GLOBAL LINK Ultra ES Pro Smart Lock Manuel utilisateur
August 2021 Page 1
Ultra ES Pro Smart Lock
User Instructions
The Global Link Ultra ES Pro Smart Lock features:
Bluetooth® wireless technology, allowing control of the lock with the free Global Link
Connect app and real time notifications of lock status on your smartphone or tablet
Convenient handle design, available in both right- and left-handed models
Illuminated keypad for keyless entry
Beep feedback indicating success and failure of actions as well as low battery conditions
Easy installation in standard door cutouts and direct replacement for standard travel
trailer entrance locks from:
FIC / Wesco
Bauer
TriMark
Support for two access PINs—a factory default PIN and a user PIN
Interior safety release button for emergency exit
Customer key access for alternative operation of the lock
Can be keyed-alike to match other Pro Series locks
The lock is powered by a single Type 123 lithium battery and operates with a 4-digit PIN. Each
lock has a factory default PIN that can be used at any time and cannot be erased; 1 additional
user PIN can be added.
Important: Before using the lock, record the default 4-digit PIN printed on the purple key tag
affixed to the inside handle of the lock. The factory default PIN is needed for keyless entry before
a user PIN has been added and to program / reprogram the user PIN.
Figure 1: Global Link Ultra ES Pro Smart Lock
WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov.
Global Link Ultra ES Pro Smart Lock
Instructions
August 2021 Page 2
Global Link Connect
The Global Link Ultra ES Pro Smart Lock is compatible with the Global Link Connect app. Global
Link Connect lets you lock and unlock the lock from your Bluetooth® wireless technology
enabled smartphone or tablet. It is recommended for use on mobile devices with iOS 14 or newer
or Android OS 6 or newer.
Global Link Connect also lets you receive real-time status notifications from the lock indicating:
Lock / unlock status
Battery life
PIN code changes
Lock name changes
Connection status
Global Link Connect allows control of up to 2 locks by up to 8 users. Users can easily add and
name locks, as well as manage user PIN codes for each connected lock. Communication
between the app and lock is supported at a range of up to 120 feet (36.5 meters) depending on
environment and is protected by the latest industry security standards.
Global Link Ultra ES Pro Smart Lock
Instructions
August 2021 Page 3
Pairing
To use Global Link Connect with your lock, you must download the app from the App Store or
Google Play to your smartphone or tablet and then pair the lock with the app.
To pair the lock and app
1. Make sure the Bluetooth setting is enabled and Airplane Mode is turned off on your
smartphone or tablet.
2. Tap Begin Pairing on the QuickStart screen or tap the + icon on the home screen.
A list of locks available for pairing automatically appears.
Note: Any locks already paired do not appear in the list.
3. To refresh the list, tap Scan Devices.
Note: To speed up detection of the lock, use a blunt object, such as a pen, to press the
PAIR button on the inside of the lock. The green PAIR LED flashes rapidly in response
for about 30 seconds.
4. Tap Add next to the lock to be paired.
5. Enter the 4-digit factory PIN (located on the lock’s purple key tag) or your 4-digit user
PIN.
6. Change the name of the lock if it is set to the default name. The lock name may include
up to 14 characters, including letters, numbers, spaces, dashes, and underscores.
7. Tap the PIN type (FACTORY PIN or USER PIN) being used for pairing.
8. Tap Connect.
A notification message appears on the app (Figure 2) and the green PAIR LED on the
inside of the lock flashes twice to indicate success.
Figure 2: Pairing with Global Link Connect
Global Link Ultra ES Pro Smart Lock
Instructions
August 2021 Page 4
Locking and Unlocking
The lock supports both keyless and keyed operation.
Important: It is recommended to lock the deadbolt during transportation for added security. Do
not use Global Link Connect to operate the lock during transportation.
Using Global Link Connect
From the home screen, tap the lock’s padlock icon to lock or unlock the door.
A green, unlocked padlock indicates the door is unlocked. A red, locked padlock indicates the
door is locked.
Notes: Two descending beeps indicate successful locking, and two ascending beeps indicate
successful unlocking. The keypad light flashes to indicate activity at the lock.
Figure 3: Using Global Link Connect to Lock and Unlock the Door
Global Link Ultra ES Pro Smart Lock
Instructions
August 2021 Page 5
Using the Keypad
To lock the door:
1. Press any key to wake up the keypad.
2. Press and hold the 1-2 key and the 3-4 key at the same time. Two descending beeps
indicate success.
To unlock the door:
1. Press any key to wake the keypad.
2. Enter the factory default PIN (printed on the purple key tag affixed to the inside handle of
the lock) or the current user PIN. Two ascending beeps indicate success.
Notes: If 4 quick beeps sound, the PIN was incorrect; enter the correct PIN. If an
incorrect PIN is entered twice, the keypad goes to sleep; wake the keypad to try again.
Using the Deadbolt Lever
Use the red deadbolt lever to lock and unlock the door from the inside (Figure 4).
Note: For exit in the event the deadbolt lever fails, slide and hold the safety release button and
open the door.
Figure 4: Using the Deadbolt Lever
Safety release button
Deadbolt lever (in locked position)
Global Link Ultra ES Pro Smart Lock
Instructions
August 2021 Page 6
Programming the User PIN
A 4-digit PIN is required for keyless locking and unlocking from the outside of the door or using
Global Link Connect. The lock supports 2 PINs—the factory default PIN and a user PIN.
The factory default 4-digit PIN is preprogrammed and cannot be erased. This PIN can be found
on the purple key tag affixed to the inside handle of the lock.
If using Global Link Connect to control and monitor your lock, always program the PIN from the
app. The app cannot operate the lock if the PIN programmed at the lock is different from the PIN
entered in the app.
To add or change the user PIN using Global Link Connect:
1. Tap Settings and then tap Devices.
2. Tap the lock whose PIN you want to change.
Note: You also can navigate directly to the Lock Settings screen by pressing and holding
the lock’s padlock icon on the home screen.
3. On the Lock Settings screen, tap the pencil icon next to the PIN field.
4. On the Change PIN screen (Figure 5), enter the new PIN twice.
5. Tap Save.
A notification message appears indicating the PIN was successfully set. The lock sounds
three varied beeps to indicate the new PIN was set.
Note: If the lock was set to the factory default PIN, the lock is updated to use the
customer PIN and the PIN Type is automatically changed to User.
Figure 5: Using Global Link Connect to Set the User PIN
Global Link Ultra ES Pro Smart Lock
Instructions
August 2021 Page 7
To add or change the user PIN at the lock:
1. Press and hold the 9-0 key for 3 seconds until the lock beeps twice.
2. Enter the factory default PIN or the current user PIN. Two beeps indicate a correct PIN.
Note: Each key represents two numbers. For example, to enter “2”, press the 1-2 key.
3. Enter the new PIN. The three varied beeps indicate a new PIN was entered.
4. Enter the new PIN again to confirm. (If you enter an incorrect digit, press and hold the 9-0
key and re-enter the PIN.) Three varied beeps indicate success.
Note: If 4 quick beeps sound, the PINs did not match; start again.
Important: The factory default PIN must be used to pair Global Link Connect with the
lock even if the user PIN was programmed using the lock’s keypad. After pairing, the user
PIN can be set using Global Link Connect.
Global Link Ultra ES Pro Smart Lock
Instructions
August 2021 Page 8
Checking Status Information for the Lock
Global Link Connect lets you check status information for the lock, including the current PIN and
battery status, at a glance.
To check status information:
1. Open the app or tap Home to go to the home screen.
The lock’s icon shows its current status.
A red, locked padlock means the door is locked.
A green, unlocked padlock means the door is unlocked.
A green battery icon means the battery status is normal.
A red battery icon means the battery status is low.
A grayed-out padlock and battery icon mean the lock is disconnected from the
app.
A spinning icon means the app is currently connecting to the lock.
Notes: To refresh the lock status information without reopening the app, swipe down on
the home screen. This is useful for checking the status of the red deadbolt lever.
2. Press and hold the lock’s padlock icon to navigate directly to the Lock Settings screen.
The Lock Settings screen (Figure 6) provides the following information for the lock:
Lock Name
PIN and PIN Type (Factory or User)
Lock Status (Locked or Unlocked)
Battery Status (Normal or Low)
Voltage Status (current battery voltage in volts)
Figure 6: Checking Lock Status Information
Global Link Ultra ES Pro Smart Lock
Instructions
August 2021 Page 9
Changing the Lock’s Name
You can change the default name of a lock when pairing Global Link Connect with the lock. You
also can change the lock’s name later on the Lock Settings screen.
To change the lock’s name:
1. Tap Settings and then tap Devices.
2. Tap the lock whose name you want to change.
Note: You also can navigate directly to the Lock Settings screen by pressing and holding
the lock’s padlock icon on the home screen.
3. On the Lock Settings screen, tap the pencil icon next to the Name field.
4. On the Change Name screen (Figure 7), enter the new name. The lock name may
include up to 14 characters, including letters, numbers, spaces, dashes, and
underscores.
5. Tap Save.
A notification message appears indicating the name was successfully set.
Figure 7: Changing the Lock’s Name
Global Link Ultra ES Pro Smart Lock
Instructions
August 2021 Page 10
Using the Global Link Connect Battery Saver Feature
Global Link Connect provides a Battery Saver feature that lets you disable automatic
reconnection attempts when the app loses connection to the lock, such as when the lock is no
longer within communication range of the smartphone or tablet. If the Battery Saver feature is
enabled, you must manually reconnect to the lock to enable communications.
Note: The Battery Saver feature has no effect on the lock’s battery life but improves the
smartphone’s or tablet’s battery life.
To enable or disable the Battery Saver feature:
1. Tap Settings.
2. On the Settings screen, tap the Battery Saver slider button to enable or disable the
feature.
The background of the slider button is white when enabled and grayed out when
disabled.
Figure 8: Enabling and Disabling the Battery Saver Feature
Table des matières
Autres manuels GLOBAL LINK Verrouillage
