Global Sat SATweb EXPLORER Guide d'installation et d'utilisation
How to Update APN Settings
Queensland Australia | +61 7 3282 8504 | [email protected]om.au
GlobalSat Pty Ltd | ABN 12 067 562 314
Overview
If your SATweb device has changed regions, there is a chance that the APN setting may lapse
to default parameters. This is a rare occurrence however it can happen.
In the case where your SATweb terminal won’t connect to the internet, you will need to
check your APN settings and update them to the by following the simple steps below:
Step #1 1
●Ensure you are connected to your SATweb 510 or 323 device via WiFi or Ethernet.
●Access the Explorer Connect interface via the smartphone app or web interface.
●Select “Terminal Access”
GlobalSat Pty Ltd | ABN 12 067 562 314
Step #21
●On the Standard Data tab, select the Gear Icon to the right of the screen
●Then select the Parameters tab.
GlobalSat Pty Ltd | ABN 12 067 562 314
Step #31
Make the following changes:
●APN: change to “User defined”
●User defined name: satcom.bgan.inmarsat.com
●SAVE settings at the bottom of the screen.
Disclaimer
Any responsibility or liability for loss or damage in connection with the use of this product and the accompanying
documentation is disclaimed by GlobalSat Pty Ltd. The information in this manual is provided for information purposes only,
is subject to change without notice and may contain errors or inaccuracies. Manuals issued by GlobalSat Pty Ltd are
periodically revised and updated.GlobalSat Pty Ltd is not responsible for the content or accuracy of any translations or
reproductions, in whole or in part, of this manual from any other source. In the event of any discrepancies, the English
version shall be the governing text.
GlobalSat Pty Ltd | ABN 12 067 562 314
Ce manuel convient aux modèles suivants
2
Table des matières
Autres manuels Global Sat Système GPS marin
