GLO-TOOB Lithium & IR Manuel utilisateur
Waterproof to 3,500 meters
(11,500 feet)
ONLY WHEN TWIST CAP IS USED
11 Modes to choose from
Powered by 10 Year Shelf
Life Lithium Battery
Virtually indestructible
Battery life 24-100 hours
Battery life 20-80 hours (IR)
(dependent on mode
selection)
LITHIUM
User Guide
Pat.No.US7218241
MODES
11
High intensity waterproof light source
BATTERY TYPE
CR123A 3V
CR123A Lithium Battery
Detachable Lanyard
Protector Cover
Twist Waterproof Cap
Push Button Cap
Viewing Angle...................................... 360
Durability.............................................................. High-impact resistant
Colors available ...................................... Red, Amber, Blue, Green, White & Infra-Red
Buoyancy ............................................................................................... Negative
Working Temperature ................................ -20 C to +80 C (-4 F to 176 F )
Weight .................. 62g (2.18 oz)
Dimensions ................................ 80mm x 24mm (3.15in x 0.95in)
Shape ................................. Cylindrical
LED Life ....................................... Approx. 100,000 hrs
Battery Life .............. 24 to 100 hours (Dependent on mode)
Light Source ........................... High Bright LED’s
SPECIFICATIONS
GLO-TOOB Body
HALF FLASH
PULSE
SOS
SLOW STROBE
BEACON STROBE
EQUAL FLASH
25% Constant on
100% Constant on
FAST STROBE
RAMP UP
BOUNCE
The GLO-TOOB Lithium & IR allows you to select one of its 11 modes as your LOCKED mode. This LOCKED mode is the
mode the unit will activate when you turn it ON. In order to select or modify your LOCKED mode, follow these simple steps.
When you now switch the unit OFF and ON again, it will activate your new LOCKED mode. Repeat STEPS 1-3 if you would
like to change your LOCKED mode again.
STEP 1: Switch the GLO-TOOB Lithium ON - count 5 seconds and then switch
the unit OFF and then ON again (this will activate the programming mode).
STEP 2: Now, by repeatedly switching the unit ON and OFF you will cycle through
the 11 different pre-programmed modes.
STEP 3: In order to select and store a new LOCKED mode, leave the unit on that
particular mode for 4 seconds or longer.
SELECTING A MODE
TM
KEY FEATURES
0
0 0 0 0
875nm
& 950nm
*
*
www.glo-toob.com
& 875nm
950nm
CAUTION: Infrared versions of this
model may only be seen with night
imaging equipment and NOT the
naked eye.
The Push Button Splashproof Cap is
designed for above water use only.
Simply depress the rubber cap to
turn ON or OFF to cycle through
the multi-mode functions. This cap
is equipped with a STRONG 40cm(15.7”)
DETACHABLE LANYARD.
The Twist ON/OFF Waterproof Cap allows the
GLO-TOOB to be switched ON or OFF under-
water at any depth. CAUTION: TAKE CARE
TO ONLY TURN THE PLASTIC CAP WHILE
UNDERWATER SO AS NOT TO LOOSEN
THE CAP AND CAUSE ACCIDENTAL
FLOODING. This cap is equipped with an
EXTRA STRENGTH STAINLESS STEEL
ATTACHMENT RING.
When the cap is not in use, use the protector cover to ensure
no water comes in contact with the conductive threads.
Push Button Splashproof Lanyard Cap Twist On/Off Waterproof Cap
CAP SPECIFICATIONS
Push Button Splashproof
Lanyard Cap
Detachable Lanyard & Clip Large Stainless Steel split-ring
Yes Yes
Low impact
Push button Twist ON / OFF
Splashproof 3,500 meters (11,500 feet)
1 x Nitrile washer
1 x Nitrile washer
Twist On/Off Waterproof Cap
Waterproof
Seal type
Attachment type
Switch type
Strength
Working temperature
Aircraft grade aluminum
with hard coat anodizing
Low impact
Thread
Protector Cover
-20 C to +80 C (-4 F to 176 F ) -20 C to +80 C (-4 F to 176 F )
The manufactures of GLO-TOOB warrants each GLO-TOOB to be free from defects in material and workmanship.
Under this warranty the manufactures of GLO-TOOB obligation is limited to replacing or repairing any GLO-
TOOB returned to us and found to be defective in either material or workmanship.
This warranty excludes the following: 1. Battery Leakage (determine the brand of the battery and follow
that battery manufacture’s instructions on how to make a damage claim). 2. LED Burnout. 3. Failure of or
damage to GLO-TOOB due to misuse and/or lack of maintenance. 4. Accidental flooding of the GLO-
TOOB by exposing the battery chamber to moisture/water.
For WARRANTY INFORMATION or REPAIR INSTRUCTIONS, please visit out our website at:
www.glo-toob.com
In order to prolong the life of your GLO-TOOB, it is recommended that preventive maintenance is
performed on a periodic basis as follows:
1. Exposure to Saltwater
After saltwater exposure it is highly recommended that the GLO-TOOB is rinsed in fresh water and
then dried before opening. This will reduce the possibility of corrosion and extend the life of your
GLO-TOOB.
2. Contact surfaces
All GLO-TOOB caps have conductive aluminum threads to hold the caps in place as well as to
conduct power. Should the threads come into contact with water, an aluminum oxide layer will be
formed around the threads possibly rendering the contact area faulty. For this reason please make
sure the threads stay dry and clean. Use the universal protector cover to keep threads dry and clean
when not in use around wet environments.
3. Washer (seal)
The washer on the inside of the caps must be checked each time before the GLO-TOOB is
submersed in water. If the washer is cracked or cut, replace the washer immediately. Also check for
general cleanliness of the washer to ensure that particles do not affect the watertight seal.
4. Battery
Leaking batteries can corrode the inside of your GLO-TOOB. It is therefore recommended that
you open your GLO-TOOB once a month and check the battery for signs of leakage and / or
corrosion. It is also recommended that you remove the batteries from your GLO-TOOB and store
them separately if you use your GLO-TOOB infrequently.
Care and Maintenance
LIMITED LIFETIME WARRANTY
Table des matières
