GIVI I303S Manuel utilisateur
I303S
Bluetooth®Headset & Intercom
for Scooters and Motorcycles
User's Guide
givimoto.com
2
I303S
CONTENTS
1. INTRODUCTION .................................................................................3
2. PACKAGE CONTENTS ........................................................................4
Installing the I303S on Your Helmet - Attachable Boom Microphone Type.. 5
3. GETTING STARTED .............................................................................5
Powering On................................................................................................. 6
Powering Off................................................................................................. 6
Charging the I303S ...................................................................................... 7
Checking Battery Level ................................................................................ 7
Adjusting the Volume Level.......................................................................... 8
Function Priority............................................................................................ 8
Fault Reset.................................................................................................... 8
4. OPERATION QUICK REFERENCE ......................................................9
Mobile Phone Pairing ................................................................................. 11
Multipoint Mobile Phones Pairing ............................................................... 11
5. PAIRING AND USING THE I303S WITH BLUETOOTH DEVICES.....11
Bluetooth Stereo Device Pairing................................................................. 12
Bluetooth GPS Navigation Pairing.............................................................. 12
Mobile Phone Call Making and Answering ................................................ 15
Stereo Music............................................................................................... 15
6. INTERCOM CONVERSATION ...........................................................16
Pairing with Other I303S Headsets for Intercom Conversation.................. 16
Starting and Ending Intercom Conversation .............................................. 16
Intercom and Mobile Phone Call................................................................ 16
Intercom Failure.......................................................................................... 17
Intercom Reconnection .............................................................................. 17
7. I303S CONFIGURATION SETTING ...................................................17
Enabling/Disabling Voice Activated Phone Answering .............................. 18
Enabling/Disabling Voice Prompts ............................................................. 18
Delete All Bluetooth Pairing Information..................................................... 18
Reset to Factory Default Setting................................................................. 19
Exit Voice Conguration Menu ................................................................... 19
8. FIRMWARE UPGRADE ......................................................................20
CERTIFICATION AND SAFETY APPROVALS..........................................20
FCC Compliance Statement....................................................................... 20
FCC RF Exposure Statement...................................................................... 21
FCC Caution............................................................................................... 21
CE Declaration of Conformity..................................................................... 21
Industry Canada Statement ....................................................................... 21
Bluetooth License....................................................................................... 21
WEEE (Waste Electrical and Electronic Equipment ) ................................. 22
SAFETY INFORMATION ...........................................................................22
Product Storage and Management............................................................ 22
Product Use................................................................................................ 23
Battery ........................................................................................................ 24
PRODUCT WARRANTY AND DISCLAIMER.............................................25
Limited Warranty ........................................................................................ 25
Warranty Exclusions ................................................................................... 27
Warranty Service ........................................................................................ 28
Return for Full Refund ................................................................................ 28
3
English
I303S
1. INTRODUCTION
Thank you for choosing the GIVI I303S, Bluetooth Headset and Intercom
for Scooters and Motorcycles. With the I303S, you can call handsfree on
your Bluetooth mobile phone, listen to stereo music or GPS navigation
voice instructions via Bluetooth, and have intercom conversations in full
duplex with a passenger or other riders.
The I303S is compliant with the Bluetooth specication 3.0 supporting
the following proles: Headset Prole, Hands-Free Prole (HFP),
Advanced Audio Distribution Prole (A2DP), and Audio Video Remote
Control Prole (AVRCP). Please conrm compatibility with other devices
with the manufacturers.
Please read this user guide carefully before using the headset. Also
visit www.givimoto.com for the latest version of the user guide and for
additional information related to GIVI products.
The I303S includes the following features:
• Bluetooth handsfree for Bluetooth mobile phones
• Bluetooth stereo headset for Bluetooth stereo devices such as MP3
players
• Bluetooth stereo headset for Bluetooth GPS navigations
• Bluetooth intercom up to 200 meters (220 yards)*
• Easy two-button operation
• Installation friendly unibody design
• Firmware upgradeable
Key Specications:
• Bluetooth 3.0
• Supporting proles: Headset Prole, Hands-Free Prole (HFP),
Advanced Audio Distribution Prole (A2DP), Audio Video Remote
Control Prole (AVRCP)
* in open terrain
4
I303S
2. PACKAGE CONTENTS
Microphone
connector (–) Button
(Intercom)
(+) Button
(Phone, Music)
DC Power Charging &
Firmware Upgrade Port
Status LED
Speakers
Pin-hole
Reset Button
Attachable Boom Microphone Type
Attachable Boom Microphone USB Power & Data Cable
Hook and Loop Fasteners
for Speakers
Hook and Loop Fastener
for Microphone
Microphone Sponges Double Sided Adhesive Tape
Wired Mircophone
5
English
I303S
3. GETTING STARTED
Installing the I303S on Your Helmet - Attachable
Boom Microphone Type
1. Peel off the hook fasteners for the speakers and attach them on the
back sides of the speakers.
2. Attach the loop fasteners for the speakers in the deep ear pockets of
your helmet.
3. Place the speakers in the helmet along with the hook and loop
fasteners, centered to your ear.
4. Locate a suitable surface on the left side of your helmet to attach
the unit, clean the location with a moistened towel, and allow to dry
thoroughly.
5. Peel off the adhesive tape covers of the control unit and attach it on
your helmet.
6. Attach the hook and loop fastener for the boom microphone between
the internal helmet cheek pad and the internal wall of the helmet
shell. Place the attachable boom microphone on the hook and loop
fastener and attach the microphone connector to the 2 pin connector
of the main unit cable. The microphone should be mounted so it is
positioned close to your mouth when you are wearing the helmet.
7. Hide the wire under the helmet padding after the installation.
1
2
6
I303S
3
4
5
Powering On
Press and hold the (+) Button and the (–) Button at the same time for 1
second to power on. The blue LED turns on and you will hear ascending
beeps and “Hello”.
Powering Off
Press the (+) Button and the (–) Button at the same time. The red LED
turns on for about 2 seconds until it turns off completely and you will hear
“Goodbye” and descending beeps.
7
English
I303S
Note:
1. The USB power & data cable is also used for firmware upgrade of the I303S.
2. The USB wall charger is not included in the package. Any 3rd party USB
charger can be used with GIVI products if the charger is approved by either
FCC, CE, IC, or other locally approved agencies that GIVI accepts. Please
contact GIVI regarding locally approved agencies GIVI accepts.
Checking Battery Level
You can check the battery level in two different ways when the headset
is powering on.
LED Indicator
When the headset is powering on, the red LED ashes rapidly indicating
the battery level.
LED Status
4 ashes High, 70~100%
3 ashes Medium, 30~70%
2 ashes Low, 0~30%
Charging the I303S
You can charge the I303S by connecting the supplied USB power & data
cable into a computer USB port or USB wall charger. You can use any
standard micro-USB cable to charge the I303S. The LED turns red while
charging, and turns blue when the headset is fully charged. It takes
about 2.5 hours to fully charge.
Note:
Please make sure to take off your I303S-installed helmet while charging.
8
I303S
Voice Prompt Indicator
When you power on the headset, keep pressing and holding the (+)
Button and (–) Button simultaneously for about 3 seconds until you hear
three high tone beeps. Then you will hear a voice prompt indicating the
battery level. However, if you release the buttons as soon as the headset
turns on, you will not hear the voice prompt for the battery level.
Low Battery Warning
When the battery is low, the blinking blue LED in stand-by mode turns to
red and you will hear mid-tone triple beeps and a voice prompt saying
“Low battery”.
Adjusting the Volume Level
You can easily adjust the volume by pressing the (+) Button or the
(–) Button. You will hear a beep when the volume reaches maximum
or minimum level. The volume is set and maintained independently at
different levels for each audio source even when you turn off and on
the headset. For example, once you set the volume for mobile phone
handsfree, it will not change even if you adjust the volume when you
hear Bluetooth MP3 music. So you can always maintain the preferred
optimum volume level for each audio source.
Function Priority
The I303S operates in the following order of priority:
(Highest) Mobile Phone
Intercom
(Lowest) Bluetooth Stereo Music
A lower priority function is always interrupted by a higher priority function.
For example, stereo music is interrupted by an intercom call, and intercom
conversation is interrupted by an incoming mobile phone call.
Fault Reset
When the I303S is not working properly or is in faulty status for any
reason, you may reset by pushing the pin-hole reset button on the left
speaker unit. Insert a paper clip into the reset pin-hole and press and
hold the reset button for a second with light pressure. The I303S will be
switched off. Turn the system back on and try again. However, this will
not restore the headset to factory default settings.
9
English
I303S
4. OPERATION QUICK REFERENCE
Function Operations
Power
On/Off
1 sec. 1 sec.
+
Power On
1 press 1 press
+
Power Off
Volume
Adjustment
1 press 1 press
or
Intercom
Pairing
pairing
AB
1) 5 sec. 5 sec.
2) 1 sec.
Function Operations
Bluetooth
Pairing
(Phone, MP3,
GPS)
1)
I303S v1.0
5 sec.
2)
I303S v1.0
Select GIVI I303S
3)
I303S v1.0
Enter PIN
Start & End
Intercom
Conversation
1 sec.
Conguration
10 sec.
10
I303S
Function Operations
Mobile
Phone
Answer
or
1 press
End
2 sec.
Voice Dial
*
3 sec.
*
3 sec.
Reject
2 sec.
Function Operations
Music
1 sec.
2 sec.
2 sec.
* You can use “Voice Dial” and “Redial” only in stand-by mode.
Autres manuels pour I303S
1
Table des matières
