GILMAN Gemini GGS175B Manuel utilisateur
1
MODEL NO 型號: GGS175B
PrOfESSiONaL
GarMENt StEaMEr
專業蒸汽掛燙機
A GILMAN GROUP BRAND
2
Caution! An electric appliance is not a toy! Never leave the appliance unsupervised
when in use. This appliance can be used by children older than 8 years and
persons with reduced physical, sensory or mental capabilities or lack of experience and
knowledge, but only if they have been given supervision or instruction concerning
use of the appliance in a safe way and understand the hazards involved.
1. Please read this manual carefully before use.
2. Please check the power supply voltage suits this appliance (220-240V~).
3. This appliance is for domestic use only.
4. Do not connect this appliance to a power supply with another high power
appliance connected to it.
5. Only use this appliance indoor.
6. Do not let children and disabled person use this appliance.
7. Do not let children to play with this appliance.
8. Please pay attention when this appliance is connected to a power source and
generating heat.
9. If this appliance is dropped or there is damage on the power cord / socket /
steam hose, please stop using it and bring it to our after-sales service center
for checking and repair.
10. Please ll the water tank with water before operating the appliance. Always
check the water level in the water tank during operation.
11. Only ll cold water to the water tank, do not use other types of liquid.
12. Do not shoot steam directly on human body and pets.
13. During operation, hold up the steam brush vertically instead of horizontally or
downwards to avoid water dripping out of the steam brush.
14. Do not lay the steam hose on the oor or bend it during operation.
15. Do not touch the steam brush panel or steam output during operation to
prevent scalding.
16. Make sure the appliance is turned off and completely cooled down before
changing the accessories.
17. Do not move this appliance by pulling the steam hose. You can move the
appliance by pushing the down rod.
18. Do not remove the power plug from power socket by pulling the power cord. Prevent
the power cord from sharp objects to avoid risk of damage to the power cord.
19. Only use the accessories supplied together with this appliance. Do not use
accessories not belong to this appliance as this may cause danger and damage
to the appliance.
20. Always handle the parts and accessories with care.
21. To extend the lifetime of this appliance, clean the water tank frequently.
22. Before storing the appliance, allow it to cool down completely for at least 30
minutes and also clear all water inside the water tank and machine body.
23. Always store the appliance in a dry and well-ventilated area.
3
A: Steam brush
B: Steam handle holder
C: Upper rod
D: Upper rod tightening screw
E: Middle rod
F: Middle rod tightening screw
G: Bottom rod
H: Rod connection cap
I: Water tank
J: Main machine
K: Front slide-wheels
L: Water drainage valve
M: Power control knob
N: Power indicating light
O: Hose connection kit
P: Steam hose
Q: Handle
R: R1-Brush head
R2 -
2 in 1 Line clip + Anti-dust brush
S: Flexible hanger
T: Position x hanger
L
L
M
N
O
P
T
Q
R1
R2
S
K
J
4
• Remove all packing materials of the main machine and accessories. Please
pay attention to take out all accessories on the side of packing materials.
• Insert the bottom rod into the rod connection cap on the appliance (Fig. 1). Fix
the rod tightly by turning the rod connection cap clockwise.
• Put the steam handle holder on top of the upper rod (Fig. 2).
• Unlock the tightening screw on all rods and extend the rod to the tallest, then
lock the position of the tightening screw again (Fig. 3)
• Fix the exible hanger onto the holder (Fig. 4).
• Attach the steam hose to the appliance main body and tighten the hose
connection kit by turning clockwise (Fig. 5).
• Hang the steam brush to the holder (Fig. 6).
1. Hang the steam brush back to the steam handle holder when not using the
appliance to avoid risk of scalding.
2. To ensure proper function of steam hose and steam brush, always extend the
rod to the tallest when operating the appliance.
3. Do not pull the steam hose with force or move the appliance by pulling the
steam hose. Otherwise, steam hose may be damaged.
Fig. 1 Fig. 2 Fig. 3
5
Before installing or uninstalling the 2 in 1 Line clip
+ Anti-dust brush on the steam brush, make sure
the appliance is completely off and cooled down.
Fig. 4
Fig. 5 Fig. 6
Insert the connecting corner to the base of the
steam brush and then push the clip up until both
accessories are completely xed together. (Fig 7)
Press the middle clip of the position x
hanger and hold onto the rod.
Rotate the two hanger clips upwards
Use the two hanger clips to x the
bottom of clothes or pants.
Moving the steam brush up and down
to let clothes or pants more straight and easy
to control.
Fig. 7
Fig. 8
base
Middle clip Hanger clips
6
Position the appliance on a at and rm oor and follow the steps in (Fig 9) to
ll water into the water tank.
1. Take out the water tank from the appliance.
2. Put the water tank upside down and then turn open the lid anti-clockwise.
3. Pour water into water tank.
4. Put back the water tank lid and tighten it by turning clockwise.
5. Put water tank back to appliance
Please do not add hot water into the water tank.
Place the full water tank onto the machine body.
Connect the power plug to the power socket. Switch
on the appliance by turning the Power / Control
knob in clockrise direction (Fig 10), then the power
indicating light will be on and the appliance starts
operation.
1. Turn the Power/Control knob to “1” position, the
appliance will generate moderate level of steam
which is suitable for silk and nylon, etc.
2. Turn the Power/Control knob to “2” position, the
appliance will generate high level of steam which
is suitable for cotton and linen, etc.
Fig 10
Fig 9
7
1. The key function of steam is to soften the fabric.
In order to straighten the fabric, it is recommended
to slightly pull the fabric downwards during steam
ironing. (Fig 11)
2. Put the steam brush close to the fabric and the
press slightly. By moving the steam brush around
the fabric, the steam can help to rm the fabric’s
shape.
3. Hold the bottom of the fabric and press the steam
brush on the fabric and move around in different
directions. (Fig 12)
4. When ironing the collar area, press harder onto
the fabric and stay on a little longer, iron the same
area for several times.
5. When ironing the sleeves area, press harder onto
the fabric and stay on a little longer, iron the same
area for several times.
6. When ironing trousers, hold the bottom of it and
move the steam brush up and down the fabric.
(Fig 13)
7. When making crease pattern on the trousers,
install the 2 in 1 Line clip + Anti-dust brush onto
the steam brush. Press the handle of the clip to
open up a gap between the steam brush. Place
the edge of the trousers into the gap and steam
iron the edge by moving the steam brush up and
down the edge. (Fig 14)
It is normal that there is water dripping noise inside
the steam hose during operation. If this happens, lift
up the steam hose to let the water droplets inside the
steam hose to fall back to the machine body.
Fig 11
Fig 12
Fig 13
Fig 14
8
After operation, turn the Power/Control knob to “OFF” position and unplug
the appliance from the power socket.
It is recommended to follow the below steps to store the appliance in good
condition:
1. Disconnect from the power supply.
2. Let the appliance to cool down completely (at least for 30 minutes).
3. Take out the water tank from the appliance, pour away the remaining water in
the tank and wipe the tank until it is dry.
4. Reduce the length of the rods to the shortest and remove the steam hose
from the main machine.
5. Turn open the water drainage valve by anti-clockwise direction and let the
water remained in the main machine to drain out completely. In order to avoid
any Injured, please wait at least 30 minutes and cool down before turn open
the water drainage valve.
6. Use clean and wet cloth to clean the water container and steam brush. Put
back the water drainage valve into appliance and rotate clockwise to lock the
water drainage valve until xed.
7. Install the steam hose onto the appliance and then hang the steam brush on
the steam handle holder.
8. Store the appliance in a dry and well-ventilated place.
Water hardness varies among different cities. There could be chances for
calcium residues in the water to remain in the appliance. The calcium may
accumulate inside the wall of steam hose and affect the power of steam.
Therefore, it is recommended to follow the below steps once a month for
better maintenance:
1. Switch off the appliance and disconnect it from the power source.
2. Remove the steam hose, rods away from the appliance.
3. Pour away all remaining water in the water tank.
4. Turn open the water drainage valve at the bottom of the appliance rotate
by anti clockwise and let the water remained in the main machine to drain
out completely. Put back the water drainage valve into the appliance and
rotate clockwise until lock . In order to avoid any Injured, please wait at
least an hour and cool down before turn open the water drainage valve.
9
5. Mix 100ml of vinegar and 100ml of cold clean water. Slowly drain the
mixed solution into the appliance via the steam hose connection kit. Do
not move during clean.
6. Keep this state for 1 hour.
7. Turn open the water drainage valve by anti-clockwise direction and let the
mixed solution to drain out completely.
8. Rinse cold clean water into the appliance via the steam hose connection
kit and let the water drain out for several times until the smell of vinegar
disappears.
9. Install all parts back to the main machine and the appliance is ready to be
used again.
Model no.: GGS175B
Voltage: 220-240V~
Frequency: 50/60Hz
Product dimension : (Main unit) 340(W) x 220(D) x 300(H) mm
(Main unit with rods)
340 (W) x 220 (D) x 1590 (H) mm
Capacity: 1.1 L
Power consumption: 1750W
brush.
brush.
brush.
brush
control
control knob
10
安全使用說明
警告 : 本產品不是玩具。使用時請勿遠離本機及需監察製作過程。8歲以上的孩
童、身體、感觀、智力比較弱，欠經驗和知識的人仕，在經過指導，說明安全
使用方法和知道可能的危險後，可以使用本機。
1. 使用前，請仔細閱讀本說明書。
2. 使用前，請先檢查所使用的電壓是否與本產品規定的相一致。
3. 請勿在規定范圍外使用本產品。
4. 不要與大功率電器共用一個供電插座使用。
5. 本產品只用於室內使用。
6. 本產品使用時切勿讓兒童、殘疾或智障人士靠近及使用。
7. 本產品不得用於兒童玩耍。
8. 當產品處於通電狀態及發熱時，請小心看管。
9. 當產品跌落過，或者電源線、插頭、導汽管有可見的損壞跡象便不要使用。
為了確保使用的安全，切勿擅自更換，請送回本公司的維修點檢查更換。
10.使用本機前必須先往水箱里注入清水。使用過程中，請經常注意水箱內的水
位。
11.請不要在機體內加入冷清水以外的任何液體。
12.請不要直接對人、動物或穿在身體上的衣物進行熨燙。
13.熨燙衣服時，蒸汽噴頭最好在垂直高度上使用，水平方向或向下使用都可能
導致滴水。
14.使用本機時，切勿將導汽管放在地上或折曲導汽管。
15.使用本機時，切勿接觸蒸汽噴頭面板、蒸汽，以免燙傷。
16.更換功能部件時，請關閉開關，待蒸汽噴頭蒸汽完全息滅後才能進行操作。
17.使用本機時，切勿拉導汽管來移動本機，應推動伸縮桿來移動本機。如遇到
困難，切勿勉強移動，請將水排清後再檢查輪子，排除故障。
18.使用本機時，電源線不要接觸到尖銳物體，防止電源線損傷。如要把電源線
拔離插座，必須用手握電源線插頭將其拔出，切勿用拉電源線方法拔插頭。
19.本機的配件為專用，切勿使用非本公司提供的配件，以免損壞機器或引起事
故。
20.使用本機時，對機器或配件應輕取輕放，避免損壞。
21.為讓本機更好為您服務，請定期對水箱進行清除水垢。
22.在收藏本機前，請先讓本機冷卻至少30分鐘以上，然後排清機內的水。
23.收藏機器，清將機器清潔後於通風乾燥處保存。
Table des matières
Autres manuels GILMAN Fer
