GIONIEN GTM724T Fiche technique
Ceramic Hob
Instruction Manual / Installation Manual
MODEL: GTM724T
2
Safety Warnings
Your safety is important to us.Please read this
information before using your cooktop.
The appliance is not to be used by persons
(including children) with reduced physical,
sensory or mental capabilities,or lack of
experience and knowledge,unless they have
been given supervision or instruction.Children
being supervised not to play with the
appliance.Cleaning and user maintenance
shall not be made by children without
supervision.
WARNING:The appliance and its accessible
parts become hot during use.
Care should be taken to avoid touching
heating elements.
Children less than 8 years of age shall be kept
away unless continuously supervised.
Warning:If the surface is cracked,switch off
the appliance to avoid the possibility of electric
shock,for hob surfaces of glass-ceramic or
similar material which protect live parts.
Warning:A steam cleaner is not be used.
That the appliance is not intended to be
operated by means of external timer or
separated remote-control system.
Danger of fire:Do not store items on the
cooking surfaces.
3
CAUTION:The cooking process has to be
supervised.A short term cooking process has
to be supervised continuously.
WARNING:Unattended cooking on a hob with
fat or oil can be dangerous and may result in a
fire.
If the supply cord is damaged,it must be
replaced by the manufacturer,its service
agent or similarly qualified persons in order to
avoid a hazard.
Never try to extinguish a fire with water,but
switch off the appliance and then cover flame
e.g. with a lid or a fire blanket.
WARNING:Use only hob guards designed by
the manufacturer of the cooking appliance or
indicated by the manufacturer of the appliance
in the instructions for use as suitable or hob
guards incorporated in the appliance.The use
of inappropriate guards can cause accidents.
Power cord can’t accessible after installation.
Congratulations on the purchase of your new Ceramc Hob.
We recommend that you spend some time to read this Instruction / Installation
Manual in order to fully understand how to install correctly and operate it.
For installation, please read the installation section.
Read all the safety instructions carefully before use and keep this Instruction /
Installation Manual for future reference.
4
Product Overview
Top View
Heating zone Power
Heating Zone Max.Power（220-240V~ 50/60Hz）
2200W/1100W(230~)
(Double ring)
1200W(230~)
2000W/1100W(230~)
1800W(230~)
Total Rating Power 7200W(230~)
5
User interface
Reference Description
AZone Select Key
BON/OFF Key
CPower Regulating Key(Reduce)
DPower Regulating Key(Increase)
E
Double Ring Control Key
FChild Lock Key
GTimer Key
-
邑
． ． ．
．
．
•••
6
Product functions
> The ceramic hob caters for all kind of cooking,with its radiant heat
cooking zones and its electronic touch controls and multi-functions,
making it the ideal choice for the modern family.
> The ceramic hob is extremely user-friendly,durable and safe.
Special functions
Protection from over-heating
A sensor monitors the temperature in the cooking zones.When the
temperature exceeds a safe level,the cooking zone is automatically
switched off.
Residual heat indicator
When the hob has been operating for some time,there will be some
residual heat. The letter “H” appears to warn you that it is too hot to
touch the surface.
Auto Shutdown Protection
Auto shut down is a safety protection function for your ceramic hob.It shut down
automatically if ever you forget to turn off your cooking.The default working
times for various power levels are shown in the below table:
Power level
1-2
3-4
5
6-9
Default working timer (min)
360
300
240
90
Protection against unintended operation.
If the electronic control detects a button being held down for approx
10 seconds it will switch off automatically.The control sends out an
audible error signal to warn the sensors have detected the presence
of an object. The display will indicate an error code “ER03”.If the hob
is still hot,the display "H" and "0" flash alternatively.
7
Before using your New Ceramic Hob
• Read this guide,taking special note of the ‘Safety Warnings’ section.
• Remove any protective film that may still be on your Ceramic hob.
Using the Touch Controls
• The controls respond to touch,so you don’t need to apply any pressure.
• Use the ball of your finger,not its tip.
• You will hear a beep each time a touch is registered.
• Make sure the controls are always clean,dry,and that there is no object (e.g. a
utensil or a cloth) covering them.Even a thin film of water may make the
controls difficult to operate.
Choosing the right Cookware
Do not use cookware with jagged edges or a curved base.
Make sure that the base of your pan is smooth,sits flat against the glass,and is the
same size as the cooking zone.Use pans whose diameter is as large as the graphic
of the zone selected.Using a pot a slightly wider energy will be used at its
maximum efficiency.If you use smaller pot efficiency could be less than expected.
Always centre your pan on the cooking zone.
8
Always lift pans off the ceramic hob – do not slide,or they may scratch the glass.
Using your Ceramic Hob
To start cooking
1.Place a suitable pan on the cooking zone that
you wish to use.
• Make sure the bottom of the pan and the surface
Of the cooking zone are clean and dry.
2.Touch the ON/OFF key for 1 second.
After power on, the buzzer beeps once, all displays
show “ 0 “, indicating that the ceramic
hob has entered the state of standby mode.
3.According to the heating zone where the pan is placed, select a relevant zone
select key by pressing key (A).The symbol 0. selected will be flashing.
4.Select the power level by pressing the “+”key (D) or “-”key(C)
5.The power level will start at 0.Pressing the “+”will count up the power levels
from 0 to 9 in numerical order.Pressing the “-”key will take the power straight
9
from 9 to 0.
• If you don’t choose a heat setting within 20 seconds, the ceramic hob will
automatically switch off. You will need to start again at step 2.
• You can modify the heat setting at any time during cooking.
Using Child Lock Function
• You can lock the controls to prevent unintended use (for example children
accidentally turning the cooking zones on).
• When the controls are locked, all the controls except the OFF control are
disabled.
To lock the controls
Touch the child lock key for 3 seconds.The indicator above the child lock key
will be on and the timer indicator will show “Lo “.
To unlock the controls
1.Make sure the hob is turned on.
2.Touch and hold the keylock control for a while.
3.You can now start using your ceramic hob.
When the hob is in the lock mode,all the controls are disable except OFF,you can
always turn the hob off with the OFF control in an emergency,but you shall unlock
the hob first in the next operation .
Using the Timer
• You can set it to turn one cooking zone off after the set time is up.
• You can set the timer for up to 99 minutes.
1.Select the relevant cooking zone which is working by touching the zone select
key (A).
2.Press the timer key ,the timer indicators will show “10”.
． ． ．
．
．
•••
10
3.Using the “ “ or ” ” buttons,you can realize the setting of timing from 1 to 99
minutes.
4.When the time is set,it will begin to count down immediately.The red dot next to
power level indicator will illuminate indicating that zone has set timer.
5.If you need to check the remaining time,you can operate step 1 and step 2
again.
6.When cooking timer expires, the corresponding cooking zone will be switch off
automatically.Other cooking zone will keep operating if they are turned on
previously.
• The timer function only work when at least one cooking is turned on.
• If you do not select any zone and touch the timer(G) directly to active the timer
function,it only work as a Minute Minder.Buzzer will only bips for seconds and the
timer indicator will turn off when the setting time finished,but cooking zones will
not be switch off and still working .
Using the Double ring zone
> You can set the double ring zone after the zone is working.
> You can set the zone working by double ring or single ring.
1.Turn on,the double ring work by default,the double ring indicator light on.
2.Press the double ring control key(E),the double ring indicator light off,then only
inner ring works.
Table des matières
Autres manuels GIONIEN Plaque
