROTOPIC AUTO-540 QUATRO SLIT

Before operating the unit, please read this manual thoroughly and retain it for future reference.

The design / specification of the machine could be changed for improvement without any prior notice.

INDEX

◐ SAFETY ◐ How to Laminate 37

page

Important Safety Instruction 3

page

Safety Device 6

page

◐ MAINTENANCE 43

page

Warning Stickers 7

page

◐ TROUBLESHOOTING 44

page

◐ INSTALLATION

Packing Contents 8

page

◐ SPECIFICATION 48

page

Main Devices 9

page

Move & Installation 10

page

◐ DIGITAL SLEEKING SOLUTION

Introduction of DIGITAL SLEEKING 49

page

◐ HOW TO USE CONTROL PANEL

GLOSS & MATT SLEEKING

page

Details for Display 13

page

HOLOGRAM SLEEKING 54

page

Control Panel 17

page

METALLIZE PRINTING 58

page

Messages 22

page

SLEEKING FILM SPECIFICATION 60

page

◐ HOW TO USE MAIN DEVICES

Feeding Devices 26

page

Lamination Devices 30

page

Cutting Devices

page

Other Devices 36

page

Important Safety Instruction

"Important Safety Instruction " is for the purpose of user's safety

and prevention of Property loss. Read thoroughly and Use rightly according to the manual

Warning : If you ignore this symbol, you could suffer serious injury or death

Caution: If you ignore this symbol, you could receive a serious injury or loss of property

This symbol means a prohibited action. If you ignore a prohibited action, you could suffer a personal injury and damage the machine

This symbol means a required action. If you don't follow this action, your safety is not guaranteed.

Required action will be included in this symbol.

Reference:The sign above refers the contents for user's safety and prevention of Property loss.

☞ POWER

Do not connect or disconnect with wet hands, as this will cause an electric shock

Do not overload a power supply,as this will cause a fire and an electric shock.

Do not use a damaged plug or lead, as this could cause a fire or an electric shock

Do not use other voltage and power supply other than specified, as this will cause a fire and an electric shock.

Warning

3/60

Important Safety Instruction

☞ POWER

Make sure plug is in the socket, as it could cause fire or an electric shock

For your safety, grounding the power

Do not pull the plug or bend improperly

Danger, Malfunction, loss of electricity could cause an electric shock

☞ Installation

Do not use materials near a naked flame

Do not use the machine in the sealed place.

Only use the specified power and voltage. It can be a reason of fireflame or an electricity fireflame.

Do not dissemble, make repairs or convert the machine. Contact your dealer for repairs

Ensure all hair, neckties, necklaces, are kept free of the feeding table to avoid injury

Do not convert the safety device and safety switch.

Do not spill any liquids on the laminator as this will cause damage and a possible electric shock

Do not use the flammable spray or flammable materials inside or outside the machine. As this could cause a fire.

Do not allow childern use of this equipment

Warning

Grounding

4/60

Important Safety Instruction

☞ POWER

When moving the product, turn off the power switch, disconnect the power plug from the socket

When lamintor is not in use, you must turn off the power switch, disconnect the power plug from the socket.

☞ Installation

anger - laminating blades are sharp and can cause injury.

More than 2 people are needed to carry this equipment to avoid personal injury or damage to the machine.

Keep gears and chains free of all materials

Do not touch the roller with your hand as you could be burnt.

Please avoid installing near the following places;

Gas stove, Ventilator or Air conditioner due the higher temperature or higher humidity

Do not place any materials on the laminator as they could catch a fire

Avoid the direct sunlight for the installing the machine

Avoid the dark and slope place for installation

Do not place any materials on the laminator as they could catch a fire

Do not touch the film and laminating machine just after lamination finishes as you could be burnt.

Use the machine with laminating purpose only.

Tidy up the place near the laminating machine.

Warning

5/60

Safety Device

☞ Emergency Switch

When emergency situation happened, it stops the running motor(rollers) rotation and system operation.

In case of emergency, use this switch.

☞ How to use

Press the Red button to operate the Emgency Stop Switch.

All system is stopped when this is pressed.

Turn the switch to the right to release from Emergency Status.

Emergency Switch

E-Stop S/W

6/60

WARNING STICKERS

For the user safety, in the outer design, the below sticker is attached. Be cautious not to injured during operation.

☞ Roller caution ☞ Higher Temperature

Do not touch the roller and heating plate with your hand as you could be burnt.

Do not touch on the heating part

Roller's higher temperature and press can damage your body

☞ Electricity Caution

☞ Cutting Caution

Inside the machine, high voltage flows,

Do not touch your body on the trimming device Do not open the outer case

You can suffer an injury You can suffer injury or sudden death with electricity shock

☞ Chain Caution

Do not your body wound into a chain.

You can suffer an injury

WARNING STICKERS

7/60

PACKING CONTENTS

Items Q'ty(EA)

LAMINATOR

FEEDING TABLE 1

PAPER GUIDE 2

AIR COMPRESSOR

AIR HOSE 1

GLASS TUBE FUSE (20mm) 250V/12.5A

GLASS TUBE FUSE (20mm) 250V/15A

WRENCH SET 1

LAMI TABLE

MANUAL 1

SEPARATOR IDLE ROLLER 1

LEADING PAPER

WASTE GUIDE 2

WASTE BASKET 1

CONTENTS

PROTOPIC AUTO-540 QUATRO SLIT

8/60

MAIN DEVICES

Main Devices

Decurling Adjustment Knob

Feeder

Roller Pressure

Gauge & Knob

Control Panel

Uppper Film Tension

Adjustmen Knob

Feeding Table

Lower Film Tension

Adjustment Knob

Side Slitter

Film Shaft Support

E-Stop S/W

Film Rewinder

Waste Guide

Waste Basket

Perforator

9/60

UNPACK & MOVE

☞ Unpacking

1. Product is packed with vacuum aluminum packing materials to avoid corrosion and external packing is wooden crate.

2. Wooden crate can be disassembled by 11mm box spanner.

Disassemble the 5 panels on the left picture and remove vacuum packing materials. Then, move it to the installation place.

☞ Move the product

◑ In the following cases, it requires to move it by forklift.

1. If the ground is not level.

2. If it is required to be moved it to more than 10m distance.

3. After unpacking and move it to an installation area.

◑ If it requires to move it by caster wheel.

1. If a distance to move the laminator is less than 10m distance in the same area

2. Move the laminator gently with more than 4 persons at least. During it is moved,

grap each corner of the machine.

◑ After the machine is moved

1. Lock the caster wheel and fix the machine with height adjustment legs.

2. Plug the power cord and connect the air hose.

3. Check the machine as the test operation.

WARNING : Machine weight is very heavy, then be careful to move it to avoid damage / injury.

Before it is moved, power cord / air hose have to be unplugged / disconnected.

☞ Caster Wheel

Leveling foot is to fix / to level the machine.

After the machine is moved on the installation place, fix the machine with spanner.

UNPACK & MOVE

Caster Wheel

10/60

Autres manuels pour PROTOPIC AUTO-540 HS

Table des matières

Autres manuels GMP Plastifieuse

GMP

GMP EXCELMASTER-1600 Manuel utilisateur

GMP

GMP RTR-380COMBI Manuel utilisateur

GMP

GMP ELECTRO ULTRA LAMITRIM-1800 Manuel utilisateur

GMP

GMP PROTOPIC-540 QUATRO SLIT Manuel utilisateur

GMP

GMP EXCELAM-1100SWING Manuel utilisateur

GMP

GMP GraphicMaster 1600HR Manuel utilisateur

GMP

GMP PROTOPIC III-540 Manuel utilisateur

GMP

GMP SURELAM-PRO540HR Manuel utilisateur

GMP

GMP SURELAM-PRO540HR Manuel utilisateur

GMP

GMP SURELAM-PRO540HR Manuel utilisateur

GMP

GMP QTOPIC-380 Manuel utilisateur

GMP

GMP PROTOPIC AUTO-540 HS Manuel utilisateur

Manuels Plastifieuse populaires d'autres marques

Renz

Renz HT 330 L Manuel utilisateur

Gfp

Gfp 44TH Manuel utilisateur

Lapis

Lapis Lamina006 Manuel utilisateur

Hama

Hama L44B Manuel utilisateur

PAVO

PAVO FLORIDA Manuel utilisateur

M-Triangel

M-Triangel MT-102 Manuel utilisateur

Akiles

Akiles PROLAM 230 Manuel utilisateur

D&K

D&K Masterpiece 550 Manuel utilisateur

Falcon

Falcon F-40 Manuel utilisateur

LEITZ

LEITZ EasyLaminator A4 Manuel utilisateur

LEITZ

LEITZ coldLAM CS9 Manuel utilisateur

kala

kala Starter 1080 Manuel utilisateur

Fellowes

Fellowes Venus A3 Manuel utilisateur

Qomolangma

Qomolangma FMJ-1400-WA-PLUS Manuel utilisateur

Opus

Opus Coverator 330 Manuel utilisateur

ALDI

ALDI OL 250-L Manuel utilisateur

Phoenix

Phoenix 2700-DH Manuel utilisateur

acropaq

acropaq AL-3400 Manuel utilisateur