Glorystar JAR151 Manuel utilisateur
Android Advertising
Displayer
JAR151
User Manual
Please read this instruction before
Importation Safety Instructions
Read this user manual
All safety and operating instructions in this user manual should be read before operating the
product
Keep this user manual
This user manual should be retained for future references.
Head Warnings
Be cautious about warning signals on the product.
Follow Instructions
Please follow instructions in this user manual
Attachments
To avoid danger, please do not use attachments not recommended by the product
manufacturer.
Mounting
Do not place the product on any unstable cart, stand, tripod or table to avoid injury on
children and adult. Please only use attachments indicated by product manufacturer.
Temperature
Please use this product within operating temperature 32°F ~ 100°F (0°C ~ 45°C), relative
humidity 20%-80%. The product should be situated away from any heat source such as
radiators, heat registers, stoves or other products (including amplifier) to product heat.
Avoid Liquid Invasion
Avoid the invasion of any liquid. Avoid placing it near bathtub, sink, kitchen, wet basement or
swimming pool. Do not place product on any uneven surfaces and keep a distance of at least 6
inches from wall. Do not place heavy objects on top of the unit and at sealed areas to avoid
heat ventilation problems.
Product Protection
Please do not place any attachment or parts inside the product to avoid contacts with voltage
points that could result an electric shock or fire.
Heat Ventilation
There is no heat ventilation on the upper and lower part of the product, therefore to avoid
overheating, please do not block any ventilation openings with objects (e.g. carpet). Please
allow the opening to have 10cm distance for ventilation.
Grounding or Polarization
This product could be equipped with an alternate plug.
Power –Cord Protection
Power supply cords should be routed so that they are unlikely to be walked on or pitched by
items placed upon them. Pay attention to the connection of plugs.
Power Sources
This product should be operated only from the type pf power source indicated on the rear
panel. If you are unsure of the type of power supply to your home, consult your product
purchaser or local power company.
Lighting and storms
Unplug the outlet during lighting, storms or long unused periods. This will prevent damages
and power-line surges to the product.
Overloading
Do not overload wall outlets, extension cords or integral convenience receptacles as this can
result in a risk of fire or electric shock.
Damage Handling
Unplug this product from the outlet of wall and request qualified service personnel under the
following conditions:
• when the power supply cord or plug is damaged
• when the picture display gets dimmer
• when liquid has been spilled or objects have fallen on to the product
• when the product has been exposed to rain or water.
• Adjust only those controls that are in the instruction manual. For improper adjustments may
result in damage and will often require extensive work by a qualified technician to restore
the product to its normal operation.
• When the product exhibits a distinct change in performance-this indicates a need for repair
service.
Replacement parts
When replacement parts are required, be sure that the technician uses replacement parts
specified by the manufacturer or parts with same features. Unauthorized substitution may
result in fire, electric shock or other hazards.
Safety Check
Upon completion of any service or repair to this product, ensure technician for proper
operating condition performs safety checks.
Warnings
If the battery of remote control is incorrectly replaced, there will be a danger of explosion.
Storage
Keep the product at dim areas, room temperature and low humidity to maintain original
condition. This will avoid danger.
Transportation
Since the product consists of glass and delicate electronic components, excessive shock or
drop will result damages. Please handle the product carefully to minimize shock during
transportation.
Recycling
The product utilizes tin-lead solder, and has a fluorescent lamp containing a small amount of
mercury. For environmental considerations, disposal of these materials may be regulated in
your community. For disposal or recycling information, please contact your local authorities,
or Electronics Industries Alliance: http://www.eiae.org/
Cleaning
Unplug the product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol
cleaners. Use damp cloth for cleaning.
Spec. & Package
Package included:
-Please confirm all the items is included before the setup start.
Model JAR151
Sizes 15”
Resolution
(pixles)
1024x768
Brightness 250 cd/m2
Aspect Ratio 4:3
CPU ARM Cortex A7 at 1.3 Ghz Processor with ARM Mali-400MP2
GPUProcessor
RAM 1 GB DDR3
Operating
System
Android 5.1
Hardware Earphone, RJ45, Wi-Fi (802.11b/g/n), USB, micro-USB
Support
Speaker 2Wx2
Memory
Support
SD Card
Introduction of Android
1. Start up and shut down
To start your device, switch on the “Power button” to light up the screen. To shut
down your device, switch off the “Power Button” until the following dialog popup
appears.
2. The App Drawer – right top corner
Press the icon in the bottom middle of the screen to open the App Drawer. The
“Apps” tab displays all applications that are available on the tablet.
To place a app shortcut on the desktop, touch and hold the icon until the App Drawer
fades and the desktop appears. Move your finger to the location where you want to place
the icon and release your touch to place the icon.
When using apps or other parts of the operating system you often will see the “Extra
Options” icon.
Pressing this icon will open a secondary menu with more options. Functions like opening
an advanced setting menu, switching to a different account or refreshing the displayed
information are often “Hidden” behind this icon.
3. Navigation icons – bottom of the screen
On the bottom side you will find icons: Use the navigation icons “Home”
Or “Return” to close the App Drawer and return to your desktop. The “Recent
Activity” icon will show an interview of the active and recently opened applications.
Click on the small displayed preview to open that application.
General Operation
1. Installation of Applications
You can install your own Apps by opening the Apps shop. This button can be found in the
screen. Note that not all applications may function properly for your tablet. Some are made
especially for small screen devices such as phones.
You can also install your own Apps by opening the File Manager with SD card. You can find
the File Manager in the “App drawer＂too. And please follow the below steps:
1)Copy the APK file to your SD memory card and insert the card into your Jarvis.
2)Open the File Manager and click the SD card icon.
3)Open the APK and click on the install button.
4)It will show the installing blocked because it is not from Apps store｀Google Play’and then
please accept the permission.
5)The application is now installed.
2. Administer/remove apps
The｀Apps＇
item in the｀Setting＇
menu will display an overview of the installed apps. There
are four tabs available which filter the displayed app list. Select an app to view its detailed
information.
In the detailed information you also have the options｀Force Stop＇,｀Uninstall＇,｀Clear
data＇and｀Move to SD card＇. Moving apps to your SD card can save you some internal
storage memory on the tablet.
The｀Clear cache＇
and｀Clear defaults＇
can be used when you are experiencing issues with a
specific app. Clearing cached information and (possible wrong) default settings may solve the
problem. Clearing this information will also wipe any stored login information. i.e. clearing
the cache of your social media app will also force you to re-login afterwards. Apps may also
be removed in the apps content page of the market/ shop application.
Table des matières
Autres manuels Glorystar Moniteur
