Globe GloPhone tglo Manuel utilisateur
GloPhone
User Guide
GloPhone Version 3.0
Document Version 2.2.0
December 20, 2005
Copyright2004TheGlobe.com,110EastBrowardBlvd,14thFloor,FortLauderdale,FL33301.All
rightsreserved.VoicegloisaregisteredtrademarkofTheGlobe.com.GloPhoneisatrademark
belongingtoTheGlobe.com.LinuxisaregisteredtrademarkofLinusTorvalds.Macintoshisa
registeredtrademarkofAppleComputer,Inc.BluetoothisatrademarkownedbyBluetoothSIG,Inc.
MicrosoftandOutlookareregisteredtrademarksofMicrosoftCorporationintheUnitedStatesand
othercountries.NetscapeisaregisteredtrademarkofAOLTimeWarner,Inc.
1
•
•
•
•
•
•
tglo Online User Guide
Chapter 1
• • • • • •
About GloPhone
GloPhone is a browser-based telephone that uses Voice over IP
(VoIP) technology. Using GloPhone, you can make calls to and
receive calls from any phone in the world using your Internet
browser, while surfing the web at the same time.
Figure 1. GloPhone
GloPhone includes many telephone features you are used to and
some that are unique to GloPhone. When you download GloPhone
the following phone features are included free of charge:
•
Caller ID
•
Conference Calling
•
Call Waiting
•
Voice Mail to E-mail
•
Call Forwarding
•
Hold
•
Missed Call Notification
2
Chapter 1 - About GloPhone
•
•
•
•
•
•
tglo Online User Guide
System Requirements
The following is required to use GloPhone:
•
Computer running Windows
®
2000, Windows
®
Millennium (Me),
or Windows
®
XP.
•
Your PC’s microphone an speakers.
•
Microsoft
®
Internet Explorer or Mozilla Firefox
®
•
A dial-up or broadband Internet connection
1
©2003-2004 Voiceglo.com
Chapter 2
Getting Started
Checking Your Audio Equipment
Before you begin using GloPhone, be certain that your audio equipment is connected properly.
Microphone and Speakers
If you are using your PC’s microphone and speakers with GloPhone, follow these steps.
1Click the Windows Start button.
2Click Programs > Accessories> Entertainment > Sound Recorder.
Figure 5. Sound Recorder Pop-Up Window
3Click the record button ( ) and speak into your PC’s microphone.
4Click the stop button ( ) when you are finished.
5Click the play ( ) button.
If you hear your recording played back, your microphone is connected to your PC properly.
If you do not hear your recording:
•
Check to see if the microphone is connected to the PC
•
Check to see if your PC’s volume setting is too low or set to mute.
2
©2003-2004 Voiceglo.com
USB Phones and Bluetooth Headsets
If you are using a USB Phone or a USB Bluetooth Enabled Headset, follow the manufacturer’s
instructions for installing and troubleshooting these products.
Downloading Additional GloPhone Numbers
You can have up to 6 GloPhone accounts per PC. When you start GloPhone, if you have more than
one GloPhone account, a pop-up window opens and you can select the account phone number
you want to use.
1
• • • •••
Chapter 3
Using GloPhone
Starting GloPhone
Start CentComm by double-clicking the icon ( ) on your desktop.
Launch GloPhone from your CentComm interface by clicking Place a Call.
Figure 7. GloPhone User Interface
If the icon does not appear on the menu bar immediately after
you activated the software, reboot your PC and open the
browser again.
Your GloPhone Number
Status Indicator
Contol Buttons
Status Display Window
Alpha-Numeric Keypad
2
Chapter 3 - Using GloPhone
• • • •••
The components of the GloPhone are described below.
•Your GloPhone
Number
Your number appears at the top of
the GloPhone.
•Status Display
Window
Provides information related to
GloPhone calls. It contains the
Status Indicator and the controls
for viewing Missed, Received, and
Dialed calls. When you dial a
phone number it appears in the
status display window. When you
receive an incoming call, the
caller’s phone number appears in
the status display window.
•Status Indicator
Indicates the state of the
GloPhone. Most of the time it
indicates that GloPhone is “Ready
for Call.”
•Control Buttons
These buttons are similar to
mobile phone controls. Each are
described throughout this guide.
•Alpha-Numeric
Keypad
Touchtone keypad. This is similar
to the keypads of mobile and
landline phones you are used to.
Use your mouse to click the
numbers you want to dial.
Using GloPhone
Chapter 3 - Using GloPhone
3
GloPhone User Guide
• • • •••
Moving GloPhone
Click the top or side of GloPhone and drag it to any part of your window that suits
your needs.
Making Phone Calls
There are multiple ways to make calls with GloPhone. It does not matter which
method you use, and you can use a combination of each to make calls. Each method
is described below.
Using the Alpha-Numeric Keypad
You can use the alpha-numeric keypad on the GloPhone to
dial phone numbers.
1
Click the numbers on the alpha-numeric keypad on GloPhone to dial a phone
number.
The numbers you dial appear in the status display window.
You must dial a “1” before dialing any GloPhone, mobile,
and landlinebased numbers in the US and Canada.
If you make a mistake while dialing, press
BACKSPACE
to
delete the numbers one at a time, or press
ESC
to clear all the
numbers and start over.
4
Chapter 3 - Using GloPhone
• • • •••
2
Click
Talk
.
3
When you are finished talking, click
End
to end the call.
Using Keyboard Keys
You can also use your keyboard keys to dial phone numbers.
1
Press the appropriate numeric keys to dial a number.
The numbers you dial appear in the status display window.
2
Press
ENTER
to place the call.
3
When you are finished talking, press
ESC
on your keyboard to end the call.
Using Your Browser’s Address Bar
You can make calls directly from your browser’s address bar.
1
Type the contact’s phone number in your browser’s address bar.
2
Press
ENTER
.
If you make a mistake while dialing, press
BACKSPACE
to
delete the numbers one at a time, or press
ESC
to clear all the
numbers and start over.
Ce manuel convient aux modèles suivants
1
Table des matières
