Global Industrial DJ365 Manuel utilisateur

- 0 -

Instruction Manual

Drum Pallerizer

Note: The Owner/Operator must read carefully and understand

all the information presented here before operation.

- 1 -

THANK YOU FOR USING THIS DRUM PALLERIZER. FOR YOUR

SAFET AND CORRECT OPERATION, PLEASE CAREFULLY READ

THIS INSTRUCTION BEFORE USING IT.

NOTE: All of the information reported herein is based on data available

at the moment of printing. The factory reserves the right to modify its

own products at any moment without notice and incurring in any

sanction. So it is suggested to always verify possible updates.

1. SPECIFICATION

Model DJ365

Capacity 365kg / 800lbs

Acceptable Drum Style 55 gallon, steel

Overall Size L×W×H 1250*1100*1250 mm

Net Weight 60kg

Wheel (poly) Dia*Width D150*50, D100*32mm

2. NOTICE

2.1 Do not operate this pallerizer more than 70m/min speed when

overloading.

2.2 Do not operate the pallerizer unless you are trained and authorized.

2.3 Please operate the pallerizer on the hard surface.

2.4 Please push the drum when operating the pallerizer.

3. OPERATION

3.1 Clamp the pawl handle for putting the handle on the top position.

3.2 Push the drum near the pallet, the big hook button up the drum while

two small hooks button up the side of drum, then pull the handle until

the lowest position.

3.3 When release the drum, press the handle down, then clamp the pawl

- 2 -

handle and lower the handle slowly to put the drum on the ground.

4. EXPLODED VIEW & PART LIST

※

- 3 -

No. Description Qty Remark

1. Split pin 2 Ф3.2*32

2. Hook assembly 1

3. Pipe core 1

4. Handle assembly 1

5. Left columniation 1

6. Hex bolt 2 M12*80

7. Flat washer 4 Ф12

8. Hex nut 2 M12

9. Pneumatic columniation 1

10. Hex bolt 4 M10*70

11. Flat washer 8 Ф10

12. Hex nut 4 M10

13. Wheel 2 Ф150

14. Wheel shield 2

15. Hex nut 2 M12

16. Right columniation 1

※ Pawl handle 2

17. Pedestal 1

18. Swivel wheel 2 Ф100

19. Hex bolt 8 M10*20

20. Flat washer 8 Ф10

21. Spring washer 8 Ф10

NOTE: “※” had been contained in No 4 ( the hand assembly )

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Global Industrial Système de levage

Global Industrial

Global Industrial 293223 Manuel utilisateur

Manuels Système de levage populaires d'autres marques

morse

morse 82H-124 Manuel utilisateur

Braun

Braun NL955 Series Manuel utilisateur

haacon

haacon 1889.10 Manuel utilisateur

Protekt

Protekt AT 252 Manuel utilisateur

R. Beck Maschinenbau

R. Beck Maschinenbau HS 600 Manuel utilisateur

Nova Technology International, LLC

Nova Technology International, LLC NAS Series Manuel utilisateur

Genie

Genie Z-60/34 Manuel utilisateur

Screen Technics

Screen Technics INTERFIT Vertical Up Lift Manuel utilisateur

Mortuary Lift

Mortuary Lift ULTIMATE 1000 Manuel utilisateur

Custom Equipment

Custom Equipment Hy-Brid 3 Series Manuel de programmation

Custom Equipment

Custom Equipment Hy-Brid Lifts 2 Series Manuel de programmation

Hy-Brid Lifts

Hy-Brid Lifts HB-P3.6 Manuel de programmation

BERG

BERG BeNomic EasyLeaf Manuel utilisateur

Powermate

Powermate LiftGate LG-3 Manuel utilisateur

Snorkel

Snorkel TM12 Series Manuel utilisateur

Terberg

Terberg OMNIDEKA Manuel utilisateur

Harmar Mobility

Harmar Mobility AL625 Mode d'emploi

Rotary

Rotary SPO16 Manuel utilisateur