Global Streams CS-1000 Manuel utilisateur
CS-1000
User’s Guide
YYY)NQDCN5VTGCOUEQO
Copyrights. Copyright 1998-2003, GlobalStreams, Inc. All rights reserved. The GlobeCaster System
software, content and documentation are copyright 1998-2003. This User Manual may not, in whole or
in any part, be copied, photocopied, reproduced, translated, or reduced to any electronic medium or
machine readable format without the prior written consent of an authorized representative from
GlobalStreams, Inc.
Trademarks. GlobalStreams, GlobalStreams and the GlobalStreams logos, GlobeCaster and the
GlobeCaster logos are trademarks of GlobalStreams, Inc. Windows and Windows NT are registered
trademarks of Microsoft Corporation.
Patents. Various technology in the GlobeCaster System is patented in the United States, including
without limitation patent numbers 5,941,997, 5,978,876, 5,872,565. Other patents, in the United States
and othercountries, are pending.
i
control surface
user’s guide
table of contents
Ch1: introduction
....................................................................1
features
......................................................................2
technical specifications
.......................................................2
contact information
...........................................................2
Ch2: connectivity
...................................................................3
Ch3: functions
.......................................................................7
video buses
..................................................................7
freeze/strobe controls
........................................................9
comm/power status lights
....................................................9
number pad
................................................................10
fade to black
...............................................................11
effect controls
..............................................................11
t bar
.......................................................................18
soft labels
..................................................................18
configuration panel
.........................................................19
Ch4: software changes
.........................................................27
FCC Notice
.........................................................................31
index
....................................................................................I
ii
table of contents
1
control surface
user’s guide
chapter 1
introduction
The CS-1000 is GlobalStream’s Control Surface that is designed to provide
the GlobeCaster user with increased functionality and ease of use in live pro-
duction applications. Your CS-1000 box contains the following items:
Figure 1.1: CS-1000 Package Contents
MCS-1000 Unit PPower Cable
NReference Guide QRubber Feet
ORS-422 Cable* RReplacement Bulbs
O
N
P
M
Q
R
*The supplied RS-422 cable was specially manufactured for use with the CS-1000. In the event that this
cable is damaged, contact GlobalStreams for replacement information.
2chapter 1
introduction
features
•Program/Preview Keyrows—Keyrows that provide dedicated but-
tons which may be used to route a variety of sources onto the Pro-
gram and Preview busses.
•Freeze/Strobe Control—Physical area that enables you to control
the freeze and strobe rates for the Program and Preview buses.
•Effect Control Section—Dedicated area that allows you to control
the mix of the video busses.
•T-Bar—Provides smooth manual control over wipes, fades, and
effects (as determined by selected mode).
•Fade to Black—A dedicated control to activate/deactivate the Pro-
gram Out Fade-to-Black function. An illuminated button provides
visual feedback when this feature is being used.
•Control Keypad—Used to trigger numerical shortcuts.
technical specifications
contact information
If you need further assistance with CS-1000, there are several ways to con-
tact GlobalStreams’support staff.
Product Dimensions 31”(w) x 13”(d) x 2.5”(h)*
*Height is measured without T-Bar.
Product Weight 14 lbs.
Phone 866.558.7830
E-mail support@globalstreams.com
Website http://www.globalstreams.com/support
3
control surface
user’s guide
chapter 2
connectivity
Installing the CS-1000 to your GlobeCaster is a quick and easy process. You
will need to have the following items ready before you can install your CS-
1000:
•Power Cord (supplied)
•RS-422 Serial Cable (supplied)
•Rubber Feet (supplied)
•GlobeCaster Software 2.8.2 (prefer 2.9 for full functionality)
4chapter 2
connectivity
NOTE:
/CMGUWTG[QWTJQUV2%CPF)NQDG%CUVGTWPKVCTGDQVJVWTPGFQHHDGHQTG[QW
EQPPGEV[QWT%5
Figure 2.1: Connecting Your CS-1000
Figure 2.1 illustrates how to connect your CS-1000 to your host PC. The CS-
1000 plugs directly into the VideoNet card on your host PC via the supplied
RS-422 serial cable. To connect your CS-1000 to your GlobeCaster, follow
these steps:
1. Install the rubber feet in the four corners on the bottom of your CS-1000.
2. Place your CS-1000 on a flat surface next to your GlobeCaster and host
PC.
5
control surface
user’s guide
3. Remove the RS-422 serial cable from the box and attach one end of the
cable into the port labeled RS-422 on the back of the CS-1000.
4. Locate your VideoNet card on your host PC. The VideoNet card has a
serial port on the back labeled Control Port or Controller. Connect the
other end of the RS-422 cable to this port.
5. Remove the power cable from the box and attach one end to the back of
the CS-1000 and the other end to an outlet.
6. Now it’s time to power all three devices. Be sure to power the devices in
the following order: CS-1000, GlobeCaster unit, and host PC.
6chapter 2
connectivity
Table des matières
