Glen Dimplex System M Compact Plus 6kW Guide de l'utilisateur

Order no.: DOK4x HOIAO WxDEN EN · FD 9912

System M

Compact Plus 6kW

Installation and

Operating Instruction

Air-to-Water

Heat Pump

in Integral Design

Glen

Dimplex

Thermal

Solutions

Dimplex

06CHOIAOC6

06IHOIAOC6

www.gdts.one DOK4x HOIAO WxDEN · FD 9912 1

Air-to-water heat pump 6 kW English

Table of contents

1 Please read immediately...................................................................................................................................3

1.1 Intended use............................................................................................................................................................................. 3

1.2 Legal regulations and directives ........................................................................................................................................ 3

1.3 Energy-efficient use of the heat pump............................................................................................................................ 3

2 Intended use of the heat pump ......................................................................................................................4

2.1 Area of application.................................................................................................................................................................. 4

2.2 Operating principle................................................................................................................................................................. 4

3 Scope of supply ..................................................................................................................................................5

3.1 Indoor unit ................................................................................................................................................................................. 5

3.2 Outdoor unit.............................................................................................................................................................................. 6

4 Transport..............................................................................................................................................................7

4.1 Outdoor unit.............................................................................................................................................................................. 7

4.2 Indoor unit ................................................................................................................................................................................. 7

4.3 Removing the refrigeration circuit .................................................................................................................................... 8

5 Installation ...........................................................................................................................................................9

5.1 Outdoor unit.............................................................................................................................................................................. 9

5.2 Indoor unit ...............................................................................................................................................................................10

5.3 Acoustic emissions...............................................................................................................................................................10

6 Assembly / connection.................................................................................................................................. 11

6.1 Assembly of the refrigerant line and electric wire .....................................................................................................11

6.2 Condensate drain..................................................................................................................................................................11

6.3 Connection on heating side ..............................................................................................................................................11

6.4 Domestic hot water connection ......................................................................................................................................12

6.5 Temperature sensor connection .....................................................................................................................................13

6.6 Electrical connection ...........................................................................................................................................................14

6.7 Refrigerant pipe connections ...........................................................................................................................................17

7 Commissioning ................................................................................................................................................ 20

7.1 General......................................................................................................................................................................................20

7.2 Preparation..............................................................................................................................................................................20

7.3 Procedure ................................................................................................................................................................................20

8 Cleaning / maintenance ................................................................................................................................ 21

8.1 Maintenance ...........................................................................................................................................................................21

8.2 Cleaning the indoor unit .....................................................................................................................................................21

8.3 Cleaning the domestic hot water cylinder....................................................................................................................21

8.4 Cleaning the outdoor unit ..................................................................................................................................................21

9 Faults / troubleshooting................................................................................................................................ 22

10 Decommissioning / disposal ........................................................................................................................ 22

11 Device information ......................................................................................................................................... 23

12 Dimension drawing......................................................................................................................................... 25

12.1 Dimension drawing outdoor unit.....................................................................................................................................25

12.2 Dimension drawing indoor unit ........................................................................................................................................26

12.3 Dimension drawing legend................................................................................................................................................27

13 Diagrams ........................................................................................................................................................... 28

13.1 Characteristic curves heating 6 kW ................................................................................................................................28

14 Product information as per Regulation (EU) No 813/2013, Annex II, Table 2.................................. 29

16 Information on the use of data..................................................................................................................... 32

2 DOK4x HOIAO WxDEN · FD 9912 www.gdts.one

English Air-to-water heat pump 6 kW

17 Declaration of conformity............................................................................................................................. 33

www.gdts.one DOK4x HOIAO WxDEN · FD 9912 3

Air-to-water heat pump 6 kW English

1 Please read immediately

1.1 Intended use

This device is only intended for use as specified by the manu-

facturer. Any other use beyond that intended by the manufac-

turer is prohibited. This requires the user to abide by the rele-

vant project planning documents. Please refrain from

tampering with or altering the device.

1.2 Legal regulations and directives

This heat pump is designed for use in a domestic environment

according to Article 1, Paragraph 2 k) of EC directive 2006/42/

EC (machinery directive) and is thus subject to the require-

ments of EU directive 2014/35/EU (low-voltage directive). It is

thus also intended for use by non-professionals for heating

shops, offices and other similar working environments, agricul-

tural establishments and hotels, guesthouses and other resi-

dential buildings.

The construction and design of the heat pump complies with all

relevant EU directives, DIN and VDE regulations.

When connecting the heat pump to the power supply, the rele-

vant VDE, EN and IEC standards are to be adhered to. Any fur-

ther connection requirements stipulated by local utility compa-

nies must also be observed.

When connecting the heating system, all country-specific reg-

ulations must also be adhered to.

This unit can be used by children aged 8 and over and by per-

sons with limited physical, sensory or mental aptitude or lack of

experience and/or knowledge, providing they are supervised or

have been instructed in the safe use of the unit and understand

the associated potential dangers.

Children must not play with the device. Cleaning and user

maintenance must not be carried out by children without su-

pervision.

ATTENTION!

Work on the heat pump must only be performed by author-

ised and qualified after-sales service technicians!

HINWEIS

ºººººº

NOTE

When operating or maintaining a heat pump, the legal require-

ments of the country where the heat pump is operated apply.

Depending on the refrigerant fill quantity, the heat pump

must be inspected for leaks at regular intervals by a certified

technician, and these inspections must be recorded.

1.3 Energy-efficient use of the heat

pump

By operating this heat pump you are helping to protect our en-

vironment. The heating system must be properly designed and

dimensioned to ensure efficient operation. It is particularly im-

portant to keep water flow temperatures as low as possible in

heating operation. All connected heat consumers should there-

fore be suitable for low flow temperatures. Raising the heating

water temperature by 1 K corresponds to an increase in electric

energy consumption of approx. 2.5 %. Low-temperature heat-

ing systems with flow temperatures between 30 °C and 50 °C

are particularly well-suited for energy-efficient operation.

4 DOK4x HOIAO WxDEN · FD 9912 www.gdts.one

English Air-to-water heat pump 6 kW

2 Intended use of the heat pump

2.1 Area of application

The air-to-water heat pump is to be used exclusively for heating

of heating water and domestic hot water. It can be used in new

or existing heating systems.

The heat pump is suitable for mono energy operation at

outside air temperatures as low as -22 °C.

Proper defrosting of the evaporator is guaranteed by maintain-

ing a heating water return temperature of more than 20 °C dur-

ing continuous operation.

It is not designed for the increased heat consumption required

when a building is being dried out. For this reason, the addi-

tional heat consumption should be met using special devices

provided by the customer.

2.2 Operating principle

Surrounding air is drawn in by the fan and fed through the evap-

orator (heat exchanger). The evaporator cools the air, i.e. ex-

tracts heat from it. This extracted heat is then transferred to the

working medium (refrigerant) in the evaporator.

The heat is "pumped" to a higher temperature level by increas-

ing its pressure with the aid of the electrically driven compres-

sors. It is then transferred to the heating water via the liquefier

(heat exchanger).

Electrical energy is used to raise the temperature level of the

heat from the environment. Because the energy extracted from

the air is transferred to the heating water, this type of device is

referred to as an air-to-water heat pump.

The air-to-water heat pump consists of the main components

evaporator, fan and expansion valve, as well as the compres-

sors, the liquefier and the electrical control system.

At low ambient temperatures, humidity accumulates on the

evaporator in the form of frost, reducing the transfer of heat.

Uneven accumulation during this process does not indicate a

fault. The evaporator is defrosted automatically by the heat

pump as required. Under certain atmospheric conditions,

steam may be emitted from the air outlet.

www.gdts.one DOK4x HOIAO WxDEN · FD 9912 5

Air-to-water heat pump 6 kW English

3 Scope of supply

3.1 Indoor unit

Hydraulic systems

1) Combination cylinder, consisting of:

26 l buffer tank and domestic hot water cylinder

with 151 l capacity

2) Domestic hot water sensor

3) Flange with magnesium anode

4) Drainage domestic hot water cylinder

5) Purging

6) Safety valve, start-to-leak pressure 2.5 bar

7) Expansion vessel (18 l)

8) 3-way reversing valve for generating domestic hot water

9) Switch box with heating controller

10) Overflow valve to guarantee the minimum heating water

flow rate (to be set by the installer)

11) Universal hardware interface

12) Electric additional heater (2, 4 or 6 kW) for higher domestic

hot water temperatures and for heating support

13) Regulated circulating pump for an unmixed heating circuit

14) Test connection expansion vessel

Refrigeration circuit

15) Filter dryer

16) Refrigeration circuit controller switch box

17) Compressor

18) 4-way reversing valve

19) Liquefier

20) Connections for refrigerant lines

6 DOK4x HOIAO WxDEN · FD 9912 www.gdts.one

English Air-to-water heat pump 6 kW

3.2 Outdoor unit

1) Evaporator

2) Fan

3) Expansion valve

4) Switch box

5) Connection for refrigerant line

www.gdts.one DOK4x HOIAO WxDEN · FD 9912 7

Air-to-water heat pump 6 kW English

4 Transport

4.1 Outdoor unit

A pallet should be used to transport the heat pump to its final

installation location. The outdoor unit can be transported with a

lift truck, hand truck or similar.

Once the side sections have been removed, the outdoor unit

can be lifted by the cover. For this, loosen the two screws at the

top, tilt the metal plate to the side and remove at the top (see

step 1-3)

4.2 Indoor unit

A lift truck is suited for transporting the unit on a level surface.

Carrying straps may be used if the heat pump needs to be

transported on an uneven surface or carried up or down stairs.

These straps can be passed directly underneath the pallet.

To lift from the pallet, the indoor unit can be tilted back by up to

45° and lifted by the handles on the back at the top. Tilting over

45° is not permitted without removing the refrigeration circuit

beforehand.

To remove the refrigeration circuit, remove the side plate at the

bottom right.

The casing panels must be dismantled in the order outlined be-

low.

The bottom side panel must be removed first.

For this, loosen the screws on the bottom side section, turn out

the panel slightly and pull it out to the front (see step 1-3).

Secondly, remove the top side panel.

To do this, loosen the screws, fold out the panel slightly and re-

move the facade panel at the top (see step 4-6).

The front panel can then be removed.

For this, loosen the 4 screws on the frame at the side. Push the

panel approx. 10 mm to the right, then push it forwards slightly

and remove at the top (see step 7-9). Disconnect the connec-

tion cables to the display on the universal hardware interface.

45°

max.

Tilting dimension 2190

8 DOK4x HOIAO WxDEN · FD 9912 www.gdts.one

English Air-to-water heat pump 6 kW

4.3 Removing the refrigeration

circuit

To make transport easier, the refrigeration circuit can be dis-

mantled and transported separately. Removing it enables the

indoor unit to be transported horizontally.

The following connections must be disconnected:

1) Disconnect the water circuit connection

2) Disconnect the plug connections on the refrigeration cir-

cuit switch box

3) Loosen the mounting screws

4) Pull the refrigeration circuit out at the side and transport it

to the intended location

ATTENTION!

In installed and dismantled state, the refrigeration circuit may

only be tilted by a maximum of 45° (in each direction).

After the final positioning at the installation location, remove

the transport fastening on the sprung floor of the compressor

on both sides.

ATTENTION!

Before commissioning, the transport fastening must be re-

moved.

1. (2x)

3. (2x)

2. (2x)

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Glen Dimplex Pompe à chaleur

Glen Dimplex

Glen Dimplex LA 60S-TUR Guide de l'utilisateur

Glen Dimplex

Glen Dimplex LIK 8TES Guide de l'utilisateur

Glen Dimplex

Glen Dimplex HPL 9S-TUW Guide de l'utilisateur

Glen Dimplex

Glen Dimplex LAK 9IMR-TP Guide de l'utilisateur

Glen Dimplex

Glen Dimplex LA 1118CP Guide de l'utilisateur

Glen Dimplex

Glen Dimplex HPL 6S-TUW Guide de l'utilisateur

Glen Dimplex

Glen Dimplex System M Compact 4/6 kW Guide de l'utilisateur

Glen Dimplex

Glen Dimplex HPL 6S-TUW2 Guide de l'utilisateur

Glen Dimplex

Glen Dimplex LAK 3IMR Guide de l'utilisateur

Glen Dimplex

Glen Dimplex LA 33TPR Instructions d'utilisation et d'entretien

Glen Dimplex

Glen Dimplex HPL 9S-TUW2 Guide de l'utilisateur

Glen Dimplex

Glen Dimplex SI 50TUR Guide de l'utilisateur

Glen Dimplex

Glen Dimplex System M Comfort 9/12 kW Guide de l'utilisateur

Glen Dimplex

Glen Dimplex LA 60TU-2 Guide de l'utilisateur

Glen Dimplex

Glen Dimplex LA 1118C Guide de l'utilisateur

Glen Dimplex

Glen Dimplex LAW 9IMR Guide de l'utilisateur

Glen Dimplex

Glen Dimplex System M Comfort Plus C 16 kW Manuel utilisateur

Glen Dimplex

Glen Dimplex LI 9TU Guide de l'utilisateur

Glen Dimplex

Glen Dimplex System M Comfort Plus 16 kW Manuel utilisateur

Glen Dimplex

Glen Dimplex System M Comfort C 9/12 kW Guide de l'utilisateur

Glen Dimplex

Glen Dimplex LA 3860 Guide de l'utilisateur

Glen Dimplex

Glen Dimplex LIH 10TE Guide de l'utilisateur

Glen Dimplex

Glen Dimplex LI 11TES Guide de l'utilisateur

Glen Dimplex

Glen Dimplex LA 60TUR+ Guide de l'utilisateur

Manuels Pompe à chaleur populaires d'autres marques

MICROWELL

MICROWELL HP 1000 GREEN Manuel utilisateur

Sanyo

Sanyo SAP120FCH Manuel utilisateur

Daikin

Daikin EHYHBH05AA Manuel utilisateur

Panasonic

Panasonic WH-SDF03E3E5 Mode d’emploi

Bryant

Bryant 544B Manuel utilisateur

Airxcel

Airxcel 45000 Series Manuel

Mitsubishi Electric

Mitsubishi Electric PUZ-SWM60VAA Manuel utilisateur

Dimplex

Dimplex LI 16I-TUR Guide de l'utilisateur

Carrier

Carrier WSHP Open v3 Guide de configuration rapide

TGM

TGM CTV14CN018A Manuel utilisateur

Carrier

Carrier 38MGQ Series Manuel utilisateur

Kokido

Kokido K2O K880BX/EU Guide de dépannage

Viessmann

Viessmann VITOCAL 300-G PRO Type BW 2150 Guide rapide

Carrier

Carrier 48EZN Manuel utilisateur

Viessmann

Viessmann KWT Vitocal 350-G Pro Series Mode d'emploi

Ariston

Ariston NIMBUS Manuel utilisateur

Weishaupt

Weishaupt WWP L 7 Guide de l'utilisateur

GE Zoneline AZ85H09EAC Manuel utilisateur