6
TEST AFTER INSTALLATION
1. Plug the adaptor power
2. Test the monitor by the following steps
a. Press the call button from door camera
b. Check and adjust bell volume
c. Check and adjust picture quality
d. Check and adjust speakerphone volume
3. Test the door camera by the following steps
a. Press the call button from door camera
b. Press-on the monitor’s speak-out button to talk
c. Press the monitor’s speakerphone button once
for hands-free speaking
d. Adjust the door camera’s speakerphone volume
from the back of door camera ( under a rubber
cover )
4. Read the instruction panel on monitor ( under a plastic
cover )
If magnetic switch is installed
Door open to light on
Door close to light off
If electric lock is installed
Press the lock release can cause a
power line loop to strike the lock
( The dry contact relay on monitor can
sustain maximum of 24VDC/1A power
current )
Call Button
Slide volume
selector
Brightness tuner
Sharpness tuner
Bell volume tuner
Speakerphone button (hands-free
2 way conversation)
Instruction
Speakerphone volume tuner
Speak-out button (1 way
speaking)
POWER
Power for
the lock Electric lock
Lock release
button
Door status
light indicator
Magnetic
switch
