GLP X4 Atom Manuel utilisateur

from software version: 8

support@glp.de

www.glp.de

Instruction Manual

Head

GLP German Light Products

X4 Atom Head manual (v1.0) from software version: 82

Contents

1Description of Device..................................................................................................... 3

2Safety Instructions ........................................................................................................... 4

3Mounting.......................................................................................................................... 6

3.1!Operating on the Floor (Upright)!..................................................................................!7!

3.2!Mounting in a single hanging or sideways position!.................................................!7!

3.3!Mounting in a multiple array or matrix setup!............................................................!8!

3.4!Securing the Fixture!..........................................................................................................!9!

4Connections .................................................................................................................. 10

4.1!Connect to the X4 ATOM PSU!.....................................................................................!10!

5Accessories.................................................................................................................... 11

5.1!Atom Trussbar!...................................................................................................................!11!

6Maintaining and Cleaning .......................................................................................... 12

6.1!Safety regulations!...........................................................................................................!12!

6.2!Maintenance and Interval (rule-of-thumb)!.............................................................!12!

7Technical Specifications: ............................................................................................. 13

8Dimensions..................................................................................................................... 14

GLP German Light Products

X4 Atom Head manual (v1.0) from software version: 83

1Description of Device

1. X4 Atom head (actively and passively cooled)

2. detachable and adjustable yoke / floor-stand

Rear view:

3. Power & Signal input

(XLR 4pin connect to Atom PSU only!)

Vent plug

Fan

4 x Socket for ATOM Connector

and/or yoke

GLP German Light Products

X4 Atom Head manual (v1.0) from software version: 84

2Safety Instructions

1. Before powering on the fixture, make sure that the fixtures fans and air

inlets are clean and not blocked.

2. A safety distance of at least 0.5 m must be maintained between the

fixture and any easily inflammable material (e.g. decoration material).

3. Attention! Don’t touch the fixture during the operation. This can cause

injuries and/or damages.

4. The fixture doesn’t contain any user serviceable parts. Opening the

fixture will void all warranties.

5. It is necessary to wait at least 15 minutes after disconnecting the mains

power before handling the fixture. Pay attention to possible hot parts

of the fixture.

6. To ensure safe operation, follow also the Installation guide described

in the chapter below. Operating the X4 ATOM without suitable safety

aids like Safety cables or clamps/hooks can increase the risk of an

accident and must be avoided.

7. Repair, maintenance, and installation work shall be done by qualified

or GLP certified staff only. You need to pay attention to the common

rules of technology that are not explicitly mentioned in this manual.

8. Use only original GLP spare parts. Any structural modification of the

system will terminate all warranty claims.

9. Please keep this instruction manual for future reference.

The X4 ATOM is a High-Tech Product.

To guarantee a smooth operation, it is necessary to respect

the following rules. The manufacturer of this device will not

take responsibility for damages through any disregard of the

information provided in this manual. Warranty claims also

will be voided in the case that the fixture housing is opened.

Never look directly into the beam of light or into the LED.

Attention: LED Class 2M can cause injuries of your eyes even

without optical instruments in front of them or within a

distance of less than 0.5m and short exposure time.

Hence: Avoid direct radiation into your eyes!

! ! !

WARNING:

Never let optical parts come in contact with alcohol,

solvents or similar cleaners.

GLP German Light Products

X4 Atom Head manual (v1.0) from software version: 85

Important Safety Information

The X4 ATOM fixture from GLP is fitted with a plano-convex lens. This type

of lens can act as a strong magnifying glass.

If the rays from a strong light source (such as the sun or another lighting

fixture) are directed towards the front of any of these fixtures, then internal

damage may occur. In a worst case scenario with a high power light

source this can happen very quickly, damaging the fixture internally,

potentially melting components or causing an internal fire within seconds.

In order to avoid these possible problems please adhere to the following

requirements:

•Do not expose the front of a fixture to direct sunlight or any other

strong light sources.

•For outdoor applications during daylight make sure that the front

face of any fixture is either shielded or points away from the sun,

even when fixtures are not in use.

•Do not modify the front glass or lens of any fixture.

These requirements have to be followed regardless of whether a fixture is

powered on or off as the magnifying effect is an optical effect and

therefore independent from the (electrical) state of the fixture.

Especially when working with high powered beam-lights; extreme caution

and observance of these safety instructions is mandatory.

Should you have any questions about the operation of your fixture then

please contact your local GLP office, or their authorized distributor, a list

of which can be found at www.glp.de.

GLP German Light Products

X4 Atom Head manual (v1.0) from software version: 86

3 Mounting

The X4 ATOM is fully operational whether it hangs or is mounted to the wall.

It can also be operated while standing on the floor. Keep a safety distance

of min. 0.5 m towards any easily inflammable materials (decoration etc.).

Pay attention to the regulations of: BGV C1 (former VBG 70)

and DIN VDE 0711-217.

The installation shall be done by qualified staff only.

For the various mounting positions of the X4 ATOM (standing on the floor,

sideways or hanging) different accessories kits are available. Through this

a safe and firm installation is assured. You'll find dedicated connectors on

each side of the fixture which should be used.

GLP German Light Products

X4 Atom Head manual (v1.0) from software version: 87

3.1 Operating on the Floor (Upright)

The X4 ATOM can easily be fitted with the included floor-stand which allows

a stable standing of the fixture.

It is fixed to the Atom head by simply sliding it into two opposite connector

sockets on any side of the fixture. Make sure so secure them both with the

latch.

To release it again press the buttons to open the latch and slide the

connectors out of the sockets.

An additional securing is usually not required. Please pay attention to an

even and gripping surface.

3.2 Mounting in a single hanging or sideways position

Buttons to release the latch

To operate one

X4 ATOM

in a hanging

position please use the dedicated yoke

supplied with your fixture. And attach it to

the fixture as described above.

Use a half-coupler (clamp or hook) to hang

the fixture from a dedicated truss

GLP German Light Products

X4 Atom Head manual (v1.0) from software version: 88

3.3 Mounting in a multiple array or matrix setup

Multiple X4 ATOM can be fixed together using the included ATOM

connector.

The ATOM connector is fixed to the Atom head by simply sliding it into one

of the four connector sockets on each side of the fixture.

Make always sure so secure it with the latch.

By connecting another X4 ATOM to the other side of the ATOM Connector

you can build pairs/quads/lines/matrixes, etc.

To release it again press the button to open the latch and slide the

connector out of the socket.

Note:

You can vertically hang a total of up to 12pcs. X4 ATOM underneath.

For more rigging Accessories please see the section 5 (Accessories) below.

ATOM Connector (GLP #767004)

GLP German Light Products

X4 Atom Head manual (v1.0) from software version: 89

3.4 Securing the Fixture

Regardless of the mounting method of the X4 ATOM you'll have to use a

stipulated safety wire. Attach the safety wire through the attachment point

at the back of each fixture.

The safety attachment point can be deployed by simply swinging it out from

the back as shown below.

Pay attention to a safe and proper fastening. The safety cable must comply

with BGI 810-3 (EN 60598-2-17 Section 17.6.6) and be capable of bearing a

static suspended load that is ten times the weight of the fixture and all

installed accessories.

safety attachment point

GLP German Light Products

X4 Atom Head manual (v1.0) from software version: 810

To ensure the IP65 rating of the Atom head you must use

an IP65 rated XLR female connector:

i.e. NEUTRIK® X-HD Series

4Connections

4.1 Connect to the X4 ATOM PSU

4-pin XLR connector / Connected load 20 VA (W) per head.

Pin 1 = [Ground] / Pin 2 = [Data +] / Pin 3 = [Data -] / Pin 4 = [V+ 24V]

Do not exceed 60m / 200ft. cable length for the input.

Do connect the X4 ATOM to an X4 ATOM PSU only.

The following models are compatible with the X4 ATOM:

•GLP# 767001 X4 ATOM PSU 12

•GLP# 767002 X4 ATOM PSU 6

Note:

For further details and instructions on the connection and use of the X4

ATOM PSU please refer to the related manual of either fixture.

Attention:

Connect the X4 ATOM only to an X4 ATOM PSU.

Never connect the fixture any other device as this may damage the fixture.

Table des matières

Autres manuels GLP Projecteur

GLP

GLP YpocBasic 250 Manuel utilisateur

GLP

GLP Fusion MBL40 Manuel utilisateur

GLP

GLP impression X1 Manuel utilisateur

GLP

GLP Impression X4 XL Manuel utilisateur

GLP

GLP Impression X4 XL Manuel utilisateur

GLP

GLP Impression 120RZ RGB Manuel utilisateur

GLP

GLP Fusion MBL20 Manuel utilisateur

GLP

GLP Impression 300 XL RZ RGB Manuel utilisateur

Manuels Projecteur populaires d'autres marques

VIZULO

VIZULO Micro Martin Guide de l'utilisateur

EuroLite

EuroLite LED IP FL-100 SMD Manuel utilisateur

Cooper Wheelock

Cooper Wheelock XB12 Manuel utilisateur

Allen + Roth

Allen + Roth 17624-000 Manuel utilisateur

ADJ

ADJ 4 STAGE PAK Manuel utilisateur

Cooper Lighting

Cooper Lighting EGL91SW233 Manuel utilisateur

Max

Max 37496 Manuel utilisateur

BEGA

BEGA 85 143 Manuel utilisateur

Beamz

Beamz 151.226 Manuel utilisateur

EuroLite

EuroLite LED IP FL-8 Manuel utilisateur

Ledj

Ledj PERFORMER 36 RGB Manuel utilisateur

Perel

Perel ELS3 Manuel utilisateur

Perel

Perel ELS3WD Manuel utilisateur

LumX

LumX LM 36130 Manuel utilisateur

Xtricity

Xtricity 4-80053 Manuel utilisateur

Stahl

Stahl 6521/4 Series Manuel utilisateur

Ecosense

Ecosense EcoSpec Manuel utilisateur

Ayrton

Ayrton minipanel FX Manuel utilisateur